Hi all, I have problem with openbsd 3.7.
Here was my method when doing cvs. cvs -d [EMAIL PROTECTED]:/cvs -q up -rOPENBSD_3_7 -P src Here was my problem. # pfctl -sa pfctl: DIOCGETRULES: Permission denied pfctl: DIOCGETRULES: Permission denied No queue in use pfctl: DIOCGETSTATUS: Permission denied pfctl: DIOCGETRULES: Permission denied TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 30s udp.first 60s udp.single 30s udp.multiple 60s icmp.first 20s icmp.error 10s other.first 60s other.single 30s other.multiple 60s frag 30s interval 10s adaptive.start 0 states adaptive.end 0 states src.track 0s LIMITS: states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 As attach was my dmesg and uname. p/s: Please cc to my email since I not following [EMAIL PROTECTED] Thanks Thanks & Regards, Ikmal. ----------------------------------------------- http://www.leakage.org/ http://root.justdied.com/mylife http://www.openbsd.org.my/ http://mirrors.mybsd.org.my/ # pfctl -sa pfctl: DIOCGETRULES: Permission denied pfctl: DIOCGETRULES: Permission denied No queue in use pfctl: DIOCGETSTATUS: Permission denied pfctl: DIOCGETRULES: Permission denied TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 30s udp.first 60s udp.single 30s udp.multiple 60s icmp.first 20s icmp.error 10s other.first 60s other.single 30s other.multiple 60s frag 30s interval 10s adaptive.start 0 states adaptive.end 0 states src.track 0s LIMITS: states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 # dmesg OpenBSD 3.7 (GENERIC) #0: Wed May 11 17:26:39 MYT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID real mem = 536195072 (523628K) avail mem = 482361344 (471056K) using 4278 buffers containing 26910720 bytes (26280K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/05, BIOS32 rev. 0 @ 0xffe90 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc570/144 (7 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x25a1 pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 0xec000/0x4000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02 ppb0 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02 pci1 at ppb0 bus 1 em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq 3, address: 00:12:3f:25:18:4e ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 pci2 at ppb1 bus 2 uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 10 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 7 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: single transaction translator uhub2: 4 ports with 4 removable, self powered ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a pci3 at ppb2 bus 3 em1 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541EI)" rev 0x00: irq 11, address: 00:12:3f:25:18:4f vga1 at pci3 dev 14 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd0 at pciide0 channel 1 drive 0: <ST380013AS> wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 "Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ffe5 netmask ffed ttymask ffef pctr: user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 # uname -a OpenBSD mybox 3.7 GENERIC#0 i386
