The dmesg for OpenBSD/i386 (-CURRENT) shows things about the IRQ routing table,
anyone who can provide me some more info about what could be going wrong?
OpenBSD 3.7-current (GENERIC) #204: Fri Jun 24 21:25:02 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3200+ ("AuthenticAMD" 686-class, 512KB L2 cach
e) 1.99 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,MMX,FXSR,SSE,SSE2
cpu0: AMD Powernow: FID VID TTP TM
real mem = 468230144 (457256K)
avail mem = 420102144 (410256K)
using 4278 buffers containing 23515136 bytes (22964K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(37) BIOS, date 02/03/05, BIOS32 rev. 0 @ 0xf9fd0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcd44
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfcc10/272 (15 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 17 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 3 5 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
WARNING: can't reserve area for BIOS PROM.
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: irq 3, version 1.0, l
egacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x00: irq 3, version 1.0, l
egacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x00: irq 3
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
"ATI IXP400 SMBus" rev 0x04 at pci0 dev 20 function 0 not configured
pciide0 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x00: DMA (unsupported),
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 5T040H4>
wd0: 16-sector PIO, LBA, 39083MB, 80043264 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x00
pci2 at ppb1 bus 2
twe0 at pci2 dev 2 function 0 "3ware Escalade IDE RAID" rev 0x01: irq 11
twe0: Escalade V1.3
scsibus0 at twe0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <3WARE, Host drive #00, > SCSI2 0/direct fixed
sd0: 152636MB, 152636 cyl, 64 head, 32 sec, 512 bytes/sec, 312598784 sec total
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 10 address 00:11:09:fa
:e5:b5
rlphy0 at rl0 phy 0: RTL internal phy
"VIA VT6306 FireWire" rev 0x80 at pci2 dev 4 function 0 not configured
"ATI IXP400 AC'97" rev 0x00 at pci0 dev 20 function 5 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: sd0 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
----------------------------------------------------------------
This message has been sent through ihosting.be
To report spamming or other unaccepted behavior
by a iHosting customer, please send a message
to [EMAIL PROTECTED]
----------------------------------------------------------------
