Steve, Thanks, that worked. First I "cold booted", then turned the T102 off for 10 seconds, then powered back on and started BASIC and issued CALL 63012 and execution went back to the Menu and REXMGR was loaded.
I will have to put the "Power cycle" step in my REX Quick Ref Guide. In case this happens again. I have the "ROM II + Cleauseu" Option ROM installed as my primary and just doing a "cold boot" and CALL 63012 was getting me to the Menu with the "Cleauseu" prompt in the lower right corner as it usually does when I enable it. I was working on understanding some code I got from one of the Club 100 libraries, when my "Label line" became corrupted and the printer was just responding with jibbrish. I expected RAM corruption so decided to cold boot, knowing I would have to restart REX. Thanks again, PeterN On Thu, Apr 16, 2026 at 2:49 PM <[email protected]> wrote: > > ------------------------------ > > Message: 4 > Date: Thu, 16 Apr 2026 06:23:16 -0400 > From: Stephen Adolph <[email protected]> > To: "[email protected]" <[email protected]> > Subject: Re: [M100] Need REX Help! > Message-ID: > < > camcmnv5rgmucifp1qzjfsrcefg0mpwjr8_-jnv6vfnqf7_b...@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > It sounds like you power cycled the laptop, but in case you haven't please > do that and retry Call 63012. > > Steve > > > On Thursday, April 16, 2026, Peter Noeth <[email protected]> wrote: > > > I have been using the original REX for years now with no problem, until > > tonight. > > > > I was working on a program on my T102 (I usually develop on the > > machine), and discovered I was not getting proper response from the > > printer. I tried resetting, but that did not help. So I performed a cold > > boot, knowing I would have to restart REX, but when I made the CALL 63012 > > to restart, all I get is the option ROM I have installed into REX. REX is > > not creating the REXMGR file so I cannot reload any RAM images. > > > > I think that I was supposed to "unhook" REX first, but it has been > years > > since I installed it and didn't think about it. > > > > What do I need to do to get the REX working again? I do not have any > > programming environment for REX, so I can't re-flash it or anything like > > that. > > > > It must store its internal operating flags in flash, because shutting > > off the T102 memory battery did not help. > > > > > > Regards, > > PeterN > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.bitchin100.com/private.cgi/m100-bitchin100.com/attachments/20260416/64c68690/attachment-0001.htm > > > >
