On Thu, May 7, 2015 at 5:27 PM, Jan Vesely <jan.ves...@rutgers.edu> wrote:
> On Thu, 2015-05-07 at 21:52 +0200, EdB wrote:
> > Le 2015-05-07 18:55, Aaron Watry a écrit :
> > > I'm not sure what the final consensus will be on how to do this, but
> > > FWIW:
> > > Tested-By: Aaron Watry <awa...@gmail.com>
> > >
> > > I've tested this with 4 combinations:
> > > no --with-opencl-icd option specified : libOpenCL.so gets installed in
> > > ${prefix}/lib
> > > --with-opencl-icd=no : libOpenCL.so gets installed in ${prefix}/lib
> > > --with-opencl-icd=standard : libMesaOpenCL.so installed in
> > > ${prefix}/lib, icd in /etc/OpenCL/vendors/mesa.icd
> > > --with-opencl-icd=sysconfdir : libMesaOpenCL.so installed in
> > > ${prefix}/lib, icd in ${prefix}/etc//mesa.icd. I only specified
> > > --prefix, no other directories overridden in configure command.
>
> shouldn't this part go to ${prefix}/etc/OpenCL/vendors?
> Is it just a typo or did it install to ${prefix}/etc//?
>
>
That was just a typo. It went to ${prefix}/etc/OpenCL/vendors/mesa.icd.
--Aaron
> jan
>
> > >
> >
> > thanks
> >
> > EdB
> >
> > > --Aaron
> > >
> > >
> > >
> > > On Wed, May 6, 2015 at 4:34 PM, EdB <edb+m...@sigluy.net> wrote:
> > >
> > >> The standard ICD file path is /etc/OpenCL/vendor/.
> > >> However it doesn't fit well with custom build.
> > >> This option allow ICD vendor file installation path override
> > >> ---
> > >> configure.ac [1] | 46
> > >> +++++++++++++++++++++++-----------
> > >> src/gallium/targets/opencl/Makefile.am | 2 +-
> > >> 2 files changed, 33 insertions(+), 15 deletions(-)
> > >>
> > >> diff --git a/configure.ac [1] b/configure.ac [1]
> > >> index 095e23e..90dba4e 100644
> > >> --- a/configure.ac [1]
> > >> +++ b/configure.ac [1]
> > >> @@ -804,12 +804,6 @@ AC_ARG_ENABLE([opencl],
> > >> [enable OpenCL library @<:@default=disabled@:>@])],
> > >> [enable_opencl="$enableval"],
> > >> [enable_opencl=no])
> > >> -AC_ARG_ENABLE([opencl_icd],
> > >> - [AS_HELP_STRING([--enable-opencl-icd],
> > >> - [Build an OpenCL ICD library to be loaded by an ICD
> > >> implementation
> > >> - @<:@default=disabled@:>@])],
> > >> - [enable_opencl_icd="$enableval"],
> > >> - [enable_opencl_icd=no])
> > >> AC_ARG_ENABLE([xlib-glx],
> > >> [AS_HELP_STRING([--enable-xlib-glx],
> > >> [make GLX library Xlib-based instead of DRI-based
> > >> @<:@default=disabled@:>@])],
> > >> @@ -1689,19 +1683,11 @@ if test "x$enable_opencl" = xyes; then
> > >> # XXX: Use $enable_shared_pipe_drivers once converted to
> > >> use static/shared pipe-drivers
> > >> enable_gallium_loader=yes
> > >>
> > >> - if test "x$enable_opencl_icd" = xyes; then
> > >> - OPENCL_LIBNAME="MesaOpenCL"
> > >> - else
> > >> - OPENCL_LIBNAME="OpenCL"
> > >> - fi
> > >> -
> > >> if test "x$have_libelf" != xyes; then
> > >> AC_MSG_ERROR([Clover requires libelf])
> > >> fi
> > >> fi
> > >> AM_CONDITIONAL(HAVE_CLOVER, test "x$enable_opencl" = xyes)
> > >> -AM_CONDITIONAL(HAVE_CLOVER_ICD, test "x$enable_opencl_icd" = xyes)
> > >> -AC_SUBST([OPENCL_LIBNAME])
> > >>
> > >> dnl
> > >> dnl Gallium configuration
> > >> @@ -2006,6 +1992,38 @@ AC_ARG_WITH([d3d-libdir],
> > >> [D3D_DRIVER_INSTALL_DIR="${libdir}/d3d"])
> > >> AC_SUBST([D3D_DRIVER_INSTALL_DIR])
> > >>
> > >> +dnl OpenCL ICD
> > >> +
> > >> +AC_ARG_WITH([opencl-icd],
> > >> +
> > >> [AS_HELP_STRING([--with-opencl-icd=@<:@no,standard,sysconfdir@:>@],
> > >> + [Build an OpenCL ICD library to be loaded by an ICD
> > >> implementation.
> > >> + If @<:@standard@:>@ the OpenCL ICD vendor file
> > >> installs in /etc/OpenCL/vendors.
> > >> + @<:@sysconfdir@:>@ installs the file in
> > >> $sysconfdir/OpenCL/vendors
> > >> + @<:@default=no@:>@])],
> > >> + [OPENCL_ICD="$withval"],
> > >> + [OPENCL_ICD="no"])
> > >> +
> > >> +case "x$OPENCL_ICD" in
> > >> +xno)
> > >> + OPENCL_LIBNAME="OpenCL"
> > >> + ;;
> > >> +xstandard)
> > >> + OPENCL_LIBNAME="MesaOpenCL"
> > >> + ICD_FILE_DIR="/etc/OpenCL/vendors"
> > >> + ;;
> > >> +xsysconfdir)
> > >> + OPENCL_LIBNAME="MesaOpenCL"
> > >> + ICD_FILE_DIR="$sysconfdir/OpenCL/vendors"
> > >> + ;;
> > >> +*)
> > >> + AC_MSG_ERROR(['$OPENCL_ICD' is not a valid option for
> > >> --with-opencl-icd])
> > >> + ;;
> > >> +esac
> > >> +
> > >> +AM_CONDITIONAL(HAVE_CLOVER_ICD, test "x$OPENCL_ICD" != xno)
> > >> +AC_SUBST([OPENCL_LIBNAME])
> > >> +AC_SUBST([ICD_FILE_DIR])
> > >> +
> > >> dnl
> > >> dnl Gallium helper functions
> > >> dnl
> > >> diff --git a/src/gallium/targets/opencl/Makefile.am
> > >> b/src/gallium/targets/opencl/Makefile.am
> > >> index 5daf327..781daa0 100644
> > >> --- a/src/gallium/targets/opencl/Makefile.am
> > >> +++ b/src/gallium/targets/opencl/Makefile.am
> > >> @@ -47,7 +47,7 @@ EXTRA_lib@OPENCL_LIBNAME@_la_DEPENDENCIES =
> > >> opencl.sym
> > >> EXTRA_DIST = mesa.icd opencl.sym
> > >>
> > >> if HAVE_CLOVER_ICD
> > >> -icddir = /etc/OpenCL/vendors/
> > >> +icddir = $(ICD_FILE_DIR)
> > >> icd_DATA = mesa.icd
> > >> endif
> > >>
> > >> --
> > >> 2.1.0
> > >>
> > >> _______________________________________________
> > >> mesa-dev mailing list
> > >> mesa-dev@lists.freedesktop.org
> > >> http://lists.freedesktop.org/mailman/listinfo/mesa-dev [2]
> > >
> > >
> > >
> > > Links:
> > > ------
> > > [1] http://configure.ac
> > > [2] http://lists.freedesktop.org/mailman/listinfo/mesa-dev
> > _______________________________________________
> > mesa-dev mailing list
> > mesa-dev@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/mesa-dev
>
> --
> Jan Vesely <jan.ves...@rutgers.edu>
>
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/mesa-dev
