I don't think the layer changes will have any impact on it. +Denys
-----Original Message----- From: Eatmon, Ryan <[email protected]> Sent: Monday, June 27, 2022 11:00 AM To: Humphreys, Jonathan <[email protected]>; [email protected] Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3 It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon. On 6/26/2022 15:18, Humphreys, Jonathan wrote: > Ryan, I do not see this patch applied to master. Can you check? > > Thanks > Jon > > -----Original Message----- > From: [email protected] > <[email protected]> On Behalf Of Jonathan Humphreys > via lists.yoctoproject.org > Sent: Monday, June 13, 2022 11:18 AM > To: [email protected] > Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: > remove uEnv.txt for k3 > > On Thu, Jun 9, 2022 at 10:05 AM, Andrew Davis wrote: > >> >> This fixup should have been done in u-boot and not in a uEnv.txt file. >> It is not correct for all K3 anymore either. Remove it. >> >> Signed-off-by: Andrew Davis <[email protected]> >> --- >> >> Changes from v1: >> - Subject s/tiusdk-uenv/tisdk-uenv >> >> .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- >> 1 file changed, 19 deletions(-) >> delete mode 100644 >> meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt >> >> diff --git >> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt >> b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt >> deleted file mode 100644 >> index 80ea34f5..00000000 >> --- >> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt >> +++ /dev/null >> @@ -1,19 +0,0 @@ >> -# This uEnv.txt file can contain additional environment settings >> that you -# want to set in U-Boot at boot time. This can be simple >> variables such -# as the serverip or custom variables. The format of this >> file is: >> -# variable=value >> -# NOTE: This file will be evaluated after the bootcmd is run and the >> -# bootcmd must be set to load this file if it exists (this is the >> -# default on all newer U-Boot images. This also means that some >> -# variables such as bootdelay cannot be changed by this file since >> -# it is not evaluated until the bootcmd is run. >> - > > Shouldn't we keep the above, as this is generic information about how to use > uEnv.txt and when it is invoked? > >> -# The specific board is not able to be automatically detected. The >> below is a -# workaround to set a sane default incase the user has >> not manually configured -# a specific board. >> -def_board_name="am65x" >> - >> -# Check if using default board_name when name_overlays is not set >> -check_for_board=if test $name_overlays; then echo "Using board_name >> = $board_name"; else setenv board_name $def_board_name; fi >> - >> -uenvcmd=run check_for_board; run findfdt >> -- >> 2.36.1 >> >> > > > > > -- Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#13917): https://lists.yoctoproject.org/g/meta-arago/message/13917 Mute This Topic: https://lists.yoctoproject.org/mt/91650730/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
