Just refer to this:

http://www.openbsd.org.my/faq/upgrade37.html


On 7/3/05, Aric Gregson <[EMAIL PROTECTED]> wrote:
> Hope this is the appropriate list for this. Have tried to upgrade to
> 3.7 from 3.6 for a while a now. Tried booting from binary 3.7 -release
> on a CD (which I burned), but repeatedly received
> 
>     halt code 5
>     HALT instruction executed
>     PC = fffffc0000230118
> 
> 'ps' on this yields:
> 
> >>>ps
> ID        PBC        PRI    CPU Time    Affinity   CPU   Program   State
> 0000002b  0015dac0   3             0    00000001    0         ps
> running
> 00000029  0017dec0   5           104    00000001    0    usbd cb
> waiting on
> usb callback
> 00000017  0017a840   3             1    00000001    0      shell   ready
> 0000000f  00173040   5             0    ffffffff    0    rx_ewa0
> waiting on
> rx_isr_ewa0
> 00000008  00166800   3             0    00000001    0    shell_0
> waiting on
> rxq_ready
> 00000006  000315a0   6             1    ffffffff    0  tt_control
> waiting on
> tt_control
> 00000004  0002cb00   7            12    ffffffff    0      timer
> waiting on
> timer
> 00000003  0002b6a0   2         38789    ffffffff    0       poll   ready
> 00000002  0002a480   6             0    ffffffff    0  dead_eater
> waiting on
> dead_beef
> 00000001  00147ac0   0         60676    00000001    0       idle   ready
> 
> 
> I then upgraded to 3.6 -stable (thinking was next best thing) via
> source upgrade. This went well after some work. I then tried to reboot
> from same CD with 3.7 on it, same error. I next downloaded the 3.7
> -release binaries to the drive and replaced the kernel with the new
> kernel and tried to reboot. That did not work and is where I am now. I
> have enclosed the results of 'trace' and 'ps' as instructed following
> the panic.
> 
> I have no idea where to go from here. Any suggestions on how to get 3.7
> installed and running??
> 
> thanks
> 
> ddb> trace
> Debugger(6, fffffc0000757b88, fffffc8580007aa0, c000, ffffffffffffffff,
> 8) at
> Debugger+0x4
> panic(fffffc0000734b30, fa, fffffc00001f3ad8, fffffc00001f3adc,
> fffffc00001f3ae0, fffffc00007bfd00) at panic+0x130
> dec_550_intr_map(?, ?, ?, ?, ?, fffffc00007bfd00) at
> dec_550_intr_map+0x190
> ohci_pci_attach(?, ?, ?, ?, ?, fffffc0000bfd00) at ohci_pci_attach+0x1a8
> config_attach(?, ?, ?, ?, ?, fffffc0000bfd00) at config_attach+0x244
> config_found_sm(?, ?, ?, ?, ?, fffffc0000bfd00) at config_found_sm+0x54
> pciattach(?, ?, ?, ?, ?, fffffc0000bfd00) at pciattach+0x31c
> config_attach(?, ?, ?, ?, ?, fffffc0000bfd00) at config_attach+0x244
> config_found_sm(?, ?, ?, ?, ?, fffffc0000bfd00) at config_found_sm+0x54
> ciaattach(?, ?, ?, ?, ?, fffffc0000bfd00) at ciaattach+0x34c
> config_attach(?, ?, ?, ?, ?, fffffc0000bfd00) at config_attach+0x244
> config_found_sm(?, ?, ?, ?, ?, fffffc0000bfd00) at config_found_sm+0x54
> alpha_XXX_dmamap(?, ?, ?, ?, ?, fffffc0000bfd00) at
> alpha__XXX_dmamap+0x1c0
> config_attach(?, ?, ?, ?, ?, fffffc0000bfd00) at config_attach+0x244
> config_rootfound(?, ?, ?, ?, ?, fffffc0000bfd00) at
> config_rootfound+0x78
> cpu_configure(?, ?, ?, ?, ?, fffffc0000bfd00) at cpu_configure+0x48
> main(?, ?, ?, ?, ?, fffffc0000bfd00) at main+0x474
> __start(?, ?, ?, ?, ?, fffffc0000bfd00) at __start+0x64
> __start(?, ?, ?, ?, ?, fffffc0000bfd00) at __start+0x64
> __start(?, ?, ?, ?, ?, fffffc0000bfd00) at __start+0x64
> __start(?, ?, ?, ?, ?, fffffc0000bfd00) at __start+0x64
> --db_more--
> 
> > ps
>     PID    PPID    PGRP    UID    S    FLAGS    WAIT    COMMAND
> *    0      -1      0       0     7   0x80204           swapper
> 
> 


-- 
Thanks & Regards,
Ikmal aka EvoIVGSR

http://www.leakage.org/
http://root.justdied.com/mylife/
http://www.openbsd.org.my/
http://mirrors.mybsd.org.my/

Reply via email to