Bill Marquette wrote:
On 6/2/05, Sean Knox <[EMAIL PROTECTED]> wrote:
Hey Bill-
Is IRQ sharing done in BIOS? I'm using 2 onboard em(4) NICs and a dual
port em(4) on a Supermicro 6023P-8:
This was all done in BIOS on HP DL380's.
The Supermicro BIOS (forgot the brand offhand) doesn't allow for setting
IRQs manually, but one of the 133mhz slots shares an IRQ with the
onboard NICs.
em0 at pci3 dev 1 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x03:
irq 12, address: 00:04:23:a7:b4:4c
em1 at pci3 dev 1 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x03:
irq 12, address: 00:04:23:a7:b4:4d
em2 at pci3 dev 2 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
irq 12, address: 00:30:48:2c:95:e8
em3 at pci3 dev 2 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
irq 12, address: 00:30:48:2c:95:e9
That should help a good deal.
* ensure PCI card is in 133mhz slot (pretty sure it is)
This never hurts :)
...but what does it hurt is installing the NIC in a 66mhz slot. Ouch.
I'll have to wait until next week to try this fix in the primary
firewall; I'll report back to the group when that's done. Thanks again.
cheers,
sk
