All messages should be posted in plain text. HTML will be converted to attachments. The meditech-l web site is MTUsers.com ======================================
This is just FYI - How to speed up your Micromedex load times. We are Magic 5.4 (below documentation states 5.5,but you can get it in 5.4) We use to have load times of Micromedex of about 6 - 8 hours. Then a "fix" was put in to speed up the load and something with RXM. Our load times went up to 40 hours - 48 hours! After way too much frustration and not getting anywhere, I called Micromedex. They pointed me to their website. (info below). I had done everything on the below documentation except 1 thing! - I was still using the old 3.x workstation I switched to the NUI 4.20b, my load times went from 40 hours to 1 hour 22 minutes I don't know why, but I've reproduced it multiple times. The NUI is many times faster for loading MDX FSV. Hope this helps someone avoid the same problems I had. Herb Bromenshenkel RPh/Clinical Analyst 1300 Anne Street NW Bemidji, MN 55601 Voice: 218-333-5527 Fax: 218-333-5889 [EMAIL PROTECTED] -------------From Micromedex web site * start *------------------- Answer: If you are running MEDITECH 5.5 or higher, you can optimize your load time by deploying DTS 7566 and DTS 7071. You must also upgrade to Workstation 4.20. Follow these steps. In TEST 5.5 or higher: 1. Have Meditech load DTS 7071 and DTS 7566. 2. Downloaded the new GUI workstation software version 4.20. 3. Manage and telnet the PC to directly connect to your Pharmacy machine. 4. Set the Negotiate Remote Read setting to "N" in the E/E Termservers, PCs, RemoteHosts routine. 5. Run the Micromedex load in one file set (A FULL FILE LIST). Note: If you experience problems, run the Micromedex load in three file sets. Please contact MEDITECH for more information. -------------From Micromedex web site * end *------------------- _______________________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
