On Wed, Jun 03, 2026 at 12:59:32PM +0530, Moteen Shah via 
lists.yoctoproject.org wrote:
> Add a standalone initramfs-module-netsetup recipe that installs 83-netsetup,
> an initramfs-framework module that configures the network interface via DHCP
> before the NFS root mount. Needed when the Ethernet driver is a loadable
> module and the deferred probe chain requires time to settle after udev loads
> the modules. Add initramfs-module-netsetup to packagegroup-ti-core-initramfs
> to pull it into the initramfs image.

Thanks for re-doing the patch - it's much better now. Please see a couple of 
minor comments below.


> Signed-off-by: Moteen Shah <[email protected]>
> ---
>  .../initramfs-module-netsetup/83-netsetup     | 54 +++++++++++++++++++
>  .../initramfs-module-netsetup_1.0.bb          | 24 +++++++++
>  .../packagegroup-ti-core-initramfs.bb         |  1 +
>  3 files changed, 79 insertions(+)
>  create mode 100644 
> meta-ti-bsp/recipes-ti/initramfs/initramfs-module-netsetup/83-netsetup
>  create mode 100644 
> meta-ti-bsp/recipes-ti/initramfs/initramfs-module-netsetup_1.0.bb
> 
> diff --git 
> a/meta-ti-bsp/recipes-ti/initramfs/initramfs-module-netsetup/83-netsetup 
> b/meta-ti-bsp/recipes-ti/initramfs/initramfs-module-netsetup/83-netsetup
> new file mode 100644
> index 00000000..b71bc3b3
> --- /dev/null
> +++ b/meta-ti-bsp/recipes-ti/initramfs/initramfs-module-netsetup/83-netsetup
> @@ -0,0 +1,54 @@
> +#!/bin/sh
> +# Configure network via DHCP before NFS root mount. Polls for an Ethernet
> +# interface with sleep 1 per iteration to allow the Ethernet driver deferred
> +# probe chain to settle after udev loads the modules.
> +
> +netsetup_enabled() {
> +    [ "${bootparam_root}" = "/dev/nfs" ] || return 1
> +    return 0
> +}
> +
> +netsetup_run() {
> +    local iface timeout devtype
> +
> +    # Extract interface from ip= kernel param (format: 
> client:server:gw:mask:host:device:autoconf)
> +    iface=""
> +    case "${bootparam_ip}" in
> +        dhcp|on|any|"")
> +            ;;
> +        *)
> +            iface=$(echo "${bootparam_ip}" | cut -d: -f6)
> +            ;;
> +    esac
> +
> +    udevadm trigger --action=add --subsystem-match=net
> +    udevadm settle --timeout=10
> +
> +    # Poll up to 60 seconds for an Ethernet interface (ARPHRD_ETHER = type 
> 1).
> +    msg "netsetup: waiting for ethernet interface..."
> +    timeout=60
> +    while [ "${timeout}" -gt 0 ]; do
> +        if [ -n "${iface}" ] && [ -d "/sys/class/net/${iface}" ]; then
> +            break
> +        fi
> +        for dev in /sys/class/net/*; do
> +            [ -f "${dev}/type" ] || continue
> +            devtype=$(cat "${dev}/type")
> +            [ "${devtype}" = "1" ] || continue
> +            iface=$(basename "${dev}")
> +            break
> +        done
> +        [ -n "${iface}" ] && [ -d "/sys/class/net/${iface}" ] && break
> +        sleep 1
> +        timeout=$((timeout - 1))
> +    done
> +
> +    if [ -z "${iface}" ] || [ ! -d "/sys/class/net/${iface}" ]; then
> +        msg "netsetup: no ethernet interface found after 60s, skipping DHCP"
> +        return
> +    fi
> +
> +    msg "netsetup: configuring ${iface} via DHCP"
> +
> +    dhcpcd --waitip "${iface}"
> +}
> diff --git 
> a/meta-ti-bsp/recipes-ti/initramfs/initramfs-module-netsetup_1.0.bb 
> b/meta-ti-bsp/recipes-ti/initramfs/initramfs-module-netsetup_1.0.bb
> new file mode 100644
> index 00000000..a4565a25
> --- /dev/null
> +++ b/meta-ti-bsp/recipes-ti/initramfs/initramfs-module-netsetup_1.0.bb
> @@ -0,0 +1,24 @@
> +SUMMARY = "initramfs support for DHCP network configuration before NFS root 
> mount"
> +
> +LICENSE = "MIT"
> +LIC_FILES_CHKSUM = 
> "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
> +
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"

This is not needed for a standalone recipe. I know it is also in the luks-ftpm 
recipe I mentioned as an example - it just snuck in unnoticed and not very 
critical.


> +SRC_URI = "file://83-netsetup"
> +
> +S = "${UNPACKDIR}"
> +
> +do_install() {
> +    install -d ${D}/init.d
> +    install -m 0755 ${UNPACKDIR}/83-netsetup ${D}/init.d/83-netsetup
> +}
> +
> +FILES:${PN} = "/init.d/83-netsetup"
> +
> +RDEPENDS:${PN} = "\
> +    initramfs-framework-base \
> +    dhcpcd \
> +"
> +
> +PACKAGE_ARCH = "${MACHINE_ARCH}"

Unlike luks-ftpm, this component is not machine-specific AFAICS, so it should 
not be setting it's package arch to be machine-specific.


> diff --git 
> a/meta-ti-bsp/recipes-ti/initramfs/packagegroup-ti-core-initramfs.bb 
> b/meta-ti-bsp/recipes-ti/initramfs/packagegroup-ti-core-initramfs.bb
> index a9eff847..2e68366d 100644
> --- a/meta-ti-bsp/recipes-ti/initramfs/packagegroup-ti-core-initramfs.bb
> +++ b/meta-ti-bsp/recipes-ti/initramfs/packagegroup-ti-core-initramfs.bb
> @@ -19,6 +19,7 @@ RDEPENDS:${PN} += "\
>      base-files \
>      base-passwd \
>      initramfs-framework-base \
> +    initramfs-module-netsetup \
>      initramfs-module-udev \
>      initramfs-module-nfsrootfs \
>      nfs-utils-mount \
> -- 
> 2.34.1
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#19976): 
https://lists.yoctoproject.org/g/meta-ti/message/19976
Mute This Topic: https://lists.yoctoproject.org/mt/119625156/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub 
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to