Should I incorporate PIPE_SHADER_CAP_MAX_PREDS change in this patch or
send another with idea of dropping PIPE_SHADER_CAP_MAX_PREDS completly
from gallium, if there is no use?
David
On 02/06/2015 04:41 PM, Marek Olšák wrote:
This looks good with one exception: MAX_PREDS should be 0 for all
shader stages. It has never been supported and never will be. With
that done, this patch is:
Reviewed-by: Marek Olšák <marek.ol...@amd.com>
Marek
On Thu, Feb 5, 2015 at 11:56 PM, David Heidelberg <da...@ixit.cz> wrote:
Signed-off-by: David Heidelberg <da...@ixit.cz>
---
src/gallium/drivers/r300/r300_reg.h | 22 ++--------------------
src/gallium/drivers/r300/r300_screen.c | 4 +---
src/gallium/drivers/r300/r300_state.c | 1 -
3 files changed, 3 insertions(+), 24 deletions(-)
diff --git a/src/gallium/drivers/r300/r300_reg.h
b/src/gallium/drivers/r300/r300_reg.h
index 46aeba0..8a0728d 100644
--- a/src/gallium/drivers/r300/r300_reg.h
+++ b/src/gallium/drivers/r300/r300_reg.h
@@ -191,7 +191,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
# define R300_VAP_TCL_BYPASS (1 << 8)
/* Read only flag if TCL engine is busy. */
# define R300_VAP_PVS_BUSY (1 << 11)
-/* TODO: gap for MAX_MPS */
/* Read only flag if the vertex store is busy. */
# define R300_VAP_VS_BUSY (1 << 24)
/* Read only flag if the reciprocal engine is busy. */
@@ -921,9 +920,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* The line width is given in multiples of 6.
* In default mode lines are classified as vertical lines.
- * HO: horizontal
- * VE: vertical or horizontal
- * HO & VE: no classification
*/
#define R300_GA_LINE_CNTL 0x4234
# define R300_GA_LINE_CNTL_WIDTH_SHIFT 0
@@ -934,12 +930,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
# define R300_GA_LINE_CNTL_END_TYPE_COMP (3 << 16) /* Computed
(perpendicular to slope) */
# define R500_GA_LINE_CNTL_SORT_NO (0 << 18)
# define R500_GA_LINE_CNTL_SORT_MINX_MINY (1 << 18)
-/** TODO: looks wrong */
-# define R300_LINESIZE_MAX (R300_GA_LINE_CNTL_WIDTH_MASK /
6)
-/** TODO: looks wrong */
-# define R300_LINE_CNT_HO (1 << 16)
-/** TODO: looks wrong */
-# define R300_LINE_CNT_VE (1 << 17)
/* Line Stipple configuration information. */
#define R300_GA_LINE_STIPPLE_CONFIG 0x4238
@@ -1278,8 +1268,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
#define R300_RS_IP_1 0x4314
#define R300_RS_IP_2 0x4318
#define R300_RS_IP_3 0x431C
-# define R300_RS_INTERP_SRC_SHIFT 2 /* TODO: check for removal
*/
-# define R300_RS_INTERP_SRC_MASK (7 << 2) /* TODO: check for
removal */
# define R300_RS_TEX_PTR(x) (x << 0)
# define R300_RS_COL_PTR(x) ((x) << 6)
# define R300_RS_COL_FMT(x) ((x) << 9)
@@ -3300,7 +3288,7 @@ enum {
# define R500_INST_ALPHA_PRED_SEL_GGGG (3 << 25)
# define R500_INST_ALPHA_PRED_SEL_BBBB (4 << 25)
# define R500_INST_ALPHA_PRED_SEL_AAAA (5 << 25)
-/* XXX next four are kind of guessed */
+/* Next four are guessed, documentation doesn't mention order. */
# define R500_INST_STAT_WE_R (1 << 28)
# define R500_INST_STAT_WE_G (1 << 29)
# define R500_INST_STAT_WE_B (1 << 30)
@@ -3546,19 +3534,13 @@ enum {
/*
* CP type-3 packets
*/
-#define R300_CP_CMD_BITBLT_MULTI 0xC0009B00
-
-/* XXX Corbin's stuff from radeon and r200 */
-
#define RADEON_WAIT_UNTIL 0x1720
# define RADEON_WAIT_CRTC_PFLIP (1 << 0)
# define RADEON_WAIT_2D_IDLECLEAN (1 << 16)
# define RADEON_WAIT_3D_IDLECLEAN (1 << 17)
# define RADEON_WAIT_HOST_IDLECLEAN (1 << 18)
-#define R200_3D_DRAW_IMMD_2 0xC0003500
-
-#define RADEON_CP_PACKET0 0x0 /* XXX stolen from radeon_reg.h */
+#define RADEON_CP_PACKET0 0x00000000
#define RADEON_CP_PACKET3 0xC0000000
#define RADEON_ONE_REG_WR (1 << 15)
diff --git a/src/gallium/drivers/r300/r300_screen.c
b/src/gallium/drivers/r300/r300_screen.c
index 640d547..0a0ad16 100644
--- a/src/gallium/drivers/r300/r300_screen.c
+++ b/src/gallium/drivers/r300/r300_screen.c
@@ -321,7 +321,7 @@ static int r300_get_shader_param(struct pipe_screen
*pscreen, unsigned shader, e
case PIPE_SHADER_CAP_MAX_TEMPS:
return 32;
case PIPE_SHADER_CAP_MAX_PREDS:
- return is_r500 ? 4 : 0; /* XXX guessed. */
+ return is_r500 ? 4 : 0;
case PIPE_SHADER_CAP_INDIRECT_CONST_ADDR:
return 1;
case PIPE_SHADER_CAP_MAX_TEX_INSTRUCTIONS:
@@ -372,8 +372,6 @@ static float r300_get_paramf(struct pipe_screen* pscreen,
case PIPE_CAPF_GUARD_BAND_TOP:
case PIPE_CAPF_GUARD_BAND_RIGHT:
case PIPE_CAPF_GUARD_BAND_BOTTOM:
- /* XXX I don't know what these should be but the least we can do is
- * silence the potential error message */
return 0.0f;
default:
debug_printf("r300: Warning: Unknown CAP %d in get_paramf.\n",
diff --git a/src/gallium/drivers/r300/r300_state.c
b/src/gallium/drivers/r300/r300_state.c
index 6ce0329..e886df8 100644
--- a/src/gallium/drivers/r300/r300_state.c
+++ b/src/gallium/drivers/r300/r300_state.c
@@ -1156,7 +1156,6 @@ static void r300_delete_fs_state(struct pipe_context*
pipe, void* shader)
static void r300_set_polygon_stipple(struct pipe_context* pipe,
const struct pipe_poly_stipple* state)
{
- /* XXX no idea how to set this up, but not terribly important */
}
/* Create a new rasterizer state based on the CSO rasterizer state.
--
2.2.2
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/mesa-dev
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/mesa-dev
