On Fri, Jun 17, 2005 at 11:15:28AM -0500, Rick Pettit wrote:
> I just loaded a recent 3.7 snapshot and now I seem to be having APM issues.

please try -current.

> 
> Not long ago I was running a 3.6 snapshot and didn't have problems with a
> "sudo reboot" or a "sudo shutdown -h -p now". I was also able to unplug A/C
> power without locking up the machine.
> 
> Now, when I perform a "sudo reboot" or a "sudo shutdown -h -p now" I see the
> message indicating syncing completed and that the machine is rebooting or 
> shutting down but then it just stops and I have to manually reset.
> 
> When I unplug A/C power the machine locks up and the fan spins like mad.
> 
> Here are the current sysctl settings relevant to apm:
> 
>   [EMAIL PROTECTED] /home/rpettit $ sysctl -a | grep apm
>   machdep.apmwarn=5
>   machdep.apmhalt=1
> 
> Last but not least, here is the dmesg:
> 
> OpenBSD 3.7-current (GENERIC) #189: Fri Jun 10 14:44:35 MDT 2005
>     [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 848 MHz
> cpu0: 
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem  = 267927552 (261648K)
> avail mem = 237666304 (232096K)
> using 3296 buffers containing 13500416 bytes (13184K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 07/02/02, BIOS32 rev. 0 @ 0xffe90
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 98%
> apm0: AC on, battery charge high, charging, estimated 9:25 hours
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbc20/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 
> 0x00)
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc0000/0x10000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active, 7Kb/sec
> ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x02
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Rage 128 Mobility MF" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x02
> pci2 at ppb1 bus 2
> esa0 at pci2 dev 3 function 0 "ESS Maestro 3" rev 0x10: irq 5
> ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
> ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
> audio0 at esa0
> ppb2 at pci2 dev 6 function 0 unknown vendor 0x1668 product 0x0100 rev 0x11
> pci3 at ppb2 bus 3
> fxp0 at pci3 dev 4 function 0 "Intel 82557" rev 0x08, i82559: irq 10, address 
> 00:20:e0:64:07:72
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> "AT&T/Lucent LTMODEM" rev 0x01 at pci3 dev 8 function 0 not configured
> cbb0 at pci2 dev 15 function 0 "Texas Instruments PCI4451 CardBus" rev 0x00: 
> irq 10
> cbb1 at pci2 dev 15 function 1 "Texas Instruments PCI4451 CardBus" rev 0x00: 
> irq 10
> "Texas Instruments PCI4451 FireWire" rev 0x00 at pci2 dev 15 function 2 not 
> configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0x20
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x02: DMA, channel 
> 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23EA-40>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LG, DVD-ROM DRN8080B, 1.11> SCSI0 5/cdrom 
> removable
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x02: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ef4d netmask ef4d ttymask ffcf
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub0 port 1 configuration 1 interface 0
> uhidev0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
> ums0 at uhidev0: 5 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   This is the result of a manual reset when removing A/C power locked up the
>   machine.
> 
> -Rick

-- 
   Alexander Yurchenko (aka grange)

Reply via email to