On Mon, Feb 24, 2025 at 9:53 AM Jon Cormier via lists.yoctoproject.org <[email protected]> wrote:
> Ryan, I also had a question about the bitbake-setup configs. Is there some > documentation on this setup tool? Googling this is tricky since the name > is so generic. The other tools docs pop right up in google. > Nevermind, looks like the work is being done here: https://github.com/kanavin/bitbake > > On Fri, Feb 21, 2025 at 2:18 PM Jon Cormier <[email protected]> > wrote: > > > Ryan, I think you also need to touch TMPDIR in a few of the local.conf > > files > > > > > > On Fri, Feb 21, 2025 at 11:31 AM Ryan Eatmon via > > lists.yoctoproject.org <[email protected]> wrote: > > > > > > When the conversion to the new XML/XSLT system was done, the reference > > > to OEBASE was converted to TOPDIR. The value for OEBASE was > > > historically the directory above the bitbake run dir which is what > > > TOPDIR is set to. This made the downloads and sstate_cache directories > > > appear down a level of directory that was unintended. > > > > > > This change updates the values for DL_DIR and SSTATE_DIR to be relative > > > to TOPDIR but back in the same location they were originally meant to > be > > > in. > > > > > > Signed-off-by: Ryan Eatmon <[email protected]> > > > --- > > > v2: I ran a make clean and make and a lot more configs got updated with > > > the change. Clearly I need to rework the make system. > > > > > > bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json | 2 +- > > > .../arago-kirkstone-chromium-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-kirkstone-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-kirkstone-next-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-kirkstone-wip-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-master-chromium-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-master-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-master-next-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-master-selinux-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-master-wip-config/local.conf.sample | 4 ++-- > > > .../arago-scarthgap-chromium-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-scarthgap-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-scarthgap-next-config/local.conf.sample | 4 ++-- > > > .../arago-scarthgap-selinux-config/local.conf.sample | 4 ++-- > > > conf/templates/arago-scarthgap-wip-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.00.00.006-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.00.00.007-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.00.00.011-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.01.00.001-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.01.00.003-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.01.00.007-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.01.00.008-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.02.00.008-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.02.00.009-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.02.00.010-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-09.03.05-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-10.00.07-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-10.01.08-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-10.01.10-config/local.conf.sample | 4 ++-- > > > .../coresdk_coresdk-10.01.10-selinux-config/local.conf.sample | 4 ++-- > > > conf/templates/distroless-kirkstone-config/local.conf.sample | 4 ++-- > > > conf/templates/distroless-master-config/local.conf.sample | 4 ++-- > > > conf/templates/distroless-scarthgap-config/local.conf.sample | 4 ++-- > > > conf/templates/poky-kirkstone-config/local.conf.sample | 4 ++-- > > > conf/templates/poky-master-config/local.conf.sample | 4 ++-- > > > conf/templates/poky-master-wip-config/local.conf.sample | 4 ++-- > > > conf/templates/poky-scarthgap-config/local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > .../local.conf.sample | 4 ++-- > > > configs/arago-master-wip-config.txt | 2 +- > > > .../processor-sdk-scarthgap-10.01.10.04-config.yml | 1 + > > > .../processor-sdk-scarthgap-chromium-10.01.10.04-config.yml | 1 + > > > kas/templates/local-arago64-v2.conf.yml | 4 ++-- > > > kas/templates/local-arago64-v3.conf.yml | 4 ++-- > > > kas/templates/local-poky-v2.conf.yml | 4 ++-- > > > kas/templates/local-poky-v3.conf.yml | 4 ++-- > > > kas/templates/local-v2.conf.yml | 4 ++-- > > > kas/templates/local-v3.conf.yml | 4 ++-- > > > sample-files/local-arago64-v2.conf.sample | 4 ++-- > > > sample-files/local-arago64-v3.conf.sample | 4 ++-- > > > sample-files/local-poky-v2.conf.sample | 4 ++-- > > > sample-files/local-poky-v3.conf.sample | 4 ++-- > > > sample-files/local-v2.conf.sample | 4 ++-- > > > sample-files/local-v3.conf.sample | 4 ++-- > > > src/bin/convert.pl | 2 +- > > > src/templates/local-arago64-v2.conf.xml | 4 ++-- > > > src/templates/local-arago64-v3.conf.xml | 4 ++-- > > > src/templates/local-poky-v2.conf.xml | 4 ++-- > > > src/templates/local-poky-v3.conf.xml | 4 ++-- > > > src/templates/local-v2.conf.xml | 4 ++-- > > > src/templates/local-v3.conf.xml | 4 ++-- > > > 90 files changed, 175 insertions(+), 173 deletions(-) > > > > > > diff --git a/bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json > > b/bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json > > > index 1cc2962..8acd24a 100644 > > > --- a/bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json > > > +++ b/bitbake-setup/coresdk_coresdk-10.01.10-selinux-config.json > > > @@ -9,7 +9,7 @@ > > > "uri": " > > https://git.ti.com/git/arago-project/oe-layersetup.git"; > > > } > > > }, > > > - "rev": "wip" > > > + "rev": "master" > > > }, > > > "path": "oe-layersetup" > > > }, > > > diff --git > > a/conf/templates/arago-kirkstone-chromium-config/local.conf.sample > > b/conf/templates/arago-kirkstone-chromium-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/arago-kirkstone-chromium-config/local.conf.sample > > > +++ b/conf/templates/arago-kirkstone-chromium-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/arago-kirkstone-config/local.conf.sample > > b/conf/templates/arago-kirkstone-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/arago-kirkstone-config/local.conf.sample > > > +++ b/conf/templates/arago-kirkstone-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/arago-kirkstone-next-config/local.conf.sample > > b/conf/templates/arago-kirkstone-next-config/local.conf.sample > > > index cb76dd8..d97939a 100644 > > > --- a/conf/templates/arago-kirkstone-next-config/local.conf.sample > > > +++ b/conf/templates/arago-kirkstone-next-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > a/conf/templates/arago-kirkstone-wip-config/local.conf.sample > > b/conf/templates/arago-kirkstone-wip-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/arago-kirkstone-wip-config/local.conf.sample > > > +++ b/conf/templates/arago-kirkstone-wip-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/arago-master-chromium-config/local.conf.sample > > b/conf/templates/arago-master-chromium-config/local.conf.sample > > > index f2e9587..720ce11 100644 > > > --- a/conf/templates/arago-master-chromium-config/local.conf.sample > > > +++ b/conf/templates/arago-master-chromium-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/arago-master-config/local.conf.sample > > b/conf/templates/arago-master-config/local.conf.sample > > > index f2e9587..720ce11 100644 > > > --- a/conf/templates/arago-master-config/local.conf.sample > > > +++ b/conf/templates/arago-master-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/arago-master-next-config/local.conf.sample > > b/conf/templates/arago-master-next-config/local.conf.sample > > > index 6c32f4b..c1549ac 100644 > > > --- a/conf/templates/arago-master-next-config/local.conf.sample > > > +++ b/conf/templates/arago-master-next-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/arago-master-selinux-config/local.conf.sample > > b/conf/templates/arago-master-selinux-config/local.conf.sample > > > index 5cc19d4..dfb4873 100644 > > > --- a/conf/templates/arago-master-selinux-config/local.conf.sample > > > +++ b/conf/templates/arago-master-selinux-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/arago-master-wip-config/local.conf.sample > > b/conf/templates/arago-master-wip-config/local.conf.sample > > > index f2e9587..720ce11 100644 > > > --- a/conf/templates/arago-master-wip-config/local.conf.sample > > > +++ b/conf/templates/arago-master-wip-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/arago-scarthgap-chromium-config/local.conf.sample > > b/conf/templates/arago-scarthgap-chromium-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/arago-scarthgap-chromium-config/local.conf.sample > > > +++ b/conf/templates/arago-scarthgap-chromium-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/arago-scarthgap-config/local.conf.sample > > b/conf/templates/arago-scarthgap-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/arago-scarthgap-config/local.conf.sample > > > +++ b/conf/templates/arago-scarthgap-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/arago-scarthgap-next-config/local.conf.sample > > b/conf/templates/arago-scarthgap-next-config/local.conf.sample > > > index dbb184b..3ad6481 100644 > > > --- a/conf/templates/arago-scarthgap-next-config/local.conf.sample > > > +++ b/conf/templates/arago-scarthgap-next-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/arago-scarthgap-selinux-config/local.conf.sample > > b/conf/templates/arago-scarthgap-selinux-config/local.conf.sample > > > index 46869ad..c862657 100644 > > > --- a/conf/templates/arago-scarthgap-selinux-config/local.conf.sample > > > +++ b/conf/templates/arago-scarthgap-selinux-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > a/conf/templates/arago-scarthgap-wip-config/local.conf.sample > > b/conf/templates/arago-scarthgap-wip-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/arago-scarthgap-wip-config/local.conf.sample > > > +++ b/conf/templates/arago-scarthgap-wip-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.00.00.006-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.00.00.006-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.00.00.006-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.00.00.006-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.00.00.007-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.00.00.007-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.00.00.007-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.00.00.007-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.00.00.011-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.00.00.011-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.00.00.011-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.00.00.011-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.01.00.001-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.01.00.001-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.01.00.001-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.01.00.001-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.01.00.003-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.01.00.003-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.01.00.003-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.01.00.003-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.01.00.007-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.01.00.007-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.01.00.007-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.01.00.007-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.01.00.008-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.01.00.008-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.01.00.008-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.01.00.008-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.02.00.008-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.02.00.008-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.02.00.008-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.02.00.008-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.02.00.009-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.02.00.009-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.02.00.009-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.02.00.009-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.02.00.010-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.02.00.010-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > a/conf/templates/coresdk_coresdk-09.02.00.010-config/local.conf.sample > > > +++ > > b/conf/templates/coresdk_coresdk-09.02.00.010-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-09.03.05-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-09.03.05-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/coresdk_coresdk-09.03.05-config/local.conf.sample > > > +++ b/conf/templates/coresdk_coresdk-09.03.05-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-10.00.07-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-10.00.07-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/coresdk_coresdk-10.00.07-config/local.conf.sample > > > +++ b/conf/templates/coresdk_coresdk-10.00.07-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-10.01.08-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-10.01.08-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/coresdk_coresdk-10.01.08-config/local.conf.sample > > > +++ b/conf/templates/coresdk_coresdk-10.01.08-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/coresdk_coresdk-10.01.10-config/local.conf.sample > > b/conf/templates/coresdk_coresdk-10.01.10-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/conf/templates/coresdk_coresdk-10.01.10-config/local.conf.sample > > > +++ b/conf/templates/coresdk_coresdk-10.01.10-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/coresdk_coresdk-10.01.10-selinux-config/local.conf.sample > > > b/conf/templates/coresdk_coresdk-10.01.10-selinux-config/local.conf.sample > > > index e45417c..27f1704 100644 > > > --- > > > a/conf/templates/coresdk_coresdk-10.01.10-selinux-config/local.conf.sample > > > +++ > > > b/conf/templates/coresdk_coresdk-10.01.10-selinux-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/distroless-kirkstone-config/local.conf.sample > > b/conf/templates/distroless-kirkstone-config/local.conf.sample > > > index 46cb253..b499977 100644 > > > --- a/conf/templates/distroless-kirkstone-config/local.conf.sample > > > +++ b/conf/templates/distroless-kirkstone-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/distroless-master-config/local.conf.sample > > b/conf/templates/distroless-master-config/local.conf.sample > > > index bcdaaa4..7d218e8 100644 > > > --- a/conf/templates/distroless-master-config/local.conf.sample > > > +++ b/conf/templates/distroless-master-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > a/conf/templates/distroless-scarthgap-config/local.conf.sample > > b/conf/templates/distroless-scarthgap-config/local.conf.sample > > > index 46cb253..b499977 100644 > > > --- a/conf/templates/distroless-scarthgap-config/local.conf.sample > > > +++ b/conf/templates/distroless-scarthgap-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/poky-kirkstone-config/local.conf.sample > > b/conf/templates/poky-kirkstone-config/local.conf.sample > > > index e67385d..12eacfc 100644 > > > --- a/conf/templates/poky-kirkstone-config/local.conf.sample > > > +++ b/conf/templates/poky-kirkstone-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/poky-master-config/local.conf.sample > > b/conf/templates/poky-master-config/local.conf.sample > > > index 1fe5688..e0112c7 100644 > > > --- a/conf/templates/poky-master-config/local.conf.sample > > > +++ b/conf/templates/poky-master-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/poky-master-wip-config/local.conf.sample > > b/conf/templates/poky-master-wip-config/local.conf.sample > > > index 1fe5688..e0112c7 100644 > > > --- a/conf/templates/poky-master-wip-config/local.conf.sample > > > +++ b/conf/templates/poky-master-wip-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/conf/templates/poky-scarthgap-config/local.conf.sample > > b/conf/templates/poky-scarthgap-config/local.conf.sample > > > index e67385d..12eacfc 100644 > > > --- a/conf/templates/poky-scarthgap-config/local.conf.sample > > > +++ b/conf/templates/poky-scarthgap-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.00-config/local.conf.sample > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.00-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.00-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.00-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.01-config/local.conf.sample > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.01-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.01-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.00.01-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.01.00-config/local.conf.sample > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.01.00-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.01.00-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.01.00-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.02.00-config/local.conf.sample > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.02.00-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.02.00-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-09.02.00-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.00.00-config/local.conf.sample > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.00.00-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.00.00-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.00.00-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.01.00-config/local.conf.sample > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.01.00-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.01.00-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-analytics_processor-sdk-analytics-10.01.00-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-gateway-10_00/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-gateway-10_00/local.conf.sample > > > index 6b91881..1149e85 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-gateway-10_00/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-gateway-10_00/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_06/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_06/local.conf.sample > > > index e4f04f3..a0d9b30 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_06/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_06/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_07/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_07/local.conf.sample > > > index 32a6cfb..9dd0dfa 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_07/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_00_00_07/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_06/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_06/local.conf.sample > > > index ee23c20..a83b490 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_06/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_06/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_07/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_07/local.conf.sample > > > index c29b416..e743654 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_07/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_01_00_07/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_04/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_04/local.conf.sample > > > index 34afc91..8096a3b 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_04/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_04/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_05/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_05/local.conf.sample > > > index f592ad9..31bfec8 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_05/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-09_02_00_05/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_07_06/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_07_06/local.conf.sample > > > index 0df5360..145aed2 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_07_06/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_07_06/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_08_06/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_08_06/local.conf.sample > > > index 5e39ec4..016f942 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_08_06/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_00_08_06/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_01_08_01/local.conf.sample > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_01_08_01/local.conf.sample > > > index 689e5d8..e627f36 100644 > > > --- > > > a/conf/templates/processor-sdk-linux_processor-sdk-linux-10_01_08_01/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk-linux_processor-sdk-linux-10_01_08_01/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-09.00.00-am62xxsip-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-09.00.00-am62xxsip-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-09.00.00-am62xxsip-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-09.00.00-am62xxsip-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-09.00.00-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-09.00.00-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-09.00.00-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-09.00.00-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-09.01.00-am65xx-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-09.01.00-am65xx-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-09.01.00-am65xx-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-09.01.00-am65xx-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-09.01.00-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-09.01.00-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-09.01.00-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-09.01.00-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-09.01.00-legacy-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-09.01.00-legacy-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-09.01.00-legacy-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-09.01.00-legacy-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-09.02.00.08-am64x-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-09.02.00.08-am64x-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-09.02.00.08-am64x-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-09.02.00.08-am64x-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-09.03.05.02-legacy-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-09.03.05.02-legacy-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-09.03.05.02-legacy-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-09.03.05.02-legacy-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.09-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.09-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.09-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.09-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.10-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.10-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.10-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-kirkstone-09.02.01.10-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.09-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.09-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.09-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.09-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.10-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.10-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.10-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-kirkstone-chromium-09.02.01.10-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.00.07.04-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.00.07.04-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.00.07.04-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.00.07.04-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.00.07.04-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.00.07.04-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.00.07.04-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.00.07.04-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git > > > a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample > > > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- > > > a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample > > > +++ > > > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/configs/arago-master-wip-config.txt > > b/configs/arago-master-wip-config.txt > > > index eb9c49d..165a3d1 100644 > > > --- a/configs/arago-master-wip-config.txt > > > +++ b/configs/arago-master-wip-config.txt > > > @@ -5,7 +5,7 @@ bitbake, > https://git.openembedded.org/bitbake,master,HEAD > > > meta-arago, > > > https://git.yoctoproject.org/meta-arago,master-wip,HEAD,layers=meta-arago-distro:meta-arago-extras:meta-arago-test > > > #meta-browser, > > > https://github.com/OSSystems/meta-browser.git,master,HEAD,layers=meta-chromium > > > #meta-selinux, > > https://git.yoctoproject.org/meta-selinux,master,HEAD,layers= > > > -meta-qt5,https://github.com/meta-qt5/meta-qt5.git,master,HEAD,layers= > > > +meta-qt6,https://code.qt.io/yocto/meta-qt6.git,dev,HEAD,layers= > > > meta-virtualization, > > https://git.yoctoproject.org/meta-virtualization,master,HEAD,layers= > > > meta-openembedded, > > > https://git.openembedded.org/meta-openembedded,master,HEAD,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia > > > meta-ti, > > > https://git.yoctoproject.org/meta-ti,master-wip,HEAD,layers=meta-ti-extras:meta-beagle:meta-ti-bsp > > > diff --git > > a/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml > > b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml > > > index 5ced779..2dc2f5c 100644 > > > --- a/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml > > > +++ b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml > > > @@ -71,3 +71,4 @@ repos: > > > commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765" > > > layers: > > > meta: > > > + > > > diff --git > > > a/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml > > > b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml > > > index 405fa3b..351d9ea 100644 > > > --- > > > a/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml > > > +++ > > > b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml > > > @@ -83,3 +83,4 @@ repos: > > > url: "https://git.ti.com/git/edgeai/meta-edgeai.git"; > > > branch: "scarthgap" > > > commit: "10.01.10.04" > > > + > > > diff --git a/kas/templates/local-arago64-v2.conf.yml > > b/kas/templates/local-arago64-v2.conf.yml > > > index c79388d..c6781be 100644 > > > --- a/kas/templates/local-arago64-v2.conf.yml > > > +++ b/kas/templates/local-arago64-v2.conf.yml > > > @@ -15,7 +15,7 @@ local_conf_header: > > > # wiping and rebuilding you can preserve this directory to speed > up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > - DL_DIR = "${TOPDIR}/downloads" > > > + DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -28,7 +28,7 @@ local_conf_header: > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state > > files where the > > > # state was still valid would be used (done using checksums). > > > - SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > + SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/kas/templates/local-arago64-v3.conf.yml > > b/kas/templates/local-arago64-v3.conf.yml > > > index b182483..3fa683e 100644 > > > --- a/kas/templates/local-arago64-v3.conf.yml > > > +++ b/kas/templates/local-arago64-v3.conf.yml > > > @@ -15,7 +15,7 @@ local_conf_header: > > > # wiping and rebuilding you can preserve this directory to speed > up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > - DL_DIR = "${TOPDIR}/downloads" > > > + DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -28,7 +28,7 @@ local_conf_header: > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state > > files where the > > > # state was still valid would be used (done using checksums). > > > - SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > + SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/kas/templates/local-poky-v2.conf.yml > > b/kas/templates/local-poky-v2.conf.yml > > > index 91995fe..075f535 100644 > > > --- a/kas/templates/local-poky-v2.conf.yml > > > +++ b/kas/templates/local-poky-v2.conf.yml > > > @@ -15,7 +15,7 @@ local_conf_header: > > > # wiping and rebuilding you can preserve this directory to speed > up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > - DL_DIR = "${TOPDIR}/downloads" > > > + DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -28,7 +28,7 @@ local_conf_header: > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state > > files where the > > > # state was still valid would be used (done using checksums). > > > - SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > + SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/kas/templates/local-poky-v3.conf.yml > > b/kas/templates/local-poky-v3.conf.yml > > > index 7368fb0..193a1ce 100644 > > > --- a/kas/templates/local-poky-v3.conf.yml > > > +++ b/kas/templates/local-poky-v3.conf.yml > > > @@ -15,7 +15,7 @@ local_conf_header: > > > # wiping and rebuilding you can preserve this directory to speed > up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > - DL_DIR = "${TOPDIR}/downloads" > > > + DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -28,7 +28,7 @@ local_conf_header: > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state > > files where the > > > # state was still valid would be used (done using checksums). > > > - SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > + SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/kas/templates/local-v2.conf.yml > > b/kas/templates/local-v2.conf.yml > > > index 3d666e4..f33fd45 100644 > > > --- a/kas/templates/local-v2.conf.yml > > > +++ b/kas/templates/local-v2.conf.yml > > > @@ -15,7 +15,7 @@ local_conf_header: > > > # wiping and rebuilding you can preserve this directory to speed > up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > - DL_DIR = "${TOPDIR}/downloads" > > > + DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -28,7 +28,7 @@ local_conf_header: > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state > > files where the > > > # state was still valid would be used (done using checksums). > > > - SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > + SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/kas/templates/local-v3.conf.yml > > b/kas/templates/local-v3.conf.yml > > > index 063b863..07eb5af 100644 > > > --- a/kas/templates/local-v3.conf.yml > > > +++ b/kas/templates/local-v3.conf.yml > > > @@ -15,7 +15,7 @@ local_conf_header: > > > # wiping and rebuilding you can preserve this directory to speed > up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > - DL_DIR = "${TOPDIR}/downloads" > > > + DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -28,7 +28,7 @@ local_conf_header: > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state > > files where the > > > # state was still valid would be used (done using checksums). > > > - SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > + SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/sample-files/local-arago64-v2.conf.sample > > b/sample-files/local-arago64-v2.conf.sample > > > index 7575b4b..8ad6f26 100644 > > > --- a/sample-files/local-arago64-v2.conf.sample > > > +++ b/sample-files/local-arago64-v2.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/sample-files/local-arago64-v3.conf.sample > > b/sample-files/local-arago64-v3.conf.sample > > > index f2e9587..720ce11 100644 > > > --- a/sample-files/local-arago64-v3.conf.sample > > > +++ b/sample-files/local-arago64-v3.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/sample-files/local-poky-v2.conf.sample > > b/sample-files/local-poky-v2.conf.sample > > > index e67385d..12eacfc 100644 > > > --- a/sample-files/local-poky-v2.conf.sample > > > +++ b/sample-files/local-poky-v2.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/sample-files/local-poky-v3.conf.sample > > b/sample-files/local-poky-v3.conf.sample > > > index 1fe5688..e0112c7 100644 > > > --- a/sample-files/local-poky-v3.conf.sample > > > +++ b/sample-files/local-poky-v3.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/sample-files/local-v2.conf.sample > > b/sample-files/local-v2.conf.sample > > > index 46cb253..b499977 100644 > > > --- a/sample-files/local-v2.conf.sample > > > +++ b/sample-files/local-v2.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/sample-files/local-v3.conf.sample > > b/sample-files/local-v3.conf.sample > > > index bcdaaa4..7d218e8 100644 > > > --- a/sample-files/local-v3.conf.sample > > > +++ b/sample-files/local-v3.conf.sample > > > @@ -10,7 +10,7 @@ CONF_VERSION = "2" > > > # wiping and rebuilding you can preserve this directory to speed up > > this part > > > # of subsequent builds. This directory is safe to share between > > multiple builds > > > # on the same machine too. > > > -DL_DIR = "${TOPDIR}/downloads" > > > +DL_DIR = "${TOPDIR}/../downloads" > > > > > > # > > > # Where to place shared-state files > > > @@ -23,7 +23,7 @@ DL_DIR = "${TOPDIR}/downloads" > > > # regenerate from these files if no changes were made to the > > configuration. > > > # If changes were made to the configuration, only shared state files > > where the > > > # state was still valid would be used (done using checksums). > > > -SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > > > +SSTATE_DIR = "${TOPDIR}/sstate-cache" > > > > > > # > > > # Shared-state files from other locations > > > diff --git a/src/bin/convert.pl b/src/bin/convert.pl > > > index 2787b86..42b9c2c 100755 > > > --- a/src/bin/convert.pl > > > +++ b/src/bin/convert.pl > > > @@ -501,7 +501,7 @@ sub convert_local_conf_template > > > { > > > chomp($lpLine); > > > > > > - $lpLine =~ s/OEBASE/TOPDIR/; > > > + $lpLine =~ s/OEBASE/TOPDIR\/\.\./; > > > $lpLine =~ s/^MACHINE/#MACHINE/; > > > > > > $lpLine =~ s/&/&/g; > > > diff --git a/src/templates/local-arago64-v2.conf.xml > > b/src/templates/local-arago64-v2.conf.xml > > > index b49f702..d9d2ae7 100644 > > > --- a/src/templates/local-arago64-v2.conf.xml > > > +++ b/src/templates/local-arago64-v2.conf.xml > > > @@ -11,7 +11,7 @@ > > > <line># wiping and rebuilding you can preserve this directory to > > speed up this part</line> > > > <line># of subsequent builds. This directory is safe to share > > between multiple builds</line> > > > <line># on the same machine too.</line> > > > - <line>DL_DIR = "${TOPDIR}/downloads"</line> > > > + <line>DL_DIR = "${TOPDIR}/../downloads"</line> > > > <line></line> > > > <line>#</line> > > > <line># Where to place shared-state files</line> > > > @@ -24,7 +24,7 @@ > > > <line># regenerate from these files if no changes were made to the > > configuration.</line> > > > <line># If changes were made to the configuration, only shared > > state files where the</line> > > > <line># state was still valid would be used (done using > > checksums).</line> > > > - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line> > > > + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line> > > > <line></line> > > > <line>#</line> > > > <line># Shared-state files from other locations</line> > > > diff --git a/src/templates/local-arago64-v3.conf.xml > > b/src/templates/local-arago64-v3.conf.xml > > > index 35d151f..c8a5d51 100644 > > > --- a/src/templates/local-arago64-v3.conf.xml > > > +++ b/src/templates/local-arago64-v3.conf.xml > > > @@ -11,7 +11,7 @@ > > > <line># wiping and rebuilding you can preserve this directory to > > speed up this part</line> > > > <line># of subsequent builds. This directory is safe to share > > between multiple builds</line> > > > <line># on the same machine too.</line> > > > - <line>DL_DIR = "${TOPDIR}/downloads"</line> > > > + <line>DL_DIR = "${TOPDIR}/../downloads"</line> > > > <line></line> > > > <line>#</line> > > > <line># Where to place shared-state files</line> > > > @@ -24,7 +24,7 @@ > > > <line># regenerate from these files if no changes were made to the > > configuration.</line> > > > <line># If changes were made to the configuration, only shared > > state files where the</line> > > > <line># state was still valid would be used (done using > > checksums).</line> > > > - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line> > > > + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line> > > > <line></line> > > > <line>#</line> > > > <line># Shared-state files from other locations</line> > > > diff --git a/src/templates/local-poky-v2.conf.xml > > b/src/templates/local-poky-v2.conf.xml > > > index 72160c9..b45d6c2 100644 > > > --- a/src/templates/local-poky-v2.conf.xml > > > +++ b/src/templates/local-poky-v2.conf.xml > > > @@ -11,7 +11,7 @@ > > > <line># wiping and rebuilding you can preserve this directory to > > speed up this part</line> > > > <line># of subsequent builds. This directory is safe to share > > between multiple builds</line> > > > <line># on the same machine too.</line> > > > - <line>DL_DIR = "${TOPDIR}/downloads"</line> > > > + <line>DL_DIR = "${TOPDIR}/../downloads"</line> > > > <line></line> > > > <line>#</line> > > > <line># Where to place shared-state files</line> > > > @@ -24,7 +24,7 @@ > > > <line># regenerate from these files if no changes were made to the > > configuration.</line> > > > <line># If changes were made to the configuration, only shared > > state files where the</line> > > > <line># state was still valid would be used (done using > > checksums).</line> > > > - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line> > > > + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line> > > > <line></line> > > > <line>#</line> > > > <line># Shared-state files from other locations</line> > > > diff --git a/src/templates/local-poky-v3.conf.xml > > b/src/templates/local-poky-v3.conf.xml > > > index 1e66478..fa313eb 100644 > > > --- a/src/templates/local-poky-v3.conf.xml > > > +++ b/src/templates/local-poky-v3.conf.xml > > > @@ -11,7 +11,7 @@ > > > <line># wiping and rebuilding you can preserve this directory to > > speed up this part</line> > > > <line># of subsequent builds. This directory is safe to share > > between multiple builds</line> > > > <line># on the same machine too.</line> > > > - <line>DL_DIR = "${TOPDIR}/downloads"</line> > > > + <line>DL_DIR = "${TOPDIR}/../downloads"</line> > > > <line></line> > > > <line>#</line> > > > <line># Where to place shared-state files</line> > > > @@ -24,7 +24,7 @@ > > > <line># regenerate from these files if no changes were made to the > > configuration.</line> > > > <line># If changes were made to the configuration, only shared > > state files where the</line> > > > <line># state was still valid would be used (done using > > checksums).</line> > > > - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line> > > > + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line> > > > <line></line> > > > <line>#</line> > > > <line># Shared-state files from other locations</line> > > > diff --git a/src/templates/local-v2.conf.xml > > b/src/templates/local-v2.conf.xml > > > index 40f30e7..49e060c 100644 > > > --- a/src/templates/local-v2.conf.xml > > > +++ b/src/templates/local-v2.conf.xml > > > @@ -11,7 +11,7 @@ > > > <line># wiping and rebuilding you can preserve this directory to > > speed up this part</line> > > > <line># of subsequent builds. This directory is safe to share > > between multiple builds</line> > > > <line># on the same machine too.</line> > > > - <line>DL_DIR = "${TOPDIR}/downloads"</line> > > > + <line>DL_DIR = "${TOPDIR}/../downloads"</line> > > > <line></line> > > > <line>#</line> > > > <line># Where to place shared-state files</line> > > > @@ -24,7 +24,7 @@ > > > <line># regenerate from these files if no changes were made to the > > configuration.</line> > > > <line># If changes were made to the configuration, only shared > > state files where the</line> > > > <line># state was still valid would be used (done using > > checksums).</line> > > > - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line> > > > + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line> > > > <line></line> > > > <line>#</line> > > > <line># Shared-state files from other locations</line> > > > diff --git a/src/templates/local-v3.conf.xml > > b/src/templates/local-v3.conf.xml > > > index d0c9d92..e300aaf 100644 > > > --- a/src/templates/local-v3.conf.xml > > > +++ b/src/templates/local-v3.conf.xml > > > @@ -11,7 +11,7 @@ > > > <line># wiping and rebuilding you can preserve this directory to > > speed up this part</line> > > > <line># of subsequent builds. This directory is safe to share > > between multiple builds</line> > > > <line># on the same machine too.</line> > > > - <line>DL_DIR = "${TOPDIR}/downloads"</line> > > > + <line>DL_DIR = "${TOPDIR}/../downloads"</line> > > > <line></line> > > > <line>#</line> > > > <line># Where to place shared-state files</line> > > > @@ -24,7 +24,7 @@ > > > <line># regenerate from these files if no changes were made to the > > configuration.</line> > > > <line># If changes were made to the configuration, only shared > > state files where the</line> > > > <line># state was still valid would be used (done using > > checksums).</line> > > > - <line>SSTATE_DIR = "${TOPDIR}/build/sstate-cache"</line> > > > + <line>SSTATE_DIR = "${TOPDIR}/sstate-cache"</line> > > > <line></line> > > > <line>#</line> > > > <line># Shared-state files from other locations</line> > > > -- > > > 2.17.1 > > > > > > > > > > > > > > > > > > > > > > > > -- > > Jonathan Cormier > > Senior Software Engineer > > > > Voice: 315.425.4045 x222 > > > > http://www.CriticalLink.com > > 6712 Brooklawn Parkway, Syracuse, NY 13211 > > > > > -- > Jonathan Cormier > Senior Software Engineer > > Voice: 315.425.4045 x222 > > http://www.CriticalLink.com <http://www.criticallink.com/> > 6712 Brooklawn Parkway, Syracuse, NY 13211 > <https://twitter.com/Critical_Link> > > > > > > -- Jonathan Cormier Senior Software Engineer Voice: 315.425.4045 x222 http://www.CriticalLink.com <http://www.criticallink.com/> 6712 Brooklawn Parkway, Syracuse, NY 13211 <https://twitter.com/Critical_Link> -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#15904): https://lists.yoctoproject.org/g/meta-arago/message/15904 Mute This Topic: https://lists.yoctoproject.org/mt/111311276/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
