Hello,
Well I was all excited about getting my new amd64 system, but it seems
to be slower than my pentium 3 system.
This is what it looks like when I was doing a make install in the ports system.
load averages: 1.17, 1.15, 1.14
07:36:16
34 processes: 1 running, 32 idle, 1 on processor
CPU states: 12.9% user, 0.0% nice, 1.4% system, 85.7% interrupt, 0.0% idle
Memory: Real: 117M/381M act/tot Free: 1547M Swap: 0K/391M used/tot
The interrupt levels change a bit but still stay above 80% :(
I think my motherboard is not fully supported. It has sata, but I am
not using it. Just simple old school ata100. For a better right up of
my motherboard check out
http://www.ncix.com/products/index.php?sku=14057&vpn=MS-7093-040&manufacture=MicroStar
Dmesg is attached below.
Thank you to anybody that can help and let me know if you need more info,
Richard
dmesg:
OpenBSD 3.7 (GENERIC) #31: Sun Mar 20 00:42:28 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2078863360 (2030140K)
avail mem = 1777565696 (1735904K)
using 22937 buffers containing 208093184 bytes (203216K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1791.09 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5950 rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x5a3f rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 vendor "ATI", unknown product 0x5954 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 17 function 0 vendor "ATI", unknown product 0x437a
rev 0x00: DMA (unsupported), channel 0 configured to native-PCI,
channel 1 configured to native-PCI
pciide0: using irq 10 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
pciide1 at pci0 dev 18 function 0 vendor "ATI", unknown product 0x4379
rev 0x00: DMA (unsupported), channel 0 configured to native-PCI,
channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
pciide1: channel 0 ignored (not responding; disabled or no drives?)
pciide1: channel 1 ignored (not responding; disabled or no drives?)
ohci0 at pci0 dev 19 function 0 vendor "ATI", unknown product 0x4374
rev 0x00: irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 vendor "ATI", unknown product 0x4375
rev 0x00: irq 10, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 vendor "ATI", unknown product 0x4373
rev 0x00: irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 8 ports with 8 removable, self powered
vendor "ATI", unknown product 0x4372 (class serial bus subclass SMBus,
rev 0x04) at pci0 dev 20 function 0 not configured
pciide2 at pci0 dev 20 function 1 vendor "ATI", unknown product 0x4376
rev 0x00: DMA (unsupported), channel 0 configured to compatibility,
channel 1 configured to compatibility
wd0 at pciide2 channel 0 drive 0: <ST380011A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1 at pciide2 channel 0 drive 1: <WDC WD205AA>
wd1: 16-sector PIO, LBA, 19569MB, 40079088 sectors
atapiscsi0 at pciide2 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD DD 2X16X4X16, G7L9> SCSI0
5/cdrom removable
vendor "ATI", unknown product 0x4377 (class bridge subclass ISA, rev
0x00) at pci0 dev 20 function 3 not configured
ppb1 at pci0 dev 20 function 4 vendor "ATI", unknown product 0x4371 rev 0x00
pci2 at ppb1 bus 2
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 5 address
00:11:09:18:9c:ea
rlphy0 at rl0 phy 0: RTL internal phy
"VIA VT6306 FireWire" rev 0x80 at pci2 dev 4 function 0 not configured
vendor "ATI", unknown product 0x4370 (class multimedia subclass audio,
rev 0x00) at pci0 dev 20 function 5 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wd0: no disk label
dkcsum: wd0 matched BIOS disk 81
dkcsum: wd1 matched BIOS disk 80
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/21.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 1.10/21.00, addr 2, iclass 3/1
uhidev1: 4 report ids
ums0 at uhidev1 reportid 1: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=3, output=0, feature=0
