Thanks. Roland, mind taking a look, IIRC you're the one who had the most objections last time around.
On Thu, Apr 24, 2014 at 5:44 PM, Marek Olšák <mar...@gmail.com> wrote: > Patch 1 & 2: > > Reviewed-by: Marek Olšák <marek.ol...@amd.com> > > Marek > > On Thu, Apr 24, 2014 at 3:56 AM, Ilia Mirkin <imir...@alum.mit.edu> wrote: >> This is my latest iteration of the ARB_sample_shading implementation. The >> only >> known defect is that gl_SampleMask doesn't appear to work on nv50 nor >> nvc0. I'm fairly sure it's due to some bit of setup I'm missing, but it has >> thus far eluded me. I believe I've addressed the various earlier review >> comments either with replies or by adjusting my code. Let me know if I've >> missed anything. >> >> I reinstated the cso_cache thing, I think it's needed since blits/etc >> probably >> should use min_samples == 1. I've used it in all the places I could find >> saved >> the sample mask. >> >> Both nv50 and nvc0 need to stick the sample positions into a constbuf. >> Perhaps >> it would make sense to make that manipulation more generic, but if there's HW >> that will pull the sample position of the current sample, then maybe not. >> >> I've left all these things as system values because (a) they're system values >> in mesa, and (b) it seems like a lot of trouble to expose the raster object >> as >> an addressable item in TGSI for seemingly little benefit. A lowering pass in >> the driver can just have it do the right thing. >> >> Assuming that the generic bits get positive reviews, I'd like to push the >> nv50/nvc0 bits as well despite the gl_SampleMask failure. That'll get >> resolved >> in time, and I doubt there are too many users of that feature. (Admittedly, >> probably not too many users of ARB_sample_shading in general.) >> >> [ Another little short-coming for nv50/nvc0 is that there is no shader >> variant >> support, and the code is different for per-sample vs per-fragment due to >> the >> interpolation instructions. There are a few other things that need variant >> support to work, perhaps that'll be done at a later time. ] >> >> Ilia Mirkin (4): >> gallium: add basic support for ARB_sample_shading >> mesa/st: add support for ARB_sample_shading >> nv50: add support for PIPE_CAP_SAMPLE_SHADING >> nvc0: add support for PIPE_CAP_SAMPLE_SHADING >> >> src/gallium/auxiliary/cso_cache/cso_context.c | 19 ++++++++++++ >> src/gallium/auxiliary/cso_cache/cso_context.h | 4 +++ >> src/gallium/auxiliary/hud/hud_context.c | 3 ++ >> src/gallium/auxiliary/postprocess/pp_run.c | 3 ++ >> src/gallium/auxiliary/tgsi/tgsi_strings.c | 5 ++- >> src/gallium/auxiliary/util/u_blit.c | 3 ++ >> src/gallium/docs/source/context.rst | 3 ++ >> src/gallium/docs/source/screen.rst | 3 ++ >> src/gallium/docs/source/tgsi.rst | 20 ++++++++++++ >> src/gallium/drivers/freedreno/freedreno_screen.c | 1 + >> src/gallium/drivers/i915/i915_screen.c | 1 + >> src/gallium/drivers/ilo/ilo_screen.c | 1 + >> src/gallium/drivers/llvmpipe/lp_screen.c | 1 + >> src/gallium/drivers/nouveau/codegen/nv50_ir.h | 8 +++++ >> .../drivers/nouveau/codegen/nv50_ir_driver.h | 3 +- >> .../drivers/nouveau/codegen/nv50_ir_emit_gk110.cpp | 13 ++++++++ >> .../drivers/nouveau/codegen/nv50_ir_emit_nvc0.cpp | 14 +++++++++ >> .../drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp | 10 +++++- >> .../nouveau/codegen/nv50_ir_lowering_nv50.cpp | 12 ++++++++ >> .../nouveau/codegen/nv50_ir_lowering_nvc0.cpp | 21 +++++++++++++ >> .../drivers/nouveau/codegen/nv50_ir_print.cpp | 2 ++ >> .../drivers/nouveau/codegen/nv50_ir_target.cpp | 6 ++-- >> .../nouveau/codegen/nv50_ir_target_nv50.cpp | 2 ++ >> .../nouveau/codegen/nv50_ir_target_nvc0.cpp | 2 ++ >> src/gallium/drivers/nouveau/nv30/nv30_screen.c | 1 + >> src/gallium/drivers/nouveau/nv50/nv50_context.h | 7 ++++- >> src/gallium/drivers/nouveau/nv50/nv50_program.c | 6 +++- >> src/gallium/drivers/nouveau/nv50/nv50_program.h | 2 ++ >> src/gallium/drivers/nouveau/nv50/nv50_screen.c | 1 + >> .../drivers/nouveau/nv50/nv50_shader_state.c | 13 ++++++++ >> src/gallium/drivers/nouveau/nv50/nv50_state.c | 12 ++++++++ >> .../drivers/nouveau/nv50/nv50_state_validate.c | 36 >> ++++++++++++++++++++-- >> src/gallium/drivers/nouveau/nv50/nv50_surface.c | 11 ++++++- >> src/gallium/drivers/nouveau/nvc0/nvc0_context.h | 2 ++ >> src/gallium/drivers/nouveau/nvc0/nvc0_program.c | 17 +++++++--- >> src/gallium/drivers/nouveau/nvc0/nvc0_program.h | 1 + >> src/gallium/drivers/nouveau/nvc0/nvc0_screen.c | 1 + >> .../drivers/nouveau/nvc0/nvc0_shader_state.c | 2 ++ >> src/gallium/drivers/nouveau/nvc0/nvc0_state.c | 12 ++++++++ >> .../drivers/nouveau/nvc0/nvc0_state_validate.c | 34 +++++++++++++++++--- >> src/gallium/drivers/nouveau/nvc0/nvc0_surface.c | 11 ++++++- >> src/gallium/drivers/r300/r300_screen.c | 1 + >> src/gallium/drivers/r600/r600_pipe.c | 1 + >> src/gallium/drivers/radeonsi/si_pipe.c | 1 + >> src/gallium/drivers/softpipe/sp_screen.c | 1 + >> src/gallium/drivers/svga/svga_screen.c | 1 + >> src/gallium/include/pipe/p_context.h | 3 ++ >> src/gallium/include/pipe/p_defines.h | 1 + >> src/gallium/include/pipe/p_shader_tokens.h | 5 ++- >> src/mesa/state_tracker/st_atom.c | 1 + >> src/mesa/state_tracker/st_atom.h | 1 + >> src/mesa/state_tracker/st_atom_msaa.c | 23 ++++++++++++++ >> src/mesa/state_tracker/st_cb_clear.c | 3 ++ >> src/mesa/state_tracker/st_extensions.c | 3 +- >> src/mesa/state_tracker/st_glsl_to_tgsi.cpp | 16 ++++++++-- >> src/mesa/state_tracker/st_program.c | 21 ++++++++----- >> 56 files changed, 378 insertions(+), 33 deletions(-) >> >> -- >> 1.8.3.2 >> >> _______________________________________________ >> mesa-dev mailing list >> mesa-dev@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/mesa-dev _______________________________________________ mesa-dev mailing list mesa-dev@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/mesa-dev