After build processor-sdk-scarthgap-chromium-10.01.10.04-config, I noticed the downloads directory has moved to the build/downloads folder, instead of being at the top of the build directory. Was this intentional? I suspect it probably happened when everything was converted to xml configs. But the commit doesn't mention that as a known side effect.
commit aea8e0f53cb05e2d80056b3568f3376741c90853 Author: Ryan Eatmon <[email protected]> Date: Thu Oct 10 11:43:57 2024 -0500 Initial conversion of new XML configs ... -DL_DIR = "${OEBASE}/downloads" +DL_DIR = "${TOPDIR}/downloads" ... -SSTATE_DIR = "${OEBASE}/build/sstate-cache" +SSTATE_DIR = "${TOPDIR}/build/sstate-cache" SSTATE_DIR was also updated and it still looks to be put in the same place as ever... On Thu, Dec 19, 2024 at 11:34 AM Chirag Shilwant via lists.yoctoproject.org <[email protected]> wrote: > - Add processor-sdk-scarthgap-10.01.10.04-config used for > building AM62SIP & AM64x. > > - Add processor-sdk-scarthgap-chromium-10.01.10.04-config > used for building AM62P, AM62x, AM62LP & Beagleplay. > > Signed-off-by: Chirag Shilwant <[email protected]> > --- > ...ssor-sdk-scarthgap-10.01.10.04-config.json | 136 ++++++++++++++ > ...scarthgap-chromium-10.01.10.04-config.json | 158 ++++++++++++++++ > .../bblayers.conf.sample | 32 ++++ > .../conf-notes.txt | 22 +++ > .../conf-summary.txt | 1 + > .../local.conf.sample | 175 ++++++++++++++++++ > .../bblayers.conf.sample | 34 ++++ > .../conf-notes.txt | 22 +++ > .../conf-summary.txt | 1 + > .../local.conf.sample | 175 ++++++++++++++++++ > ...essor-sdk-scarthgap-10.01.10.04-config.txt | 17 ++ > ...-scarthgap-chromium-10.01.10.04-config.txt | 19 ++ > ...essor-sdk-scarthgap-10.01.10.04-config.yml | 74 ++++++++ > ...-scarthgap-chromium-10.01.10.04-config.yml | 86 +++++++++ > ...essor-sdk-scarthgap-10.01.10.04-config.xml | 66 +++++++ > ...-scarthgap-chromium-10.01.10.04-config.xml | 74 ++++++++ > 16 files changed, 1092 insertions(+) > create mode 100644 > bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json > create mode 100644 > bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json > create mode 100644 > conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample > create mode 100644 > conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt > create mode 100644 > conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt > create mode 100644 > conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample > create mode 100644 > conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample > create mode 100644 > conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt > create mode 100644 > conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt > create mode 100644 > conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample > create mode 100644 > configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt > create mode 100644 > configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt > create mode 100644 > kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml > create mode 100644 > kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml > create mode 100644 > src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml > create mode 100644 > src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml > > diff --git > a/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json > b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json > new file mode 100644 > index 0000000..f70e760 > --- /dev/null > +++ > b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config.json > @@ -0,0 +1,136 @@ > +{ > + "version": "1.0", > + "description": "TI Processor SDK v10.01.10.04", > + "sources": { > + "oe-layersetup": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": " > https://git.ti.com/git/arago-project/oe-layersetup.git"; > + } > + }, > + "rev": "master" > + }, > + "path": "oe-layersetup" > + }, > + "bitbake": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.openembedded.org/bitbake"; > + } > + }, > + "rev": "2.8" > + }, > + "path": "bitbake" > + }, > + "meta-tisdk": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://github.com/TexasInstruments/meta-tisdk.git"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-tisdk" > + }, > + "meta-arago": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.yoctoproject.org/meta-arago"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-arago" > + }, > + "meta-qt5": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://github.com/meta-qt5/meta-qt5.git"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-qt5" > + }, > + "meta-virtualization": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.yoctoproject.org/meta-virtualization"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-virtualization" > + }, > + "meta-openembedded": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.openembedded.org/meta-openembedded"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-openembedded" > + }, > + "meta-ti": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.yoctoproject.org/meta-ti"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-ti" > + }, > + "meta-arm": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.yoctoproject.org/meta-arm"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-arm" > + }, > + "meta-clang": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://github.com/kraj/meta-clang"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-clang" > + }, > + "oe-core": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.openembedded.org/openembedded-core"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "oe-core" > + } > + }, > + "configuration": { > + "bitbake-setup": { > + "default": { > + "description": "Default build configuration", > + "template": > "oe-layersetup-processor-sdk_processor-sdk-scarthgap-10.01.10.04-config", > + "targets": [ "bitbake -k tisdk-default-image" ] > + } > + } > + } > +} > diff --git > a/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json > b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json > new file mode 100644 > index 0000000..fa0a0bd > --- /dev/null > +++ > b/bitbake-setup/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config.json > @@ -0,0 +1,158 @@ > +{ > + "version": "1.0", > + "description": "TI Processor SDK vchromium-10.01.10.04", > + "sources": { > + "oe-layersetup": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": " > https://git.ti.com/git/arago-project/oe-layersetup.git"; > + } > + }, > + "rev": "master" > + }, > + "path": "oe-layersetup" > + }, > + "bitbake": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.openembedded.org/bitbake"; > + } > + }, > + "rev": "2.8" > + }, > + "path": "bitbake" > + }, > + "meta-tisdk": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://github.com/TexasInstruments/meta-tisdk.git"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-tisdk" > + }, > + "meta-arago": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.yoctoproject.org/meta-arago"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-arago" > + }, > + "meta-browser": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://github.com/OSSystems/meta-browser.git"; > + } > + }, > + "rev": "master" > + }, > + "path": "meta-browser" > + }, > + "meta-qt5": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://github.com/meta-qt5/meta-qt5.git"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-qt5" > + }, > + "meta-virtualization": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.yoctoproject.org/meta-virtualization"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-virtualization" > + }, > + "meta-openembedded": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.openembedded.org/meta-openembedded"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-openembedded" > + }, > + "meta-ti": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.yoctoproject.org/meta-ti"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-ti" > + }, > + "meta-arm": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.yoctoproject.org/meta-arm"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-arm" > + }, > + "meta-clang": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://github.com/kraj/meta-clang"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-clang" > + }, > + "oe-core": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.openembedded.org/openembedded-core"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "oe-core" > + }, > + "meta-edgeai": { > + "git-remote": { > + "remotes": { > + "origin": { > + "uri": "https://git.ti.com/git/edgeai/meta-edgeai.git"; > + } > + }, > + "rev": "scarthgap" > + }, > + "path": "meta-edgeai" > + } > + }, > + "configuration": { > + "bitbake-setup": { > + "default": { > + "description": "Default build configuration", > + "template": > "oe-layersetup-processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config", > + "targets": [ "bitbake -k tisdk-default-image" ] > + } > + } > + } > +} > diff --git > a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample > new file mode 100644 > index 0000000..10bcf2d > --- /dev/null > +++ > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/bblayers.conf.sample > @@ -0,0 +1,32 @@ > +# This template file was created by taking the > oe-core/meta/conf/bblayers.conf > +# file and removing the BBLAYERS section at the end. > + > +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf > +# changes incompatibly > +LCONF_VERSION = "5" > + > +BBPATH = "${TOPDIR}" > +BBFILES ?= "" > + > +BBLAYERS ?= " \ > + ##OEROOT##/../meta-tisdk > + ##OEROOT##/../meta-arago/meta-arago-distro > + ##OEROOT##/../meta-arago/meta-arago-extras > + ##OEROOT##/../meta-arago/meta-arago-demos > + ##OEROOT##/../meta-arago/meta-arago-test > + ##OEROOT##/../meta-qt5 > + ##OEROOT##/../meta-virtualization > + ##OEROOT##/../meta-openembedded/meta-networking > + ##OEROOT##/../meta-openembedded/meta-python > + ##OEROOT##/../meta-openembedded/meta-oe > + ##OEROOT##/../meta-openembedded/meta-gnome > + ##OEROOT##/../meta-openembedded/meta-filesystems > + ##OEROOT##/../meta-openembedded/meta-multimedia > + ##OEROOT##/../meta-ti/meta-ti-extras > + ##OEROOT##/../meta-ti/meta-ti-bsp > + ##OEROOT##/../meta-arm/meta-arm > + ##OEROOT##/../meta-arm/meta-arm-toolchain > + ##OEROOT##/../meta-clang > + ##OEROOT##/../oe-core/meta > + ##OEROOT##/../oe-layersetup > +" > diff --git > a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt > new file mode 100644 > index 0000000..1880460 > --- /dev/null > +++ > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-notes.txt > @@ -0,0 +1,22 @@ > + > +### Shell environment set up for builds. ### > + > +You can now run 'bitbake <target>' > + > +If you have not set MACHINE in your local.conf you can run > +'MACHINE=xxxxx bitbake <target>' > + > +Common targets are: > + tisdk-default-image > + tisdk-base-image > + tisdk-bootstrap-base-image > + tisdk-bootstrap-image > + tisdk-thinlinux-image > + tisdk-tiny-image > + > +You can also run generated qemu images with a command like 'runqemu > qemux86-64'. > + > +Other commonly useful commands are: > + - 'devtool' and 'recipetool' handle common recipe tasks > + - 'bitbake-layers' handles common layer tasks > + - 'oe-pkgdata-util' handles common target package tasks > diff --git > a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt > new file mode 100644 > index 0000000..5e1739a > --- /dev/null > +++ > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/conf-summary.txt > @@ -0,0 +1 @@ > +TI Processor SDK v10.01.10.04 > diff --git > a/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample > new file mode 100644 > index 0000000..7575b4b > --- /dev/null > +++ > b/conf/templates/processor-sdk_processor-sdk-scarthgap-10.01.10.04-config/local.conf.sample > @@ -0,0 +1,175 @@ > +# CONF_VERSION is increased each time build/conf/ changes incompatibly > +CONF_VERSION = "2" > + > +# > +# Where to place downloads > +# > +# During a first build the system will download many different source code > +# tarballs from various upstream projects. This can take a while, > particularly > +# if your network connection is slow. These are all stored in DL_DIR. When > +# wiping and rebuilding you can preserve this directory to speed up this > part > +# of subsequent builds. This directory is safe to share between multiple > builds > +# on the same machine too. > +DL_DIR = "${TOPDIR}/downloads" > + > +# > +# Where to place shared-state files > +# > +# BitBake has the capability to accelerate builds based on previously > built > +# output. This is done using "shared state" files which can be thought of > as > +# cache objects and this option determines where those files are placed. > +# > +# You can wipe out TMPDIR leaving this directory intact and the build > would > +# regenerate from these files if no changes were made to the > configuration. > +# If changes were made to the configuration, only shared state files > where the > +# state was still valid would be used (done using checksums). > +SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > + > +# > +# Shared-state files from other locations > +# > +# As mentioned above, shared state files are prebuilt cache data objects > which > +# can be used to accelerate build time. This variable can be used to > configure > +# the system to search other mirror locations for these objects before it > +# builds the data itself. > +# > +# This can be a filesystem directory, or a remote url such as http or ftp. > +# These would contain the sstate-cache results from previous builds > (possibly > +# from other machines). This variable works like fetcher > MIRRORS/PREMIRRORS > +# and points to the cache locations to check for the shared objects. > +#SSTATE_MIRRORS ?= "\ > +#file://.* http://someserver.tld/share/sstate/ \n \ > +#file://.* file:///some/local/dir/sstate/" > + > +# > +# Where to place the build output > +# > +# This option specifies where the bulk of the building work should be > done and > +# where BitBake should place its temporary files and output. Keep in mind > that > +# this includes the extraction and compilation of many applications and > the toolchain > +# which can use Gigabytes of hard disk space. > +TMPDIR = "${TOPDIR}/arago-tmp" > + > +# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here to be > outside > +#DEPLOY_DIR = "${TOPDIR}/deploy" > + > +# > +# Machine Selection > +# > +# You need to select a specific machine to target the build with. There > are a selection > +# of emulated machines available which can boot and run in the QEMU > emulator: > +# > +#MACHINE ?= "arago" > + > +# > +# Package Management configuration > +# > +# This variable lists which packaging formats to enable. Multiple package > backends > +# can be enabled at once and the first item listed in the variable will > be used > +# to generate the root filesystems. > +# Options are: > +# - 'package_deb' for debian style deb files > +# - 'package_ipk' for ipk files are used by opkg (a debian style > embedded package manager) > +# - 'package_rpm' for rpm style packages > +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" > +# We default to ipk: > +PACKAGE_CLASSES ?= "package_ipk" > + > +# > +# SDK/ADT target architecture > +# > +# This variable specified the architecture to build SDK/ADT items for and > means > +# you can build the SDK packages for architectures other than the machine > you are > +# running the build on (i.e. building i686 packages on an x86_64 host._ > +# Supported values are i686 and x86_64 > +SDKMACHINE ?= "x86_64" > + > +# > +# Extra image configuration defaults > +# > +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to > the generated > +# images. Some of these options are added to certain image types > automatically. The > +# variable can contain the following options: > +# "dbg-pkgs" - add -dbg packages for all installed packages > +# (adds symbol information for debugging/profiling) > +# "dev-pkgs" - add -dev packages for all installed packages > +# (useful if you want to develop against libs in the > image) > +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) > +# "tools-debug" - add debugging tools (gdb, strace) > +# "tools-profile" - add profiling tools (oprofile, exmap, lttng > valgrind (x86 only)) > +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord > etc.) > +# "debug-tweaks" - make an image suitable for development > +# e.g. ssh root access has a blank password > +# There are other application targets that can be used here too, see > +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more > details. > +# We default to enabling the debugging tweaks. > +EXTRA_IMAGE_FEATURES = "debug-tweaks" > + > +# > +# Additional image features > +# > +# The following is a list of additional classes to use when building > images which > +# enable extra features. Some available options which can be included in > this variable > +# are: > +# - 'buildstats' collect build statistics > +# - 'image-swab' to perform host system intrusion detection > +# NOTE: mklibs also needs to be explicitly enabled for a given image, see > local.conf.extended > +USER_CLASSES ?= "buildstats" > + > +# By default disable interactive patch resolution (tasks will just fail > instead): > +PATCHRESOLVE = "noop" > + > +# By default the machine configuration file sets the IMAGE_FSTYPES. But > if you > +# would like to add additional file system types you can uncomment the > +# following line and add the additional IMAGE_FSTYPES you want created > +# as part of the build flow. Some common types are listed below and you > +# can remove the ones you do not want. > +# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz > tar.bz2 cpio" > + > +# > +# Parallelism Options > +# > +# These two options control how much parallelism BitBake should use. The > first > +# option determines how many tasks bitbake should run in parallel: > +# > +# BB_NUMBER_THREADS ?= "1" > +# > +# The second option controls how many processes make should run in > parallel when > +# running compile tasks: > +# > +# PARALLEL_MAKE ?= "-j 1" > +# > +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j > 4" would > +# be appropriate for example > +# > +# NOTE: By default, bitbake will choose the number of processeors on your > host > +# so you should not need to set this unless you are wanting to lower the > number > +# allowed. > +# > + > +DISTRO = "arago" > + > +# Set terminal types by default it expects gnome-terminal > +# but we chose xterm > +TERMCMD = "${XTERM_TERMCMD}" > +TERMCMDRUN = "${XTERM_TERMCMDRUN}" > + > +# Don't generate the mirror tarball for SCM repos, the snapshot is enough > +BB_GENERATE_MIRROR_TARBALLS = "0" > + > +# Uncomment this to remove work directory after packaging to save disk > space > +#INHERIT += "rm_work" > + > +# Keep one set of images by default > +RM_OLD_IMAGE = "1" > + > +# Enable local PR service for binary feeds > +PRSERV_HOST = "localhost:0" > + > +# Enable hash equiv server > +BB_SIGNATURE_HANDLER = "OEEquivHash" > +BB_HASHSERVE = "auto" > + > +# It is recommended to activate "buildhistory" for testing the PR service > +INHERIT += "buildhistory" > +BUILDHISTORY_COMMIT = "1" > diff --git > a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample > new file mode 100644 > index 0000000..55a10df > --- /dev/null > +++ > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/bblayers.conf.sample > @@ -0,0 +1,34 @@ > +# This template file was created by taking the > oe-core/meta/conf/bblayers.conf > +# file and removing the BBLAYERS section at the end. > + > +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf > +# changes incompatibly > +LCONF_VERSION = "5" > + > +BBPATH = "${TOPDIR}" > +BBFILES ?= "" > + > +BBLAYERS ?= " \ > + ##OEROOT##/../meta-tisdk > + ##OEROOT##/../meta-arago/meta-arago-distro > + ##OEROOT##/../meta-arago/meta-arago-extras > + ##OEROOT##/../meta-arago/meta-arago-demos > + ##OEROOT##/../meta-arago/meta-arago-test > + ##OEROOT##/../meta-browser/meta-chromium > + ##OEROOT##/../meta-qt5 > + ##OEROOT##/../meta-virtualization > + ##OEROOT##/../meta-openembedded/meta-networking > + ##OEROOT##/../meta-openembedded/meta-python > + ##OEROOT##/../meta-openembedded/meta-oe > + ##OEROOT##/../meta-openembedded/meta-gnome > + ##OEROOT##/../meta-openembedded/meta-filesystems > + ##OEROOT##/../meta-openembedded/meta-multimedia > + ##OEROOT##/../meta-ti/meta-ti-extras > + ##OEROOT##/../meta-ti/meta-ti-bsp > + ##OEROOT##/../meta-arm/meta-arm > + ##OEROOT##/../meta-arm/meta-arm-toolchain > + ##OEROOT##/../meta-clang > + ##OEROOT##/../oe-core/meta > + ##OEROOT##/../meta-edgeai > + ##OEROOT##/../oe-layersetup > +" > diff --git > a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt > new file mode 100644 > index 0000000..1880460 > --- /dev/null > +++ > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-notes.txt > @@ -0,0 +1,22 @@ > + > +### Shell environment set up for builds. ### > + > +You can now run 'bitbake <target>' > + > +If you have not set MACHINE in your local.conf you can run > +'MACHINE=xxxxx bitbake <target>' > + > +Common targets are: > + tisdk-default-image > + tisdk-base-image > + tisdk-bootstrap-base-image > + tisdk-bootstrap-image > + tisdk-thinlinux-image > + tisdk-tiny-image > + > +You can also run generated qemu images with a command like 'runqemu > qemux86-64'. > + > +Other commonly useful commands are: > + - 'devtool' and 'recipetool' handle common recipe tasks > + - 'bitbake-layers' handles common layer tasks > + - 'oe-pkgdata-util' handles common target package tasks > diff --git > a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt > new file mode 100644 > index 0000000..18049f6 > --- /dev/null > +++ > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/conf-summary.txt > @@ -0,0 +1 @@ > +TI Processor SDK vchromium-10.01.10.04 > diff --git > a/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample > new file mode 100644 > index 0000000..7575b4b > --- /dev/null > +++ > b/conf/templates/processor-sdk_processor-sdk-scarthgap-chromium-10.01.10.04-config/local.conf.sample > @@ -0,0 +1,175 @@ > +# CONF_VERSION is increased each time build/conf/ changes incompatibly > +CONF_VERSION = "2" > + > +# > +# Where to place downloads > +# > +# During a first build the system will download many different source code > +# tarballs from various upstream projects. This can take a while, > particularly > +# if your network connection is slow. These are all stored in DL_DIR. When > +# wiping and rebuilding you can preserve this directory to speed up this > part > +# of subsequent builds. This directory is safe to share between multiple > builds > +# on the same machine too. > +DL_DIR = "${TOPDIR}/downloads" > + > +# > +# Where to place shared-state files > +# > +# BitBake has the capability to accelerate builds based on previously > built > +# output. This is done using "shared state" files which can be thought of > as > +# cache objects and this option determines where those files are placed. > +# > +# You can wipe out TMPDIR leaving this directory intact and the build > would > +# regenerate from these files if no changes were made to the > configuration. > +# If changes were made to the configuration, only shared state files > where the > +# state was still valid would be used (done using checksums). > +SSTATE_DIR = "${TOPDIR}/build/sstate-cache" > + > +# > +# Shared-state files from other locations > +# > +# As mentioned above, shared state files are prebuilt cache data objects > which > +# can be used to accelerate build time. This variable can be used to > configure > +# the system to search other mirror locations for these objects before it > +# builds the data itself. > +# > +# This can be a filesystem directory, or a remote url such as http or ftp. > +# These would contain the sstate-cache results from previous builds > (possibly > +# from other machines). This variable works like fetcher > MIRRORS/PREMIRRORS > +# and points to the cache locations to check for the shared objects. > +#SSTATE_MIRRORS ?= "\ > +#file://.* http://someserver.tld/share/sstate/ \n \ > +#file://.* file:///some/local/dir/sstate/" > + > +# > +# Where to place the build output > +# > +# This option specifies where the bulk of the building work should be > done and > +# where BitBake should place its temporary files and output. Keep in mind > that > +# this includes the extraction and compilation of many applications and > the toolchain > +# which can use Gigabytes of hard disk space. > +TMPDIR = "${TOPDIR}/arago-tmp" > + > +# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here to be > outside > +#DEPLOY_DIR = "${TOPDIR}/deploy" > + > +# > +# Machine Selection > +# > +# You need to select a specific machine to target the build with. There > are a selection > +# of emulated machines available which can boot and run in the QEMU > emulator: > +# > +#MACHINE ?= "arago" > + > +# > +# Package Management configuration > +# > +# This variable lists which packaging formats to enable. Multiple package > backends > +# can be enabled at once and the first item listed in the variable will > be used > +# to generate the root filesystems. > +# Options are: > +# - 'package_deb' for debian style deb files > +# - 'package_ipk' for ipk files are used by opkg (a debian style > embedded package manager) > +# - 'package_rpm' for rpm style packages > +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" > +# We default to ipk: > +PACKAGE_CLASSES ?= "package_ipk" > + > +# > +# SDK/ADT target architecture > +# > +# This variable specified the architecture to build SDK/ADT items for and > means > +# you can build the SDK packages for architectures other than the machine > you are > +# running the build on (i.e. building i686 packages on an x86_64 host._ > +# Supported values are i686 and x86_64 > +SDKMACHINE ?= "x86_64" > + > +# > +# Extra image configuration defaults > +# > +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to > the generated > +# images. Some of these options are added to certain image types > automatically. The > +# variable can contain the following options: > +# "dbg-pkgs" - add -dbg packages for all installed packages > +# (adds symbol information for debugging/profiling) > +# "dev-pkgs" - add -dev packages for all installed packages > +# (useful if you want to develop against libs in the > image) > +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) > +# "tools-debug" - add debugging tools (gdb, strace) > +# "tools-profile" - add profiling tools (oprofile, exmap, lttng > valgrind (x86 only)) > +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord > etc.) > +# "debug-tweaks" - make an image suitable for development > +# e.g. ssh root access has a blank password > +# There are other application targets that can be used here too, see > +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more > details. > +# We default to enabling the debugging tweaks. > +EXTRA_IMAGE_FEATURES = "debug-tweaks" > + > +# > +# Additional image features > +# > +# The following is a list of additional classes to use when building > images which > +# enable extra features. Some available options which can be included in > this variable > +# are: > +# - 'buildstats' collect build statistics > +# - 'image-swab' to perform host system intrusion detection > +# NOTE: mklibs also needs to be explicitly enabled for a given image, see > local.conf.extended > +USER_CLASSES ?= "buildstats" > + > +# By default disable interactive patch resolution (tasks will just fail > instead): > +PATCHRESOLVE = "noop" > + > +# By default the machine configuration file sets the IMAGE_FSTYPES. But > if you > +# would like to add additional file system types you can uncomment the > +# following line and add the additional IMAGE_FSTYPES you want created > +# as part of the build flow. Some common types are listed below and you > +# can remove the ones you do not want. > +# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz > tar.bz2 cpio" > + > +# > +# Parallelism Options > +# > +# These two options control how much parallelism BitBake should use. The > first > +# option determines how many tasks bitbake should run in parallel: > +# > +# BB_NUMBER_THREADS ?= "1" > +# > +# The second option controls how many processes make should run in > parallel when > +# running compile tasks: > +# > +# PARALLEL_MAKE ?= "-j 1" > +# > +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j > 4" would > +# be appropriate for example > +# > +# NOTE: By default, bitbake will choose the number of processeors on your > host > +# so you should not need to set this unless you are wanting to lower the > number > +# allowed. > +# > + > +DISTRO = "arago" > + > +# Set terminal types by default it expects gnome-terminal > +# but we chose xterm > +TERMCMD = "${XTERM_TERMCMD}" > +TERMCMDRUN = "${XTERM_TERMCMDRUN}" > + > +# Don't generate the mirror tarball for SCM repos, the snapshot is enough > +BB_GENERATE_MIRROR_TARBALLS = "0" > + > +# Uncomment this to remove work directory after packaging to save disk > space > +#INHERIT += "rm_work" > + > +# Keep one set of images by default > +RM_OLD_IMAGE = "1" > + > +# Enable local PR service for binary feeds > +PRSERV_HOST = "localhost:0" > + > +# Enable hash equiv server > +BB_SIGNATURE_HANDLER = "OEEquivHash" > +BB_HASHSERVE = "auto" > + > +# It is recommended to activate "buildhistory" for testing the PR service > +INHERIT += "buildhistory" > +BUILDHISTORY_COMMIT = "1" > diff --git > a/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt > b/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt > new file mode 100644 > index 0000000..b1281e5 > --- /dev/null > +++ b/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.txt > @@ -0,0 +1,17 @@ > +# This file takes repo entries in the format > +# repo name,repo uri,repo branch,repo > commit[,layers=layer1:layer2...:layern] > + > +bitbake, > https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf > > +meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers= > > +meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test > > +meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers= > > +meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers= > > +meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia > > +meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp > > +meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain > > +meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers= > > +oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta > <https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf+meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=+meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test+meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=+meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=+meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia+meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp+meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain+meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=+oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta> > + > +OECORELAYERCONF=./sample-files/bblayers.conf.sample > +OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample > +BITBAKE_INCLUSIVE_VARS=yes > diff --git > a/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt > b/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt > new file mode 100644 > index 0000000..5372ca8 > --- /dev/null > +++ > b/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.txt > @@ -0,0 +1,19 @@ > +# This file takes repo entries in the format > +# repo name,repo uri,repo branch,repo > commit[,layers=layer1:layer2...:layern] > + > +bitbake, > https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf > > +meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers= > > +meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test > > +meta-browser,https://github.com/OSSystems/meta-browser.git,master,1ed2254d72a4c25879014c98be287a7e3e22904c,layers=meta-chromium > > +meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers= > > +meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers= > > +meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia > > +meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp > > +meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain > > +meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers= > > +oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta > > +meta-edgeai,https://git.ti.com/git/edgeai/meta-edgeai.git,scarthgap,10.01.10.04,layers= > <https://git.openembedded.org/bitbake,2.8,6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf+meta-tisdk,https://github.com/TexasInstruments/meta-tisdk.git,scarthgap,10.01.10.04,layers=+meta-arago,https://git.yoctoproject.org/meta-arago,scarthgap,10.01.10,layers=meta-arago-distro:meta-arago-extras:meta-arago-demos:meta-arago-test+meta-browser,https://github.com/OSSystems/meta-browser.git,master,1ed2254d72a4c25879014c98be287a7e3e22904c,layers=meta-chromium+meta-qt5,https://github.com/meta-qt5/meta-qt5.git,scarthgap,eb828418264a49b8d00035cb3d7b12fcea3be801,layers=+meta-virtualization,https://git.yoctoproject.org/meta-virtualization,scarthgap,450941a1b6df96285691e8c23d4f332d3c88a994,layers=+meta-openembedded,https://git.openembedded.org/meta-openembedded,scarthgap,b8d1a14f7f3b76457c36752202ea7ae5881b6654,layers=meta-networking:meta-python:meta-oe:meta-gnome:meta-filesystems:meta-multimedia+meta-ti,https://git.yoctoproject.org/meta-ti,scarthgap,10.01.10,layers=meta-ti-extras:meta-ti-bsp+meta-arm,https://git.yoctoproject.org/meta-arm,scarthgap,7088279c0ab00c7dabefdd4544951b4746b48476,layers=meta-arm:meta-arm-toolchain+meta-clang,https://github.com/kraj/meta-clang,scarthgap,9fbfa9db33131abdf3870a94f00199eb53e276e5,layers=+oe-core,https://git.openembedded.org/openembedded-core,scarthgap,dac630ab5ee7aa6c5c7c294093adbd11b116c765,layers=meta+meta-edgeai,https://git.ti.com/git/edgeai/meta-edgeai.git,scarthgap,10.01.10.04,layers=> > + > +OECORELAYERCONF=./sample-files/bblayers.conf.sample > +OECORELOCALCONF=./sample-files/local-arago64-v2.conf.sample > +BITBAKE_INCLUSIVE_VARS=yes > diff --git > a/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml > b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml > new file mode 100644 > index 0000000..2dc2f5c > --- /dev/null > +++ b/kas/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.yml > @@ -0,0 +1,74 @@ > +header: > + version: 17 > + includes: > + - ../templates/bblayers.conf.yml > + - ../templates/local-arago64-v2.conf.yml > + > +target: tisdk-default-image > + > +repos: > + meta-tisdk: > + url: "https://github.com/TexasInstruments/meta-tisdk.git"; > + branch: "scarthgap" > + commit: "10.01.10.04" > + > + meta-arago: > + url: "https://git.yoctoproject.org/meta-arago"; > + branch: "scarthgap" > + commit: "10.01.10" > + layers: > + meta-arago-distro: > + meta-arago-extras: > + meta-arago-demos: > + meta-arago-test: > + > + meta-qt5: > + url: "https://github.com/meta-qt5/meta-qt5.git"; > + branch: "scarthgap" > + commit: "eb828418264a49b8d00035cb3d7b12fcea3be801" > + > + meta-virtualization: > + url: "https://git.yoctoproject.org/meta-virtualization"; > + branch: "scarthgap" > + commit: "450941a1b6df96285691e8c23d4f332d3c88a994" > + > + meta-openembedded: > + url: "https://git.openembedded.org/meta-openembedded"; > + branch: "scarthgap" > + commit: "b8d1a14f7f3b76457c36752202ea7ae5881b6654" > + layers: > + meta-networking: > + meta-python: > + meta-oe: > + meta-gnome: > + meta-filesystems: > + meta-multimedia: > + > + meta-ti: > + url: "https://git.yoctoproject.org/meta-ti"; > + branch: "scarthgap" > + commit: "10.01.10" > + layers: > + meta-ti-extras: > + meta-ti-bsp: > + > + meta-arm: > + url: "https://git.yoctoproject.org/meta-arm"; > + branch: "scarthgap" > + commit: "7088279c0ab00c7dabefdd4544951b4746b48476" > + layers: > + meta-arm: > + meta-arm-toolchain: > + > + meta-clang: > + url: "https://github.com/kraj/meta-clang"; > + branch: "scarthgap" > + commit: "9fbfa9db33131abdf3870a94f00199eb53e276e5" > + > + oe-core: > + url: "https://git.openembedded.org/openembedded-core"; > + branch: "scarthgap" > + commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765" > + layers: > + meta: > + > diff --git > a/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml > b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml > new file mode 100644 > index 0000000..351d9ea > --- /dev/null > +++ > b/kas/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.yml > @@ -0,0 +1,86 @@ > +header: > + version: 17 > + includes: > + - ../templates/bblayers.conf.yml > + - ../templates/local-arago64-v2.conf.yml > + > +target: tisdk-default-image > + > +repos: > + meta-tisdk: > + url: "https://github.com/TexasInstruments/meta-tisdk.git"; > + branch: "scarthgap" > + commit: "10.01.10.04" > + > + meta-arago: > + url: "https://git.yoctoproject.org/meta-arago"; > + branch: "scarthgap" > + commit: "10.01.10" > + layers: > + meta-arago-distro: > + meta-arago-extras: > + meta-arago-demos: > + meta-arago-test: > + > + meta-browser: > + url: "https://github.com/OSSystems/meta-browser.git"; > + branch: "master" > + commit: "1ed2254d72a4c25879014c98be287a7e3e22904c" > + layers: > + meta-chromium: > + > + meta-qt5: > + url: "https://github.com/meta-qt5/meta-qt5.git"; > + branch: "scarthgap" > + commit: "eb828418264a49b8d00035cb3d7b12fcea3be801" > + > + meta-virtualization: > + url: "https://git.yoctoproject.org/meta-virtualization"; > + branch: "scarthgap" > + commit: "450941a1b6df96285691e8c23d4f332d3c88a994" > + > + meta-openembedded: > + url: "https://git.openembedded.org/meta-openembedded"; > + branch: "scarthgap" > + commit: "b8d1a14f7f3b76457c36752202ea7ae5881b6654" > + layers: > + meta-networking: > + meta-python: > + meta-oe: > + meta-gnome: > + meta-filesystems: > + meta-multimedia: > + > + meta-ti: > + url: "https://git.yoctoproject.org/meta-ti"; > + branch: "scarthgap" > + commit: "10.01.10" > + layers: > + meta-ti-extras: > + meta-ti-bsp: > + > + meta-arm: > + url: "https://git.yoctoproject.org/meta-arm"; > + branch: "scarthgap" > + commit: "7088279c0ab00c7dabefdd4544951b4746b48476" > + layers: > + meta-arm: > + meta-arm-toolchain: > + > + meta-clang: > + url: "https://github.com/kraj/meta-clang"; > + branch: "scarthgap" > + commit: "9fbfa9db33131abdf3870a94f00199eb53e276e5" > + > + oe-core: > + url: "https://git.openembedded.org/openembedded-core"; > + branch: "scarthgap" > + commit: "dac630ab5ee7aa6c5c7c294093adbd11b116c765" > + layers: > + meta: > + > + meta-edgeai: > + url: "https://git.ti.com/git/edgeai/meta-edgeai.git"; > + branch: "scarthgap" > + commit: "10.01.10.04" > + > diff --git > a/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml > b/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml > new file mode 100644 > index 0000000..9ee86f2 > --- /dev/null > +++ > b/src/configs/processor-sdk/processor-sdk-scarthgap-10.01.10.04-config.xml > @@ -0,0 +1,66 @@ > +<?xml version='1.0'?> > +<config> > + <description>TI Processor SDK v10.01.10.04</description> > + > + <xi:include href='../../common/targets_arago.xml' xmlns:xi=' > http://www.w3.org/2001/XInclude'/> > + <xi:include href='../../templates/bblayers.conf.xml' xmlns:xi=' > http://www.w3.org/2001/XInclude'/> > + <xi:include href='../../templates/local-arago64-v2.conf.xml' > xmlns:xi='http://www.w3.org/2001/XInclude'/> > + > + <bitbake url='https://git.openembedded.org/bitbake' branch='2.8' > commit='6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf'/> > + > + <repos> > + <repo name='meta-tisdk' url=' > https://github.com/TexasInstruments/meta-tisdk.git' branch='scarthgap' > commit='10.01.10.04'> > + <layers/> > + </repo> > + <repo name='meta-arago' url=' > https://git.yoctoproject.org/meta-arago' branch='scarthgap' > commit='10.01.10'> > + <layers> > + <layer>meta-arago-distro</layer> > + <layer>meta-arago-extras</layer> > + <layer>meta-arago-demos</layer> > + <layer>meta-arago-test</layer> > + </layers> > + </repo> > + <repo name='meta-qt5' url=' > https://github.com/meta-qt5/meta-qt5.git' branch='scarthgap' > commit='eb828418264a49b8d00035cb3d7b12fcea3be801'> > + <layers/> > + </repo> > + <repo name='meta-virtualization' url=' > https://git.yoctoproject.org/meta-virtualization' branch='scarthgap' > commit='450941a1b6df96285691e8c23d4f332d3c88a994'> > + <layers/> > + </repo> > + <repo name='meta-openembedded' url=' > https://git.openembedded.org/meta-openembedded' branch='scarthgap' > commit='b8d1a14f7f3b76457c36752202ea7ae5881b6654'> > + <layers> > + <layer>meta-networking</layer> > + <layer>meta-python</layer> > + <layer>meta-oe</layer> > + <layer>meta-gnome</layer> > + <layer>meta-filesystems</layer> > + <layer>meta-multimedia</layer> > + </layers> > + </repo> > + <repo name='meta-ti' url='https://git.yoctoproject.org/meta-ti' > branch='scarthgap' commit='10.01.10'> > + <layers> > + <layer>meta-ti-extras</layer> > + <layer>meta-ti-bsp</layer> > + </layers> > + </repo> > + <repo name='meta-arm' url='https://git.yoctoproject.org/meta-arm' > branch='scarthgap' commit='7088279c0ab00c7dabefdd4544951b4746b48476'> > + <layers> > + <layer>meta-arm</layer> > + <layer>meta-arm-toolchain</layer> > + </layers> > + </repo> > + <repo name='meta-clang' url='https://github.com/kraj/meta-clang' > branch='scarthgap' commit='9fbfa9db33131abdf3870a94f00199eb53e276e5'> > + <layers/> > + </repo> > + <repo name='oe-core' url=' > https://git.openembedded.org/openembedded-core' branch='scarthgap' > commit='dac630ab5ee7aa6c5c7c294093adbd11b116c765'> > + <layers> > + <layer>meta</layer> > + </layers> > + </repo> > + </repos> > + > + <tools> > + <tool type='oe-layersetup'> > + <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/> > + </tool> > + </tools> > +</config> > diff --git > a/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml > b/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml > new file mode 100644 > index 0000000..5a9df9e > --- /dev/null > +++ > b/src/configs/processor-sdk/processor-sdk-scarthgap-chromium-10.01.10.04-config.xml > @@ -0,0 +1,74 @@ > +<?xml version='1.0'?> > +<config> > + <description>TI Processor SDK vchromium-10.01.10.04</description> > + > + <xi:include href='../../common/targets_arago.xml' xmlns:xi=' > http://www.w3.org/2001/XInclude'/> > + <xi:include href='../../templates/bblayers.conf.xml' xmlns:xi=' > http://www.w3.org/2001/XInclude'/> > + <xi:include href='../../templates/local-arago64-v2.conf.xml' > xmlns:xi='http://www.w3.org/2001/XInclude'/> > + > + <bitbake url='https://git.openembedded.org/bitbake' branch='2.8' > commit='6c2641f7a9e92c1b82e306f59ddd3c1249c52cbf'/> > + > + <repos> > + <repo name='meta-tisdk' url=' > https://github.com/TexasInstruments/meta-tisdk.git' branch='scarthgap' > commit='10.01.10.04'> > + <layers/> > + </repo> > + <repo name='meta-arago' url=' > https://git.yoctoproject.org/meta-arago' branch='scarthgap' > commit='10.01.10'> > + <layers> > + <layer>meta-arago-distro</layer> > + <layer>meta-arago-extras</layer> > + <layer>meta-arago-demos</layer> > + <layer>meta-arago-test</layer> > + </layers> > + </repo> > + <repo name='meta-browser' url=' > https://github.com/OSSystems/meta-browser.git' branch='master' > commit='1ed2254d72a4c25879014c98be287a7e3e22904c'> > + <layers> > + <layer>meta-chromium</layer> > + </layers> > + </repo> > + <repo name='meta-qt5' url=' > https://github.com/meta-qt5/meta-qt5.git' branch='scarthgap' > commit='eb828418264a49b8d00035cb3d7b12fcea3be801'> > + <layers/> > + </repo> > + <repo name='meta-virtualization' url=' > https://git.yoctoproject.org/meta-virtualization' branch='scarthgap' > commit='450941a1b6df96285691e8c23d4f332d3c88a994'> > + <layers/> > + </repo> > + <repo name='meta-openembedded' url=' > https://git.openembedded.org/meta-openembedded' branch='scarthgap' > commit='b8d1a14f7f3b76457c36752202ea7ae5881b6654'> > + <layers> > + <layer>meta-networking</layer> > + <layer>meta-python</layer> > + <layer>meta-oe</layer> > + <layer>meta-gnome</layer> > + <layer>meta-filesystems</layer> > + <layer>meta-multimedia</layer> > + </layers> > + </repo> > + <repo name='meta-ti' url='https://git.yoctoproject.org/meta-ti' > branch='scarthgap' commit='10.01.10'> > + <layers> > + <layer>meta-ti-extras</layer> > + <layer>meta-ti-bsp</layer> > + </layers> > + </repo> > + <repo name='meta-arm' url='https://git.yoctoproject.org/meta-arm' > branch='scarthgap' commit='7088279c0ab00c7dabefdd4544951b4746b48476'> > + <layers> > + <layer>meta-arm</layer> > + <layer>meta-arm-toolchain</layer> > + </layers> > + </repo> > + <repo name='meta-clang' url='https://github.com/kraj/meta-clang' > branch='scarthgap' commit='9fbfa9db33131abdf3870a94f00199eb53e276e5'> > + <layers/> > + </repo> > + <repo name='oe-core' url=' > https://git.openembedded.org/openembedded-core' branch='scarthgap' > commit='dac630ab5ee7aa6c5c7c294093adbd11b116c765'> > + <layers> > + <layer>meta</layer> > + </layers> > + </repo> > + <repo name='meta-edgeai' url=' > https://git.ti.com/git/edgeai/meta-edgeai.git' branch='scarthgap' > commit='10.01.10.04'> > + <layers/> > + </repo> > + </repos> > + > + <tools> > + <tool type='oe-layersetup'> > + <var name='BITBAKE_INCLUSIVE_VARS' value='yes'/> > + </tool> > + </tools> > +</config> > -- > 2.34.1 > > > > > > > -- Jonathan Cormier Senior Software Engineer Voice: 315.425.4045 x222 http://www.CriticalLink.com <http://www.criticallink.com/> 6712 Brooklawn Parkway, Syracuse, NY 13211 <https://twitter.com/Critical_Link> -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#15869): https://lists.yoctoproject.org/g/meta-arago/message/15869 Mute This Topic: https://lists.yoctoproject.org/mt/110200559/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
