Hi,
I'm having a problem installing modules using CPAN on a fresh 3.7
install. I have re-run 'o conf init' twice and popped all of my mirrors
and tried new ones to no avail. This problem first came up in Jan2004
here: http://www.monkey.org/openbsd/archive/misc/0401/msg00801.html.
The solution posted here
http://www.monkey.org/openbsd/archive/misc/0401/msg00806.html indicates
that OpenBSD's gzip has a different exit code than GNU gzip when run on
things like gzip: /root/.cpan/sources/modules/03modlist.data. A patch
was submitted that appeared to solve their problem.
My error is:
>cpan install Bundle::CPAN
Going to read /root/.cpan/sources/authors/01.mailrc.txt.gz
Going to read /root/.cpan/sources/modules/02packages.details.gz
Warning: Your /root/.cpan/sources/modules/02packages.details.txt.gz does
not contain a Line-Count header.
Please check the validity of the index file by comparing it to more than
one CPAN mirror. I'll continue but problems seem likely to happen.
Warning: Your /root/.cpan/sources/modules/02packages.details.txt.gz does
not contain a Line-Count header.
Please check the validity of the index file by comparing it to more than
one CPAN mirror. I'll continue but problems seem likely to happen.
......
(more errors like the one below but they scroll by too fast for me to catch)
a ton of "Use of uninitialized value in pattern match (m//) at
/usr/libdata/perl5/CPAN.pm line 3195, <GEN8> line 1445.
Any ideas would be greatly appreciated. Thanks,
- Matt
(dmesg follows)
OpenBSD 3.7 (GENERIC) #0: Tue May 31 20:56:03 PDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 332 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 167354368 (163432K)
avail mem = 145965056 (142544K)
using 2068 buffers containing 8470528 bytes (8272K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c8) BIOS, date 04/14/98, BIOS32 rev. 0 @ 0xec700
pcibios0 at bios0: rev 2.1 @ 0xec700/0x3900
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf69e0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:20:0 ("Intel 82371AB PIIX4 ISA"
rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xe0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 GD" rev 0x5c
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 13 function 0 "Intel 82557" rev 0x05, i82558: irq 11,
address 00:08:c7:45:02:ce
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
dc0 at pci0 dev 14 function 0 "ADMtek AN983" rev 0x11: irq 11, address
00:06:25:48:b1:96
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000749, model 0x0001, rev. 1
vendor "US Robotics", unknown product 0x1007 (class communications
subclass miscellaneous, rev 0x00) at pci0 dev 15 function 0 not configured
pcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST33221A>
wd0: 32-sector PIO, LBA, 3098MB, 6346368 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080P0>
wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, 56X CD-ROM, 4.18> SCSI0 5/cdrom removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 20 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef45 netmask ef45 ttymask ffc7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uid 0 on /usr: file system full
syncing disks... done
rebooting...
OpenBSD 3.7 (GENERIC) #0: Tue May 31 20:56:03 PDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 332 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 167354368 (163432K)
avail mem = 145965056 (142544K)
using 2068 buffers containing 8470528 bytes (8272K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c8) BIOS, date 04/14/98, BIOS32 rev. 0 @ 0xec700
pcibios0 at bios0: rev 2.1 @ 0xec700/0x3900
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf69e0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:20:0 ("Intel 82371AB PIIX4 ISA"
rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xe0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 GD" rev 0x5c
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 13 function 0 "Intel 82557" rev 0x05, i82558: irq 11,
address 00:08:c7:45:02:ce
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
dc0 at pci0 dev 14 function 0 "ADMtek AN983" rev 0x11: irq 11, address
00:06:25:48:b1:96
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000749, model 0x0001, rev. 1
vendor "US Robotics", unknown product 0x1007 (class communications
subclass miscellaneous, rev 0x00) at pci0 dev 15 function 0 not configured
pcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST33221A>
wd0: 32-sector PIO, LBA, 3098MB, 6346368 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080P0>
wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, 56X CD-ROM, 4.18> SCSI0 5/cdrom removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 20 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef45 netmask ef45 ttymask ffc7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x47
SENSE KEY: Illegal Request
ASC/ASCQ: Illegal Field in CDB
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x47
SENSE KEY: Illegal Request
ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x47
SENSE KEY: Illegal Request
ASC/ASCQ: Illegal Mode For This Track
syncing disks... done
rebooting...
OpenBSD 3.7 (GENERIC) #0: Tue May 31 20:56:03 PDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 332 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 167354368 (163432K)
avail mem = 145965056 (142544K)
using 2068 buffers containing 8470528 bytes (8272K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c8) BIOS, date 04/14/98, BIOS32 rev. 0 @ 0xec700
pcibios0 at bios0: rev 2.1 @ 0xec700/0x3900
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf69e0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:20:0 ("Intel 82371AB PIIX4 ISA"
rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xe0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 GD" rev 0x5c
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 13 function 0 "Intel 82557" rev 0x05, i82558: irq 11,
address 00:08:c7:45:02:ce
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
dc0 at pci0 dev 14 function 0 "ADMtek AN983" rev 0x11: irq 11, address
00:06:25:48:b1:96
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000749, model 0x0001, rev. 1
vendor "US Robotics", unknown product 0x1007 (class communications
subclass miscellaneous, rev 0x00) at pci0 dev 15 function 0 not configured
pcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST33221A>
wd0: 32-sector PIO, LBA, 3098MB, 6346368 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080P0>
wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, 56X CD-ROM, 4.18> SCSI0 5/cdrom removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 20 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef45 netmask ef45 ttymask ffc7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
