On Mon, Jun 27, 2005 at 04:23:27PM -0700, Gregory Steuck wrote:
> Bernd, xl(4) is what you will get this message through. Although I am
> using 3c905 (not b). Here is my dmesg from stock 3.7 release kernel:
> ...
> xl0 at pci0 dev 13 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 5,
address 00:60:08:xx:xx:xx
This is very strange. The following is the output I get when booting
from the AMD64 CD-Rom of the official (purchasable) CD set:
----------------------------------------------------------------------
OpenBSD 3.7 (RAMDISK_CD) #284: Sun Mar 20 01:02:23 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2147020800 (2096700K)
avail mem = 1837428736 (1794364K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2200.39 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "Nvidia", unknown product 0x0331 rev
0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
"Creative Labs SoundBlaster Live" rev 0x07 at pci0 dev 7 function 0 not
configured
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci0 dev 7 function 1 not
configured
"3Com 3c905B 100Base-TX" rev 0x24 at pci0 dev 8 function 0 not configured
"Promise PDC20378" rev 0x02 at pci0 dev 13 function 0 not configured
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 14 function 0 not configured
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 10 for native-PCI interrupt
wd0 at pciide0 channel 1 drive 0: <Maxtor 6Y200M0>
wd0: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-2510A, 2.15> SCSI0 5/cdrom
removable
atapiscsi1 at pciide1 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <PLEXTOR, DVD-ROM PX-116A3, 1.00> SCSI0 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
"VIA VT8237 ISA" rev 0x00 at pci0 dev 17 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
rd0: fixed, 3584 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft SideWinder Joystick, rev 1.10/1.01, addr 2, iclass 3/0
uhid at uhidev0 not configured
uhub1: device problem, disabling port 1
----------------------------------------------------------------------
as a comparison, I get the following if I boot from the i386 CD from
the same CD set:
----------------------------------------------------------------------
OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Athlon(tm) 64 Processor 3400+ ("AuthenticAMD" 686-class) 2.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2
real mem = 2147000320 (2096680K)
avail mem = 1954185216 (1908384K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/23/04, BIOS32 rev. 0 @ 0xfda90
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7bc0/240 (13 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3227
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf800 0xcf800/0x4000! 0xe0000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "Nvidia", unknown product 0x0331 rev
0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
"Creative Labs SoundBlaster Live" rev 0x07 at pci0 dev 7 function 0 not
configured
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci0 dev 7 function 1 not
configured
xl0 at pci0 dev 8 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 3, address
00:10:4b:6a:94:92
exphy0 at xl0 phy 24: 3Com internal media interface
"Promise PDC20378" rev 0x02 at pci0 dev 13 function 0 not configured
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 14 function 0 not configured
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 10 for native-PCI interrupt
wd0 at pciide0 channel 1 drive 0: <Maxtor 6Y200M0>
wd0: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-2510A, 2.15> SCSI0 5/cdrom
removable
atapiscsi1 at pciide1 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <PLEXTOR, DVD-ROM PX-116A3, 1.00> SCSI0 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
----------------------------------------------------------------------
Regards,
Bernd
[demime 1.01d removed an attachment of type application/pgp-signature which had
a name of signature.asc]
