Hi list,
I'm trying to upgrade a server from 3.6 to 3.7 and have experienced some
troubles. 3.6 runs like a charm.
bsd and bsd.rd show me the same error.
Any advice on this one would be very welcome.
OpenBSD 3.6-stable (GENERIC) #1: Wed Apr 6 20:23:57 CEST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class) 1.68 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073258496 (1048104K)
avail mem = 972591104 (949796K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(38) BIOS, date 10/14/03, BIOS32 rev. 0 @ 0xfb3f0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 5 7 9 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x800 0xca000/0x4800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Nvidia nForce2 PCI" rev 0xc1
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "Nvidia nForce2 ISA" rev 0xa4
"Nvidia nForce2 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ppb0 at pci0 dev 8 function 0 "Nvidia nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
skc0 at pci1 dev 4 function 0 "Marvell SKv2" rev 0x13: irq 5
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0 at skc0 port A: address 00:0c:6e:fa:a5:9e
eephy0 at sk0 phy 0: Marvell 88E1000* Gigabit PHY
vga1 at pci1 dev 6 function 0 vendor "Avance Logic", unknown product
0x2501 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xl0 at pci1 dev 7 function 0 "3Com 3c905B 100Base-TX" rev 0x34: irq 12,
address 00:50:04:9e:7e:47
exphy0 at xl0 phy 24: 3Com internal media interface
pciide0 at pci1 dev 11 function 0 "CMD Technology SiI3112 SATA" rev
0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080M0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080M0>
wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 9 function 0 "Nvidia nForce2 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
ppb1 at pci0 dev 30 function 0 "Nvidia nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efc5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class) 1.68 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073258496 (1048104K)
avail mem = 972713984 (949916K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(38) BIOS, date 10/14/03, BIOS32 rev. 0 @ 0xfb3f0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 5 7 9 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x800 0xca000/0x4800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Nvidia nForce2 PCI" rev 0xc1
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "Nvidia nForce2 ISA" rev 0xa4
"Nvidia nForce2 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ppb0 at pci0 dev 8 function 0 "Nvidia nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
skc0 at pci1 dev 4 function 0 "Marvell SKv2" rev 0x13: irq 5
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3 (0x7)
sk0 at skc0 port A: address 00:0c:6e:fa:a5:9e
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
vga1 at pci1 dev 6 function 0 vendor "Avance Logic", unknown product
0x2501 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xl0 at pci1 dev 7 function 0 "3Com 3c905B 100Base-TX" rev 0x34: irq 12,
address 00:50:04:9e:7e:47
exphy0 at xl0 phy 24: 3Com internal media interface
pciide0 at pci1 dev 11 function 0 "CMD Technology SiI3112 SATA" rev
0x02: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080M0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080M0>
wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
pciide1 at pci0 dev 9 function 0 "Nvidia nForce2 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
ppb1 at pci0 dev 30 function 0 "Nvidia nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efc5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
pciide0 channel 0: reset failed for drive 0
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00
pciide0 channel 0: reset failed for drive 0
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00
It continues here ....
Kind regards,
Hans
