Here's the ones I ordered from Mouser when I recapped mine: 667-EEU-FK1C102 Mfr. #: EEU-FK1C102 Desc.: Aluminum Electrolytic Capacitors - Radial Leaded Aluminum Electrolytic Capacitors - Radial Leaded 16VDC 1000uF 20% AEC-Q200
Mouser #: 871-B41856C6227M000 Mfr. #: B41856C6227M000 Desc.: Aluminum Electrolytic Capacitors - Radial Leaded Aluminum Electrolytic Capacitors - Radial Leaded 50VDC 220uF 20% STD Leads The 1uF and 22uF were replaced with general purpose capacitors I had in inventory. I don't have the part numbers for them. Use the Mouser filter to search for caps with the approximate physical size. Just about anything that fits will work (same value and voltage). The recapped power supply was "burned in" for 48 hours under load just to make sure nothing else was waiting to fail. All DC voltages and ripple voltages on C107and C108 checked good under test load and with the actual DVI board and drives attached. It has been running for almost a year off and on since. Jerry On Tue, Jan 25, 2022 at 3:47 PM Dan Eicher <[email protected]> wrote: > Hi, > > I'm looking to finish ordering parts to recap the power supply on my DVI > 26-3806. > > Jerry has already given me the first three hard parts. > > I have four left on my needy list. > > I found part numbers in the 26-3806 Service Manual. > > Part Description Manufacturer Part Number > C102 Cap, Elect 1µF/50V/+-20% CEVG010A3N > C105 Cap, Elect 22µF/16V/+-20% CEVD220A3N > C107 Cap, Elect 1000µF/10V/+-20% CEAC102A3N > C108 Cap, Elect 220µF/10V/+-20% CEVC221A3N > > Can someone point me to a mouser part number that would be compatible? > > I suspect part of the part number might specify the height of the device > and spacing of through holes? > > Even Google, who knows everything, returns nothing in regard to the > manufacturer's part number. > > Thanks in advance for your help. > >
