Hello,
I just put OpenBSD 3.7 on a clunker to do some testing with pf/altq and
prioritizing VoIP. side note: (I had not done an install in a few
years, and it only took me maybe a half hour; configuring was also
painless, excellent sample configs!)
All went well and the machine is currently working as expected except for
one small problem. I have two nics in there, a built-in (sis0) and an old
3Com PCI (ep0), and while they both appear to work, sis0 has an all-zeros
MAC address, both in dmesg and ifconfig:
sis0 at pci0 dev 1 function 1 "SIS 900 10/100BaseTX" rev 0x83: irq 11,
address 00:00:00:00:00:00
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000760, model 0x0000, rev. 0
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:00:00:00:00:00
Looking at the list archives, I saw some mention of this with sis, but
dating back to 2003. I don't see anything on the current errata page
regarding this, so I thought I'd ask here.
The machine also paniced at some point today, not sure if that's related.
I did not have any hands there capable of driving ddb, so no core dump. I
have set "ddb.panic=0" in /etc/sysctl.conf which I believe should let me
get a coredump if it happens again. I'm also unsure how to build a kernel
with debugging symbols, so I'll have to dig some more for that.
Anyhow, any help is appreciated. dmesg follows...
Thanks,
Charles
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 936 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 265920512 (259688K)
avail mem = 235884544 (230356K)
using 3271 buffers containing 13398016 bytes (13084K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/22/01, BIOS32 rev. 0 @
0xfd960
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7660/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 630 PCI" rev 0x21
pciide0 at pci0 dev 0 function 1 "SIS 5513 EIDE" rev 0xd0: 630: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD200BB-00DEA0>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, 52X CDROM, 1.40> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pcib0 at pci0 dev 1 function 0 "SIS 85C503 System" rev 0x00
sis0 at pci0 dev 1 function 1 "SIS 900 10/100BaseTX" rev 0x83: irq 11,
address 00:00:00:00:00:00
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000760, model 0x0000, rev. 0
ohci0 at pci0 dev 1 function 2 "SIS 5597/5598 USB" rev 0x07: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 1 function 3 "SIS 5597/5598 USB" rev 0x07: irq 10,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 2 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6300" rev 0x21: aperture at 0xe0000000,
size 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ep0 at pci0 dev 9 function 0 "3Com 3c590 10Mbps" rev 0x00: address
00:a0:24:7d:b5:89, utp default utp/autoselect irq 9
cmpci0 at pci0 dev 15 function 0 "C-Media Electronics CMI8738/C3DX Audio"
rev 0x10: irq 5
audio0 at cmpci0
"C-Media Electronics HSP56 AMR" rev 0x10 at pci0 dev 15 function 1 not
configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f54d netmask ff4d ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
___
Charles Sprickman
NetEng/SysAdmin
Bway.net - New York's Best Internet - www.bway.net
[EMAIL PROTECTED] - 212.655.9344
