Good Day!
On Wed, May 11, 2005 at 04:55:51PM -0400, Daniel Ouellet wrote:
<SNIP>
> The one I have still doesn't work, even with 3.7
What were the bge problems you experienced?
> I put an Intel card in for that.
>
> I disable it in the BIOS, but as far as the rest of it is concern, this
> is a kicking as* box big time!
>
> Daniel
We have 10 boxes of them. They bge's work fine, amd64[0] and
i386[1] dmesg inlined. Both are OPENBSD_3_7 GENERIC, had to disable
pcibios on the i386 kernel.
There were some bge wierdness with carp, just did'nt have the
time to dig futher.
Aside from the pcibios probs on 3.7 i386, we did'nt have
problems with ours. And they are blazing fast! ;)
Mabuhay! barryg
[0]
OpenBSD 3.7 (GENERIC) #0: Tue Apr 5 03:34:46 PHT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2096700K)
avail mem = 1836695552 (1793648K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 248, 2191.67 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 "AMD 8131 PCIX" rev 0x12
pci1 at ppb0 bus 3
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 1 function 1 not configured
ppb1 at pci0 dev 2 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x03, BCM5704 A3
(0x2003): irq 10 address 00:00:1a:1a:3a:6c
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x03, BCM5704 A3
(0x2003): irq 11 address 00:00:1a:1a:3a:6b
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 2 function 1 not configured
ppb2 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci3 at ppb2 bus 1
ohci0 at pci3 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 10, version 1.0,
legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci3 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 10, version 1.0,
legacy support
ohci1: SMM does not respond, resetting
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci3 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"AMD AMD8111 LPC" rev 0x05 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
[1]
OpenBSD 3.7 (NO_PCIBIOS) #0: Thu Apr 21 19:56:32 PHT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/NO_PCIBIOS
cpu0: AMD Opteron(tm) Processor 248 ("AuthenticAMD" 686-class) 2.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
real mem = 2147000320 (2096680K)
avail mem = 1953103872 (1907328K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0010
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ppb0 at pci0 dev 1 function 0 "AMD 8131 PCIX" rev 0x12
pci1 at ppb0 bus 3
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 1 function 1 not configured
ppb1 at pci0 dev 2 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x03, BCM5704 A3
(0x2003): irq 10 address 00:00:1a:1a:3e:f3
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x03, BCM5704 A3
(0x2003): irq 11 address 00:00:1a:1a:3e:f4
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 2 function 1 not configured
ppb2 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci3 at ppb2 bus 1
ohci0 at pci3 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 10, version 1.0,
legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci3 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 10, version 1.0,
legacy support
ohci1: SMM does not respond, resetting
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci3 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD AMD8111 LPC" rev 0x05
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask f7ed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
--
Barry Dexter A. Gonzaga, bofh
[EMAIL PROTECTED]
