Good morning VaShaun, To install the latest version of the Reader, using a Mac, please do the following. 1. Please navigate with either Safari or Firefox to: http://www.knfbreader.com 2. Navigate to the "My Reader" link. 3. Navigate to the "new user" link 4. Fill out your information to create a user account and activate the "register" button once all of the required fields have been filled out. 5. Navigate to the "Software activation" link and enter your trial serial number in to the necessary field and press the "next" button to proceed. 6. Download the latest version of the knfbReader software, the English language pack, and the English documentation. All of the files should save to your Downloads folder in your home directory. 7. Power on your Nokia phone and press the menu key, navigate to applications, highlight the "Reader" application and press the clear/delete key located above the number 3. When a message appears asking you to confirm the removal of the application, please do so by pressing the left selection key. 8. Once the application has been removed from the device, please connect the device to your Mac using the provided USB cable. When the device has been connected, a message should appear on the phone screen asking you how you want to connect. Please navigate to the "Mass storage" item and press Ok. 9. At this point, you should see a new disc drive appear on your finder. Please navigate to your downloads folder and highlight all three of the files needed for installing the reader and press command C to copy the items to your clipboard. 10. Navigate to the mass storage device in your finder and open the disc. Press command V to paste the installation files on the phone. Once the files have finished transferring to the device, close the window and highlight the disc in the finder window and press command E to eject the device. Disconnect the phone from the computer. and navigate to applications/office/file manager.
for instructions on how to use the File Manager on your phone. Use the File Manager on your phone to open the file named knfbReader_v_6_4_0.sis or kReader_v_6_3_4.sis depending on the product you are installing. 11. After a short time, your phone will ask you if you want to install the Reader. Press the Left-Select key to say "yes" to this prompt, as well as the other prompts that will come up. If you only plan to install one language pack, you can install to the phone memory when prompted where to install (this is the default), but if you plan to install more than one language pack, you should change the selection to either "Mass Storage" or "Memory Card". Continue to press the Left-Select key to confirm the remaining prompt messages. Once the installation is complete, repeat the installation steps above with the language pack file that will be the user language, and again for the on-phone documentation pack. Make sure to install the language and documentation packs to the same location as the executable, either in the phone memory, mass storage or memory card, depending on your phone model. Repeat these steps again for each additional language pack you install, as well as the documentation pack file. 12. After installing the Mobile Reader and language pack or packs, you must activate the software. Turn the phone off, and then turn it back on so that the main screen appears with the time and date. If the bottom left of the phone screen says "Reader", Talks or Mobile Speak will say "Key 1 Reader", your phone has been pre-configured to launch the Reader with Left Selection key. If not, you can configure a shortcut yourself by using the phone's "Personalization" options; refer to the user manual for your phone model on our phone information page. The instructions below assume that the shortcut is set to the Left Selection key. Open the Reader application by pressing the Left-Select key while on the main screen and you will be presented with a message asking you to activate the software. If you do not have this shortcut, press the Menu key and navigate to the Applications folder. On the 6220 Classic, select the My Own folder within Applications. Navigate to the Reader icon and press the Select key to open it. 13. The Reader application will ask you to press the Left-Select key, in order to continue activation. Then, you can press the down button to hear the software code, and you can have it repeated as many times as you like by pressing the right directional button. Go back to the web browser on your computer with the page where you can download the Mobile Reader files (refer to steps 2,3 and 4). Select the "Next" button at the bottom of this page and then you will be prompted to enter a software code. Enter the software code from your Reader into the field on the web page and select the "Finish" button. 14. The web page will provide you with an Activation code which is a string of numbers. Enter this Activation code into your Reader using the numbers on the phone's keypad. When you have finished entering the Activation code, press the Left Select key. If you get a message stating that the activation code is invalid, you will be allowed to try entering it again. Otherwise, you will get a message that your Reader has been successfully activated, and that you can continue using the Reader. Press the Left Select key to dismiss this message and go to the Reader application's "Home" screen. Regards: Hai On Oct 1, 2010, at 3:37 AM, Thuy wrote: > Why not get a demo of a screenreader on the phone? Also, if you have a > card reader, copy the installation file onto it, and then go through > the file manager on the phone. Hope this helps. > > Cheers > > Thuy > > > On 01/10/2010, VaShaun Jones <vashaun.jo...@gmail.com> wrote: >> Listers, >> >> How do I install the KNFB Reader software using the Mac? I don't have a >> screen reader package on the phone so this may make it doublely hard! Any >> help is appreciated! >> >> VaShaun, >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To post to this group, send email to macvisionar...@googlegroups.com. >> To unsubscribe from this group, send email to >> macvisionaries+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/macvisionaries?hl=en. >> >> > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To post to this group, send email to macvisionar...@googlegroups.com. > To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > > -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to macvisionar...@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
