Hi Sarah, You are correct. In fact, the can be upside down, right side up, 90 degrees rotated and very seriously skewed and we will resolve the issue.
In fact, for all intents and purposes, the Digit-Eyes package is insensitive to orientation of the code -- there is almost no amount of skew that the system cannot resolve. The approach of holding the phone stable and moving the product in front of it (as described for the idMate below) also works well on Digit-Eyes and at least when people are starting out, we recommend trying this. The autofocus camera on the iPhone 3Gs tends to do better in getting a capture when the item is moving away from it. So we recommend starting by holding (say) the bottom of the box close to the camera and then moving it away from the camera until you get the beep that indicates that a capture has been made. Cordially, Nancy Miracle On Sun, Jun 27, 2010 at 5:46 AM, Sarah Alawami <marri...@gmail.com> wrote: > To my knoledge, the bar code can be upside down and slightly crocked. it I > think emits a click to let yo now if you are getting clode to it and you > just have to look for it but once you know where the bar code is on many > products you are fine. > > S > On Jun 26, 2010, at 11:16 PM, Bryan Smart wrote: > > > With Digit-Eyes, how do you find the bar code? When I was involved with > the development of an accessible bar code system a few years back, cameras > didn't do a good job. For the bar code recognition to work, the camera > couldn't face the bar code at an angle, at it had to be right-side-up. Of > course, a blind person doesn't necessarily know where on the box, can, or > bottle the bar code is to be found, so that creates a challenge. That's > partly why the ID Mate is so expensive. They must use a 3D laser scanner, > like is used in the check-out line at a grocery store. Those perform an > active scan, and can register bar codes at any angle, and even on curved > surfaces. You can basically hold up the scanner and turn the container in > front of the camera, and it will automatically scan the bar code as soon as > it's visible, regardless of the bar code's orientation. > > > > My thoughts were that the iPhone app would be like trying to read a bar > code with a CCD scanner. Yes, it would work but only if you knew where to > find the bar code, which way was right-side-up, and only if the bar code was > on a flat surface. Is it better than that? > > > > Bryan > > > > -----Original Message----- > > From: macvisionaries@googlegroups.com [mailto: > macvisionar...@googlegroups.com] On Behalf Of Allison Manzino > > Sent: Saturday, June 26, 2010 10:03 AM > > To: macvisionaries@googlegroups.com > > Subject: Re: saytext: new OCR app for IPhone > > > > Hi Bryan and all, > > > > I can say with certainty that the camera on the 3GS works well for the > new bar code reader that Josh Lioncourt was talking about the other day > Digit-Eyes. I have downloaded it and it works well. Not having any > experience with the Iphone 4, I can't say about the cameras. I know it has > two according to Cara Quin's podcast. Have a great day. > > > > Allison > > > > On Jun 26, 2010, at 5:41 AM, Scott Howell wrote: > > > >> Bryan, > >> > >> From what I have heard, the 3GS camera will do the job even if it is not > as good as the new iPhone 4. I will be very interested in how this > application performs despite the limitations of the 3GS. > >> On Jun 26, 2010, at 2:52 AM, Bryan Smart wrote: > >> > >>> The iPhone 4 should do a great job with this app. The 5 megapixel > camera provides the level of resolution that assisted KNFB Reader so much. > With the lower quality cameras, the DPI of scanned images is too low. > >>> > >>> Bryan > >>> > >>> -----Original Message----- > >>> From: macvisionaries@googlegroups.com > >>> [mailto:macvisionar...@googlegroups.com] On Behalf Of Ricardo Walker > >>> Sent: Friday, June 25, 2010 11:30 PM > >>> To: macvisionaries@googlegroups.com > >>> Subject: Re: saytext: new OCR app for IPhone > >>> > >>> No, > >>> > >>> The iPod touch doesn't have a camera. > >>> On Jun 25, 2010, at 11:26 PM, Courtney Curran wrote: > >>> > >>>> Hi, > >>>> Will this work with the Ipod Touch also? > >>>> Courtney > >>>> On Jun 25, 2010, at 11:20 PM, Ricardo Walker wrote: > >>>> > >>>>> Hi, > >>>>> > >>>>> I don't think it's out yet. > >>>>> > >>>>> I couldn't find it in the app store. > >>>>> > >>>>> hth > >>>>> On Jun 25, 2010, at 9:15 PM, John J Herzog wrote: > >>>>> > >>>>>> Hi all, > >>>>>> I just got this link from a friend of mine. Apparently, this app is > free, and it performs OCR using the new IPhone. It's different from the one > that emails your image to a server and then gives you back text. This one > actually performs OCR on the phone. > >>>>>> Furthermore, it automatically takes pictures once the camera is > aligned with the center of the document. > >>>>>> Check out this link for more information. > >>>>>> > >>>>>> http://www.docscannerapp.com/saytext/ > >>>>>> > >>>>>> Can someone let me know how it works? > >>>>>> John > >>>>>> > >>>>>> -- > >>>>>> You received this message because you are subscribed to the Google > Groups "MacVisionaries" group. > >>>>>> To post to this group, send email to > macvisionar...@googlegroups.com. > >>>>>> To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > >>>>>> For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > >>>>>> > >>>>> > >>>>> -- > >>>>> You received this message because you are subscribed to the Google > Groups "MacVisionaries" group. > >>>>> To post to this group, send email to macvisionaries@googlegroups.com > . > >>>>> To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > >>>>> For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > >>>>> > >>>> > >>>> -- > >>>> You received this message because you are subscribed to the Google > Groups "MacVisionaries" group. > >>>> To post to this group, send email to macvisionar...@googlegroups.com. > >>>> To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > >>>> For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > >>>> > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > Groups "MacVisionaries" group. > >>> To post to this group, send email to macvisionar...@googlegroups.com. > >>> To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > >>> For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > Groups "MacVisionaries" group. > >>> To post to this group, send email to macvisionar...@googlegroups.com. > >>> To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > >>> For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > >>> > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups "MacVisionaries" group. > >> To post to this group, send email to macvisionar...@googlegroups.com. > >> To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > >> For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > >> > > > > -- > > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > > To post to this group, send email to macvisionar...@googlegroups.com. > > To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > > > > -- > > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > > To post to this group, send email to macvisionar...@googlegroups.com. > > To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > > > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To post to this group, send email to macvisionar...@googlegroups.com. > To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com<macvisionaries%2bunsubscr...@googlegroups.com> > . > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > > -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to macvisionar...@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
