very well explain my friend and that I will do. Thank you for all the info and
I will do as you instructed. Thanks a buntch again and again.
proberbs 10:22 ¶The blessing of the LORD, it maketh rich, and he addeth no
sorrow with it.
----- Original Message -----
From: Christopher-Mark Gilland
To: macvisionaries@googlegroups.com
Sent: Saturday, August 25, 2012 11:58 PM
Subject: Re: protools and snow lepard
If you get the M Power 9 version of ProTools, no, you wouldn't be limited.
What I'm trying to say, I guess is, if you get the M-Power version of ProTools
which is version 9.0, you would only be able to use that version of PT with
M-Audio based hardware. So, in your case you'd be fine, since you have an
M-Audio interface, but! here's where the problem may pop up. Say that down the
road you want to get a different type interface, say a Tascam, or a
Sapphire Focus series or the like... you wouldn't be able then to use it with
ProTools MP9. MP9 only works with M-Audio based hardware. It's kind a like
back in the days when Digidesign was around, and at that time, they had
ProTools L E. That version only worked with Digidesign specific hardware, so
say you had a Digi03 interface... then you were fine, but if you ever got
something else, be it an interface, a control surface, or a combo of both that
wasn't Digidesign branded, you were screwed until you did a crossgrade to the
full fledged ProTools standard.
If you never see yourself ever getting anything aside M-Audio branded gear,
then MP9 may be the way to go, but just know: if you do that, then later change
your mind and decide that you want to upgrade to a different type interface or
control surface which isn't M-Audio branded, you're going to be out of luck
until you buy the crossgrade which is like $399, about the same amount as
Mpower 9. And really, ProTools 10 is $699, so you do the math... you get MP9
now, then later crossgrade, that's 399+399=$798, let's jsut call it $800. Now,
would you rather do that or pay $699 and be done with it, knowing up front that
no matter what, your DAW will work fine with any hardware and not be tied to
one specific brand for $99, just call it $100 less in the long run.
The better buy I'd say is get the bang for your buck! Yeah, at first it'll
hurt like a son of a gun, but if you have to, do what I personally did: go
through Sweetwater Sound out of Fort Wayne Indiana. Talk to Christopher
Geissler. That guy is absolutely incredible! Tell him Chris Gilland sent you,
he knows me really well, don't worry. The thing with that is, you could do 3
easy payments over 3 months. That definitely would probably make it a bit more
manageable, and what's nice is, after your first payment, you automatically
will get the product. You don't have to wait till the 3rd payment goes through
to get it. Now, if you screw up and miss a payment, that's kind a not my
problem at that point, LOL! And believe me, they'll hit you hard! $15.00 per?
day! late payment, but as long as the funds are there each 3 months, you're
fine and dandy.
Anyway, Christopher's direct number is:
1-800-222-4700
Ext. 1297.
I know he'd be honored! to work with you. He's jsut that type a guy. He's
awesome!
Anyway, being this is becoming more a ProTools discussion, than a mac
discussion, it might not be totally suitable for this list. I highly encourage
either you or anyone else on this list to write me privately off list if you
have any more questions about ProTools.
Eventually, once I get my equipment all patched in correctly where I can do
it and patch my Voiceover directly through the line, I'm gonna start offering
ProTools one on one Skype or telephone lessons for a very low cost through
PayPal.
Once I get that more in place, I'll be putting out more information about
that.
To keep up with the progress, you can follow me on Twitter. You need to
follow @clgproductions1
Anyway, my private e-mail address is:
ch...@clgproductions.com
Take care.
Chris.
----- Original Message -----
From: keith
To: macvisionaries@googlegroups.com
Sent: Saturday, August 25, 2012 11:15 PM
Subject: Re: protools and snow lepard
I do have a M-Audio audio enterface, but again you said I would be limited
even with that?
proberbs 10:22 ¶The blessing of the LORD, it maketh rich, and he addeth no
sorrow with it.
----- Original Message -----
From: Christopher-Mark Gilland
To: macvisionaries@googlegroups.com
Sent: Saturday, August 25, 2012 11:09 PM
Subject: Re: protools and snow lepard
Well, there is always the MPower version, but the problem with that is
you then have to have an audio interface which actually is M-Audio branded.
I wouldn't honestly recommend it. Though it's cheaper, you're gonna be
really limited as far as hardware is concerned.
Your better bet would be to get PT 10. If you wind up buying it, and
they give you 10.2, let me know and I'll see if I can dmg you my PT 10.0 DVD,
and before anyone bans me from this list, let me say, that is *NOT illegal!
You already can get the ProTools 10.2 disc from the Avid web site for free. If
he doesn't have an ILok, furthermore, if he doesn't have a Protools 10 license
on! that ILok, then regardless if I send him a DVD or not, he wouldn't be able
to do anything at all with it. It won't even run without an ILok license, so
yeah... it's not like I'd give my license out, all I'd be providing is the DVD
media itself. It would be like giving someone a Windows 7 disc but not giving
them any product key what so ever. Just the bare dvd only. I'm only doing
this as I don't think you even can get the 10.0 DVD anymore, and if he bies it,
I'm not sure if it would be 10.0 on the dvd, or whether they'd jump 'em
straight to 10.2, but my suspicion is the ladder lamentably.
One way're another Keith, if you by PT, let me know, and I'll get you up
and runnin.
Chris.
----- Original Message -----
From: keith
To: macvisionaries@googlegroups.com
Sent: Saturday, August 25, 2012 10:15 PM
Subject: Re: protools and snow lepard
oh almost forgot to ask, are there any other older versions that would
work other than 10?
proberbs 10:22 ¶The blessing of the LORD, it maketh rich, and he addeth
no sorrow with it.
----- Original Message -----
From: keith
To: macvisionaries@googlegroups.com
Sent: Saturday, August 25, 2012 10:14 PM
Subject: Re: protools and snow lepard
Thank you, I will see if i can buy 10. i'll check that out. I may
have other questions concerning PT that i'm sure you could answer for me later
on down the road if you wouldn't mind.
proberbs 10:22 ¶The blessing of the LORD, it maketh rich, and he
addeth no sorrow with it.
----- Original Message -----
From: Christopher-Mark Gilland
To: macvisionaries@googlegroups.com
Sent: Saturday, August 25, 2012 10:02 PM
Subject: Re: protools and snow lepard
I use 10.0, not 10.1 or 10.2, etc. but just plain 10.0 on
Snowleopard, and I find it works fantasticly.
Chris.
----- Original Message -----
From: keith
To: macvisionaries@googlegroups.com
Sent: Saturday, August 25, 2012 8:54 PM
Subject: protools and snow lepard
wich vursion of pro tools works with VoiceOver on Snow Lepard
proberbs 10:22 ¶The blessing of the LORD, it maketh rich, and he
addeth no sorrow with it.
--
You received this message because you are subscribed to the
Google Groups "MacVisionaries" group.
To post to this group, send email to
macvisionaries@googlegroups.com.
To unsubscribe from this group, send email to
macvisionaries+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
--
You received this message because you are subscribed to the Google
Groups "MacVisionaries" group.
To post to this group, send email to
macvisionaries@googlegroups.com.
To unsubscribe from this group, send email to
macvisionaries+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
--
You received this message because you are subscribed to the Google
Groups "MacVisionaries" group.
To post to this group, send email to macvisionaries@googlegroups.com.
To unsubscribe from this group, send email to
macvisionaries+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
--
You received this message because you are subscribed to the Google
Groups "MacVisionaries" group.
To post to this group, send email to macvisionaries@googlegroups.com.
To unsubscribe from this group, send email to
macvisionaries+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
--
You received this message because you are subscribed to the Google Groups
"MacVisionaries" group.
To post to this group, send email to macvisionaries@googlegroups.com.
To unsubscribe from this group, send email to
macvisionaries+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
--
You received this message because you are subscribed to the Google Groups
"MacVisionaries" group.
To post to this group, send email to macvisionaries@googlegroups.com.
To unsubscribe from this group, send email to
macvisionaries+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
--
You received this message because you are subscribed to the Google Groups
"MacVisionaries" group.
To post to this group, send email to macvisionaries@googlegroups.com.
To unsubscribe from this group, send email to
macvisionaries+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
--
You received this message because you are subscribed to the Google Groups
"MacVisionaries" group.
To post to this group, send email to macvisionaries@googlegroups.com.
To unsubscribe from this group, send email to
macvisionaries+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
