> Hi James, You asked: Does anyone know how to install RAM on the White MacBooks? can anyone give > > step by step instructions please?
TK: The installation of RAM is fairly straight forward on those machines. You'll need a set of precision screwdrivers in order to do this and make sure you're in a location that does not have static electricity. A static strip is always a good idea. 1. Shutdown your MacBook and ensure the power cable is disconnected. 2. close it up and turn it upside down. 3. Use a coin or your fingernail to unlock the battery and remove it. 4. On the long side of the battery opening, there are three little screws that you'll need to loosen. The screws will be evenly spaced along that side. The screws do not actually totally come away from the casing as they have a stopper to keep them attached to the plastic shielding. 5. Once they are sufficiently loose, you can pull the shielding away to reveal access to the RAM. This shielding comes out in the shape of an "L". Be extremely careful not to damage this. 6. Now there are usually two sticks of RAM that you can access. There should be a lever sort of thing that you pull from one side of, that will partially release the RAM. You can then gently grab it with your fingers and pull it out and place it on the static bag that your new RAM came in. 7. Put the new RAM in the same slot that the old RAM was in. You need to press firmly and it will sort of snap into place. this is the tricky area as you need to press firmly but do not force it in. If you have the RAM upside down it should not actually seat properly but if you force it, you will damage the receiving end of the slot. 8. Perform #6 and #7 for the other stick of RAM. 9. Replace the shield and then tighten the screws. 10. Replace your battery and lock it in place. That should do it. You should place the old RAM in the static bags that your new RAM came in for safe keeping. If your computer does not make the chime noise when you attempt to start it after the installation then you've either installed it incorrectly, you have a bad stick of RAM or the RAM is not compatible with your unit. In these cases, try removing one stick at a time to determine if one or the other is bad or if the problem is something else. HTH. Later... > Tim Kilburn & Carter the Canine Fort McMurray, AB Canada --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to macvisionaries@googlegroups.com To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en -~----------~----~----~----~------~----~------~--~---
