The HALTI level is an indication of the gross architecture of the GPU.
It determines for significant part what feature level the GPU has, what
state (especially frontend state) is there, and where it is located.
Signed-off-by: Wladimir J. van der Laan <laa...@gmail.com>
---
src/gallium/drivers/etnaviv/etnaviv_internal.h | 2 ++
src/gallium/drivers/etnaviv/etnaviv_screen.c | 21 +++++++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/src/gallium/drivers/etnaviv/etnaviv_internal.h
b/src/gallium/drivers/etnaviv/etnaviv_internal.h
index 896bbf5..22264ec 100644
--- a/src/gallium/drivers/etnaviv/etnaviv_internal.h
+++ b/src/gallium/drivers/etnaviv/etnaviv_internal.h
@@ -60,6 +60,8 @@
/* GPU chip 3D specs */
struct etna_specs {
+ /* HALTI (gross architecture) level. -1 for pre-HALTI. */
+ int halti : 8;
/* supports SUPERTILE (64x64) tiling? */
unsigned can_supertile : 1;
/* needs z=(z+w)/2, for older GCxxx */
diff --git a/src/gallium/drivers/etnaviv/etnaviv_screen.c
b/src/gallium/drivers/etnaviv/etnaviv_screen.c
index 1fb8751..9e9c590 100644
--- a/src/gallium/drivers/etnaviv/etnaviv_screen.c
+++ b/src/gallium/drivers/etnaviv/etnaviv_screen.c
@@ -682,6 +682,27 @@ etna_get_specs(struct etna_screen *screen)
}
screen->specs.num_constants = val;
+ /* Figure out gross GPU architecture. See rnndb/common.xml for a specific
+ * description of the differences. */
+ if (VIV_FEATURE(screen, chipMinorFeatures5, HALTI5))
+ screen->specs.halti = 5; /* New GC7000/GC8x00 */
+ else if (VIV_FEATURE(screen, chipMinorFeatures5, HALTI4))
+ screen->specs.halti = 4; /* Old GC7000/GC7400 */
+ else if (VIV_FEATURE(screen, chipMinorFeatures5, HALTI3))
+ screen->specs.halti = 3; /* None? */
+ else if (VIV_FEATURE(screen, chipMinorFeatures4, HALTI2))
+ screen->specs.halti = 2; /* GC2500/GC3000/GC5000/GC6400 */
+ else if (VIV_FEATURE(screen, chipMinorFeatures2, HALTI1))
+ screen->specs.halti = 1; /* GC900/GC4000/GC7000UL */
+ else if (VIV_FEATURE(screen, chipMinorFeatures1, HALTI0))
+ screen->specs.halti = 0; /* GC880/GC2000/GC7000TM */
+ else
+ screen->specs.halti = -1; /* GC7000nanolite / pre-GC2000 except GC880 */
+ if (screen->specs.halti >= 0)
+ DBG("etnaviv: GPU arch: HALTI%d\n", screen->specs.halti);
+ else
+ DBG("etnaviv: GPU arch: pre-HALTI\n");
+
screen->specs.can_supertile =
VIV_FEATURE(screen, chipMinorFeatures0, SUPER_TILED);
screen->specs.bits_per_tile =
--
2.7.4
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/mesa-dev
