This should work as far as I know... but Brian W now supports DL+. LaddieAlpha.EXE (runs on Mono) is known to work with the large Option ROM hex files and what we confirmed REX working with.
-- John. On Fri, Jul 9, 2021 at 4:59 PM ExPLIT | Pawel Radomychelski < [email protected]> wrote: > Hello collegues! > > Thanks to Steven, i got an REX# for my NEC PC-8201. > Anything is working fine, i have TS-DOS and Ultimate ROM II on my REX#. > But if i want to install additional ROM (In my case R2CNEC) over the > REXMGR the transfer is somehow hanging... > > To my System: > I have an Debian 11 Notebook with USB2SERIAL Adapter installed, DeskLink+ > is working on /dev/ttyUSB0 > If i start to load the ROM from the REXMGR over TPDD it starts, but than > it hangs without any progress... > used > > this command: > dl /dev/ttyUSB0 -p=/media/sdb1/Firmware/Notebook/NEC/PC-8201/Option\ ROM/ > -v > > Also tried with -c Option for Hardware flow control. Same result. > > dl /dev/ttyUSB0 -p=/media/sdb1/Firmware/Notebook/NEC/PC-8201/Option\ ROM/ > -c -v > > > I attach the debugging file. Maybe some of you had the same prob. > > > Thanks > > > > -- > > Kind regards / > Mit freundlichen Grüßen > > ExPLIT IT Solutions > Pawel Radomychelski > > > > >
