On 11/23/2017 06:45 PM, Ilia Mirkin wrote:
On Thu, Nov 23, 2017 at 12:35 PM, Marek Olšák <mar...@gmail.com> wrote:
Hi everybody,
Mario, feel free to push your patches if you haven't yet. (except the
workaround)
Hi,
just started 10 minutes ago with rebasing my current patchset against mesa
master. Will need some adjustments and retesting against i965.
I was also just "sort of done" with a mesa/gallium 10 bit version. I think
i'll submit rev 3 later today or tomorrow and maybe we'll need to sort this
out then, what goes where. I'll compare with Mareks branch...
The current state of my series for AMD here is that radeon-kms + ati-ddx
works nicely under exa (and with a slightly patched weston), but the ati-ddx
also needed some small patches which i have to send out. On amdgpu-kms i
know it works under my patched weston branch.
What is completely missing is glamor support, ergo support for at least
amdgpu-ddx and modesetting-ddx -- and xwayland.
For AMD, I applied Mario's patches (except Wayland - that didn't
apply) and added initial Gallium support:
https://cgit.freedesktop.org/~mareko/mesa/log/?h=10bit
What's the status of Glamor?
Do we have patches for xf86-video-amdgpu? The closed should have
10-bit support, meaning we should have DDX patches already somewhere,
right?
Somewhere there must be some, as the amdgpu-pro driver with the proprietary
libGL supported depth 30 at least in some version i tested earlier this
year?
I'd like to test this out with nouveau as well... do I understand
correctly that I shouldn't need anything special to check if it
basically works? i.e. I apply the patches, start Xorg in bpp=30 mode,
and then if glxgears works then I'm done? Is there a good way that I'm
really in 30bpp mode as far as all the software is concerned? (I don't
have a colorimeter or whatever fancy hw to *really* tell the
difference, although I do have a "deep color" TV.) If used with a
24bpp display, is the hw supposed to dither somehow?x
-ilia
nouveau is quite a bit work to do and not so clear how to proceed.
My current series does do proper xrgb2101010 / argb2101010 rendering under
gallium on both nv50 and nvc0 (Tested under GeForce 9600 for tesla, GTX 970
and 1050 for maxwell and pascal). I used PRIME render offload under both
DRI3/Present and Wayland/Weston with both intel and amd as display gpus, so
i know the drivers work together properly and nouveau-gallium renders
correctly.
The display side for native scanout on Nvidia is somewhat broken atm.:
1. Since Linux 4.10 with the switch of nouveau-kms to atomic modesetting,
using drmAddFB() with depth/bpp 30/32 maps to xrgb2101010 format, but
nouveau-kms doesn't support xrgb2101010, so setting Xorg to depth 30 will
end in a server-abort with modesetting failure. nouveau before Linux 4.10
mapped 30/32 to xbgr2101010 which seems to be supported since nv50. If i
boot with a < 4.10 kernel i get a picture at least on the old GeForce 9600
and GT330M.
If i hack nouveau-ddx to use a xrgb2101010 color channel mask (red in msb's,
blue in lsbs) instead of the correct xbgr2101010 mask, then i can get
nouveau-gallium to render 10 bits, but of course with swapped red and blue
channels. Switching dithering on via xrandr allows to get rendered 10 bit
images to get to a 8 bpc display, as confirmed via colorimeter. I hope a
deep color TV might work without dithering.
According to
https://github.com/envytools/envytools/blob/master/rnndb/display/nv_evo.xml
gpu's since kepler gk104 support xrgb2101010 scanout. With a hacked
nouveau-kms i can get the maxwell and pascal cards to accept xrgb2101010,
but the display is beyond weird. So far i couldn't make much sense of the
pixeltrash -- some of it remotely resembles a desktop, but something is
going wrong badly. Also the xbgr2101010 mode doesn't work correct. The same
is true for Wayland+Weston and even if i run Weston with pixman, keeping
Mesa out of the picture. So nouveau-kms needs some work for all modern
nvidia gpu's. Gamma table handling changed quite a bit, so maybe something
is wrong there.
2. We might also need some work for exa on nvc0+, but it's not clear what
problems are caused by kernel side, and what in exa.
3. In principle the clean solution for nouveau would be to upgrade the ddx
to drmAddFB2 ioctl, and use xbgr2101010 scanout to support everything back
to nv50+, but everything we have in X or Wayland is meant for xrgb2101010
not xbgr2101010. And we run into ambiguities of what, e.g., a depth 30
pixmap means in some extensions like glx_texture_form_pixmap. And the GLX
extension generally seems to have unresolved problems with ARGB formats
instead of ABGR formats, which is why Mesa doesn't expose ARGB by default --
only on Android atm.