Has anyone seen this issue before?
# ifconfig hme0
hme0: flags=8063<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
address: 00:00:00:00:00:00
description: public_if
media: Ethernet 100baseTX full-duplex (100baseTX)
status: active
inet 10.9.9.13 netmask 0xffffffe0 broadcast 10.9.9.31
$ arp -na
[snip]
? (10.9.9.13) at 00:00:00:00:00:00 on hme0 static
How in the hell did I get a MAC address of all 0's? And is there anything
that I can do to fix it? The address on the host is configure statically and
no DHCP is involved.
What's weird is that hosts on the local network can connect to it, but a
host that is doing rdr through pf constantly sends out ARP requests for the
mac address of the host.
Here's a dmesg. Thanks for any help
- Eric
syncing disks... console is /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL
PROTECTED]/[EMAIL PROTECTED],400000:a
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.7 (GENERIC) #431: Sun Mar 20 14:10:02 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 134217728
avail memory = 110485504
using 819 buffers containing 6709248 bytes of memory
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL
PROTECTED],0
mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 400MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 400 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64
b/l)
psycho0 at mainbus0 addr 0xfffc4000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTDB: 10bc0000 to 10c40000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: no keyboard
com0 at ebus0 addr 3062f8-3062ff ipl 42, mouse: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34: polled
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not
configured
clock1 at ebus0 addr 0-1fff: mk48t59: hostid 0
flashprom at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ipl 35 ipl 36: nvaddrs 0
audio0 at audioce0
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: address 00:00:00:00:00:00
nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1
hme0: using ivec 3021 for interrupt
vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c
wsdisplay0 at vgafb0
wsdisplay0: screen 0 added (std, sun emulation)
pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 1820 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST320420A>
wd0: 16-sector PIO, LBA, 19458MB, 39851760 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8483B, 1.02> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
pcons at mainbus0 not configured
No counter-timer -- using %tick at 400MHz as system clock.
root on wd0a
rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02
