On Thu, 2017-11-09 at 18:26 +0100, Roland Scheidegger wrote: > Am 09.11.2017 um 18:19 schrieb Jan Vesely: > > On Thu, 2017-11-09 at 03:58 +0100, srol...@vmware.com wrote: > > > From: Roland Scheidegger <srol...@vmware.com> > > > > > > I believe this is the safe thing to do, especially ever since the driver > > > actually generates NaNs for muls too. > > > Albeit since the radeon ISA docs are inaccurate/wrong there, I'm not > > > entirely sure what the non-dx10 versions do, > > > > non-dx10 version return nan if one of the operands is nan (tested on > > Turks). > > Yes, I've modified a piglit test and came to the same conclusion. (I > will put that up for review shortly.) > I don't know why you'd ever want that, though (ieee fmin/fmax also > should return non-nan).
opencl currently uses it to implement min/max since nans/infs inputs
are UB. dx10/ieee behaviour would also be OK, but maybe there's
difference in instruction latency?
Jan
>
> Roland
>
>
> >
> > Jan
> >
> > > but (as required by dx10)
> > > the dx10 versions should pick a non-nan source over a nan source.
> > > Other drivers presumably do the same (radeonsi, llvmpipe).
> > > This was shown to make some difference for bug 103544, albeit it is not
> > > required to fix it.
> > > ---
> > > src/gallium/drivers/r600/r600_shader.c | 12 ++++++------
> > > src/gallium/drivers/r600/sb/sb_expr.cpp | 2 ++
> > > 2 files changed, 8 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/src/gallium/drivers/r600/r600_shader.c
> > > b/src/gallium/drivers/r600/r600_shader.c
> > > index 188fbc9d47..6a755bb3fd 100644
> > > --- a/src/gallium/drivers/r600/r600_shader.c
> > > +++ b/src/gallium/drivers/r600/r600_shader.c
> > > @@ -8844,8 +8844,8 @@ static const struct r600_shader_tgsi_instruction
> > > r600_shader_tgsi_instruction[]
> > > [TGSI_OPCODE_DP3] = { ALU_OP2_DOT4_IEEE, tgsi_dp},
> > > [TGSI_OPCODE_DP4] = { ALU_OP2_DOT4_IEEE, tgsi_dp},
> > > [TGSI_OPCODE_DST] = { ALU_OP0_NOP, tgsi_opdst},
> > > - [TGSI_OPCODE_MIN] = { ALU_OP2_MIN, tgsi_op2},
> > > - [TGSI_OPCODE_MAX] = { ALU_OP2_MAX, tgsi_op2},
> > > + [TGSI_OPCODE_MIN] = { ALU_OP2_MIN_DX10, tgsi_op2},
> > > + [TGSI_OPCODE_MAX] = { ALU_OP2_MAX_DX10, tgsi_op2},
> > > [TGSI_OPCODE_SLT] = { ALU_OP2_SETGT, tgsi_op2_swap},
> > > [TGSI_OPCODE_SGE] = { ALU_OP2_SETGE, tgsi_op2},
> > > [TGSI_OPCODE_MAD] = { ALU_OP3_MULADD_IEEE, tgsi_op3},
> > > @@ -9042,8 +9042,8 @@ static const struct r600_shader_tgsi_instruction
> > > eg_shader_tgsi_instruction[] =
> > > [TGSI_OPCODE_DP3] = { ALU_OP2_DOT4_IEEE, tgsi_dp},
> > > [TGSI_OPCODE_DP4] = { ALU_OP2_DOT4_IEEE, tgsi_dp},
> > > [TGSI_OPCODE_DST] = { ALU_OP0_NOP, tgsi_opdst},
> > > - [TGSI_OPCODE_MIN] = { ALU_OP2_MIN, tgsi_op2},
> > > - [TGSI_OPCODE_MAX] = { ALU_OP2_MAX, tgsi_op2},
> > > + [TGSI_OPCODE_MIN] = { ALU_OP2_MIN_DX10, tgsi_op2},
> > > + [TGSI_OPCODE_MAX] = { ALU_OP2_MAX_DX10, tgsi_op2},
> > > [TGSI_OPCODE_SLT] = { ALU_OP2_SETGT, tgsi_op2_swap},
> > > [TGSI_OPCODE_SGE] = { ALU_OP2_SETGE, tgsi_op2},
> > > [TGSI_OPCODE_MAD] = { ALU_OP3_MULADD_IEEE, tgsi_op3},
> > > @@ -9265,8 +9265,8 @@ static const struct r600_shader_tgsi_instruction
> > > cm_shader_tgsi_instruction[] =
> > > [TGSI_OPCODE_DP3] = { ALU_OP2_DOT4_IEEE, tgsi_dp},
> > > [TGSI_OPCODE_DP4] = { ALU_OP2_DOT4_IEEE, tgsi_dp},
> > > [TGSI_OPCODE_DST] = { ALU_OP0_NOP, tgsi_opdst},
> > > - [TGSI_OPCODE_MIN] = { ALU_OP2_MIN, tgsi_op2},
> > > - [TGSI_OPCODE_MAX] = { ALU_OP2_MAX, tgsi_op2},
> > > + [TGSI_OPCODE_MIN] = { ALU_OP2_MIN_DX10, tgsi_op2},
> > > + [TGSI_OPCODE_MAX] = { ALU_OP2_MAX_DX10, tgsi_op2},
> > > [TGSI_OPCODE_SLT] = { ALU_OP2_SETGT, tgsi_op2_swap},
> > > [TGSI_OPCODE_SGE] = { ALU_OP2_SETGE, tgsi_op2},
> > > [TGSI_OPCODE_MAD] = { ALU_OP3_MULADD_IEEE, tgsi_op3},
> > > diff --git a/src/gallium/drivers/r600/sb/sb_expr.cpp
> > > b/src/gallium/drivers/r600/sb/sb_expr.cpp
> > > index 3dd3a4815b..7a5d62c8e8 100644
> > > --- a/src/gallium/drivers/r600/sb/sb_expr.cpp
> > > +++ b/src/gallium/drivers/r600/sb/sb_expr.cpp
> > > @@ -753,7 +753,9 @@ bool expr_handler::fold_alu_op2(alu_node& n) {
> > > n.bc.src[0].abs == n.bc.src[1].abs) {
> > > switch (n.bc.op) {
> > > case ALU_OP2_MIN: // (MIN x, x) => (MOV x)
> > > + case ALU_OP2_MIN_DX10:
> > > case ALU_OP2_MAX:
> > > + case ALU_OP2_MAX_DX10:
> > > convert_to_mov(n, v0, n.bc.src[0].neg,
> > > n.bc.src[0].abs);
> > > return fold_alu_op1(n);
> > > case ALU_OP2_ADD: // (ADD x, x) => (MUL x, 2)
>
> _______________________________________________
> mesa-dev mailing list
> mesa-dev@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/mesa-dev
signature.asc
Description: This is a digitally signed message part
_______________________________________________ mesa-dev mailing list mesa-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/mesa-dev
