The Whole thing some how seam to be specific to this machine
doing the same stuff on a an other machine (Intel SE7501WV2 Board
<http://www.intel.com/design/servers/SE7501WV2/> ) does not have any of
these Problems:
Dmesg of the machine w/o Problems
dmesg
OpenBSD 3.7 (GENERIC) #6: Tue Apr 19 07:08:30 CEST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 536367104 (523796K)
avail mem = 482635776 (471324K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/24/03, BIOS32 rev. 0 @ 0xfdb54
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf35d0/336 (19 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2480
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5200! 0xe4000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 MCH Host" rev 0x01
"Intel E7500 DRAM" rev 0x01 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 3 function 0 "Intel E7500 MCH HI_C vppb 1" rev 0x01
pci1 at ppb0 bus 1
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci2 at ppb1 bus 2
gdt0 at pci2 dev 8 function 0 "Intel GDT RAID" rev 0x00: irq 9 dpmem
fa000000 2-bus 1 cache device
gdt0: ver 222, cache on, strategy 2, writeback on, blksz 32
gdt0: raw feat 1 cache feat 101
scsibus0 at gdt0: 35 targets
sd0 at scsibus0 targ 0 lun 0: <ICP, Host drive #00, > SCSI2 0/direct fixed
sd0: 16990MB, 2166 cyl, 255 head, 63 sec, 512 bytes/sec, 34796790 sec total
scsibus1 at gdt0: 16 targets
scsibus2 at gdt0: 16 targets
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
em0 at pci3 dev 7 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
9, address: 00:07:e9:24:9b:fc
em1 at pci3 dev 7 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
9, address: 00:07:e9:24:9b:fd
ppb3 at pci3 dev 10 function 0 "IBM PCIX-PCIX" rev 0x02
pci4 at ppb3 bus 4
em2 at pci4 dev 4 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq
9, address: 00:04:23:08:23:f4
em3 at pci4 dev 4 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq
9, address: 00:04:23:08:23:f5
em4 at pci4 dev 6 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq
9, address: 00:04:23:08:23:f6
em5 at pci4 dev 6 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq
9, address: 00:04:23:08:23:f7
"Intel E7500 MCH HI_C vppb 2" rev 0x01 at pci0 dev 3 function 1 not
configured
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci5 at ppb4 bus 5
vga1 at pci5 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N101> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
--On 5. Mai 2005 03:27:29 +0200 Manon Goo <[EMAIL PROTECTED]> wrote:
> Does this look like a hardware error ? I had problems withe this machine
> before.
> Does this look like a buggy em(4) Card ? The machine is a IBM x345
>
>
> Manon
>
>
>
> ifconfig em5 down
> acheron02:~ root[0]# ifconfig vlan
> vlan1124: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> address: 00:04:23:9e:e6:6a
> vlan: 1124 parent interface: em4
> inet6 fe80::204:23ff:fe9e:e66a%vlan1124 prefixlen 64 scopeid 0xb
> inet XXX.XXX.YYY.19 netmask 0xfffffff8 broadcast 2XXX.XXX.YYY.23
> vlan1146: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> address: 00:04:23:9e:e6:6a
> vlan: 1146 parent interface: em4
> inet6 fe80::204:23ff:fe9e:e66a%vlan1146 prefixlen 64 scopeid 0xc
> inet XXX.XXX.YYY.27 netmask 0xfffffff8 broadcast XXX.XXX.YYY.23
> vlan300: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
> 1500 address: 00:04:23:9e:e6:6b
> vlan: 300 parent interface: em5
> inet6 fe80::204:23ff:fe9e:e66b%vlan300 prefixlen 64 scopeid 0xd
> inet AAA.BBB.CCC.218 netmask 0xffffffe0 broadcast AAA.BBB.CCC.223
> vlan400: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
> 1500 address: 00:04:23:9e:e6:6b
> vlan: 400 parent interface: em5
> inet6 fe80::204:23ff:fe9e:e66b%vlan400 prefixlen 64 scopeid 0xe
> inet AAA.BBB.CCC.246 netmask 0xfffffff0 broadcast AAA.BBB.CCC.255
> acheron02:~ root[0]# ifconfig carp
> carp300: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> carp: MASTER carpdev vlan300 vhid 2 advbase 1 advskew 10
> inet AAA.BBB.CCC.219 netmask 0xffffffe0 broadcast AAA.BBB.CCC.223
> carp400: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> carp: MASTER carpdev vlan400 vhid 1 advbase 1 advskew 10
> inet AAA.BBB.CCC.247 netmask 0xfffffff0 broadcast AAA.BBB.CCC.255
> acheron02:~ root[0]# ifconfig em5 up
> acheron02:~ root[0]# panic: pool_get(mclpl): free list modified:
> magic=1beef; page 0xde4b0000; item addr 0xde4b0800
> Stopped at Debugger+0x4: leave
> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS
> PANIC! DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT
> INFORMATION! ddb> trace
> Debugger(d0570480,13,42731eec,de4b0800,d05b7cc0) at Debugger+0x4
> panic(d04de340,d04e02a9,1beef,de4b0000,de4b0800) at panic+0x63
> pool_get(d05b7cc0,0,0,de4a4b00,d06d3e14) at pool_get+0x315
> em_get_buf(1f,d4204800,0,d4280048) at em_get_buf+0x182
> em_process_receive_interrupts(d4204800,fffffffe,d01021b1,20,d06d3e74) at
> em_pro
> cess_receive_interrupts+0x23a
> em_intr(d4204800) at em_intr+0x93
> Xrecurse_legacy5() at Xrecurse_legacy5+0x86
> --- interrupt ---
> idle_loop(d065edc0,28,0,0,80000000) at idle_loop+0x21
> bpendtsleep(d05b22a0,4,d04f5931,0,0,ffffffff,d04afc2c,0) at bpendtsleep
> uvm_scheduler(d05b2298,3,0,d04afc2c,18000000) at uvm_scheduler+0x6b
> check_console(0,0,0,0,0) at check_console
> Debugger(d0570480,13,42731eec,de4b0800,d05b7cc0) at Debugger+0x4
> ddb> ps
> PID PPID PGRP UID S FLAGS WAIT COMMAND
> 26266 1954 26266 0 3 0x4086 ttyin bash
> 1954 1 1954 0 3 0x4086 pause csh
> 9500 1 9500 0 3 0x4086 ttyin getty
> 30573 1 30573 0 3 0x4086 ttyin getty
> 32736 1 32736 0 3 0x4086 ttyin getty
> 21591 1 21591 0 3 0x4086 ttyin getty
> 27582 1 27582 0 3 0x4086 ttyin getty
> 15353 1 15353 0 3 0x84 select cron
> 11943 1 11943 0 3 0x40184 select sendmail
> 7699 1 7699 0 3 0x84 select sshd
> 23277 1 23277 0 3 0x184 select inetd
> 27141 1 27141 0 3 0x84 poll ntpd
> 27849 1 10659 83 3 0x186 poll ntpd
> 31512 25239 25239 73 3 0x184 poll syslogd
> 25239 1 25239 0 3 0x84 netio syslogd
> 10 0 0 0 3 0x100204 crypto_wa crypto
> 9 0 0 0 3 0x100204 aiodoned aiodoned
> 8 0 0 0 3 0x100204 syncer update
> 7 0 0 0 3 0x100204 cleaner cleaner
> 6 0 0 0 3 0x100204 reaper reaper
> 5 0 0 0 3 0x100204 pgdaemon pagedaemon
> 4 0 0 0 3 0x100204 usbtsk usbtask
> 3 0 0 0 3 0x100204 usbevt usb0
> 2 0 0 0 3 0x100204 kmalloc kmthread
> 1 0 1 0 3 0x4084 wait init
> 0 -1 0 0 3 0x80204 scheduler swapper
> ddb>
>
> dmesg
> OpenBSD 3.7 (GENERIC) #6: Tue Apr 19 07:08:30 CEST 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.06 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
> FLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 4294365184 (4193716K)
> avail mem = 3528396800 (3445700K)
> using 4278 buffers containing 214822912 bytes (209788K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(25) BIOS, date 01/14/05, BIOS32 rev. 0 @
> 0xfd7a1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
> pcibios0: PCI BIOS has 11 Interrupt Routing table entries
> pcibios0: PCI Exclusive IRQs: 9 10 11 15
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5 SouthBridge"
> rev 0
> x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1800 0xcc800/0x4000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x33
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00
> pci1 at pchb1 bus 2
> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00
> pci2 at pchb2 bus 6
> em0 at pci2 dev 1 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
> 3, a
> ddress: 00:04:23:9e:e6:7e
> em1 at pci2 dev 1 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
> 5, a
> ddress: 00:04:23:9e:e6:7f
> em2 at pci2 dev 8 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
> 10, a
> ddress: 00:09:6b:89:b1:de
> em3 at pci2 dev 8 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
> 11, a
> ddress: 00:09:6b:89:b1:df
> vga1 at pci0 dev 5 function 0 "ATI Radeon VE QY" rev 0x00
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pchb3 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
> pci3 at pchb3 bus 1
> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8245B, 1.16> SCSI0 5/cdrom
> remova
> ble
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq
> 11, v
> ersion 1.0, legacy support
> ohci0: SMM does not respond, resetting
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
> pchb4 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x05
> pchb5 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x05
> pci4 at pchb5 bus 4
> cac0 at pci4 dev 4 function 0 "DEC Compaq SMART RAID 42xx" rev 0x01: irq 9
> Comp
> aq Smart Array 431
> scsibus1 at cac0: 1 targets
> sd0 at scsibus1 targ 0 lun 0: <Compaq, RAID1 volume #, > SCSI2 0/direct
> fixed
> sd0: 34707MB, 8711 cyl, 255 head, 32 sec, 512 bytes/sec, 71081760 sec
> total pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05
> pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05
> pci5 at pchb7 bus 8
> em4 at pci5 dev 2 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
> 3, a
> ddress: 00:04:23:9e:e6:6a
> em5 at pci5 dev 2 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
> 5, a
> ddress: 00:04:23:9e:e6:6b
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
> wsdisplay
> 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask fbc5 netmask ffed ttymask ffef
> pctr: user-level cycle counter enabled
> uhidev0 at uhub0 port 2 configuration 1 interface 0
> uhidev0: IBM PPC I/F, rev 1.10/0.01, addr 2, iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 2 configuration 1 interface 1
> uhidev1: IBM PPC I/F, rev 1.10/0.01, addr 2, iclass 3/0
> ums0 at uhidev1
> ums0: X report 0x0002 not supported
> uhidev2 at uhub0 port 2 configuration 1 interface 2
> uhidev2: IBM PPC I/F, rev 1.10/0.01, addr 2, iclass 3/0
> uhid0 at uhidev2: input=64, output=64, feature=0
> dkcsum: sd0 matched BIOS disk 80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
>
> [demime 1.01d removed an attachment of type application/pgp-signature]
[demime 1.01d removed an attachment of type application/pgp-signature]
