Hello all. My Masq-Gate isn't working, I don't know why. Here's my setup: System: RedHat 5.2(glibc) using kernel 2.0.36. For testing, I'm using an 56K-PPP - dialout-Connection from my 'masq-gate to-be' to my ISP. The device is called ppp0. the 'eth0'-device in my masq-box gets it's IP per DHCP from an NT4.0-Server, but I figured this won't matter because the NT-Server is configured in such a way that it sends always the same IP-address to my masq-box. on the LAN, I use 192.168.2.x - addresses, where my masq-gate gets the 192.168.2.1 and the NT-box has the 192.168.2.200. "behind" the masq-gate is a small LAN with 3 WIN98 PC's and the mentioned NT-4.0 Server. The Setup of the windows-clients: (I'm not so sure about this one) DHCP for the own IP-address, 192.168.2.1 is the Gateway AND the DNS. I tried to be as close to David A. Ranches TrinityOS Doc as possible. I am at this point: I compiled the Kernel, including the ip-port forwarding patches. I created the rc.firewall - script. I enabled the logging-devices. At boot-time, the kernel can't find the module-dependencies of the modules I unselected when creating the kernel-config. The rc-firewall-script runs without errors, but I'm unable to see the outside world. What did I do wrong ? I probably wouldn't have postet a problem like this, but I'm getting a little desperate here because my boss put the clock on me. The masq-gate has to be up and running by friday. So anyone who might have an answer, please HELP ! --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For daily digest info, email [EMAIL PROTECTED]
