Hi,
I am trying to run adsm under OpenBSD 3.7 . I had been doing
with 3.6 this worked fine. But with 3.7 The systerm starts to freeze
when I am Transferring large amounts of data.
The system does not unfreeze when the programm has exited.
It stays unusable on the console (serial) and will sporadicly respond to
pings (2 Answers in five minutes)
Manon
OpenBSD 3.7 (GENERIC) #6: Tue Apr 19 07:08:30 CEST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.06 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 2146906112 (2096588K)
avail mem = 1953128448 (1907352K)
using 4278 buffers containing 107446272 bytes (104928K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 04/08/04, BIOS32 rev. 0 @ 0xfd7d1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5 SouthBridge"
rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x4000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00
pci1 at pchb2 bus 1
mpt0 at pci1 dev 1 function 0 "Symbios Logic 53c1030" rev 0x07: irq 9
mpt0: sending FW Upload request to IOC (size: 36, img size: 67560)
mpt0: IM support: 4
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST336753LC FN, B85B> SCSI3
0/direct fixed
sd0: 34715MB, 31310 cyl, 4 head, 567 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM-ESXS, ST336753LC FN, B85B> SCSI3
0/direct fixed
sd1: 34715MB, 31310 cyl, 4 head, 567 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
skc0 at pci1 dev 2 function 0 "Schneider & Koch SK-9821 v2.0" rev 0x20: irq
3
skc0: Marvell Yukon Gigabit Ethernet (0x1)
sk0 at skc0 port A: address 00:00:5a:9f:38:09
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
vga1 at pci0 dev 2 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb3 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pci2 at pchb3 bus 3
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-224E, 2.9B> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq
11, version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
pchb4 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05
pchb5 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05
pci3 at pchb5 bus 2
bge0 at pci3 dev 1 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): irq 10 address 00:0d:60:d4:0a:16
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci3 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): irq 11 address 00:0d:60:d4:0a:17
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fbe5 netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: sd0 matched BIOS disk 80
dkcsum: sd1 matched BIOS disk 81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
[demime 1.01d removed an attachment of type application/pgp-signature]
