Am Sonntag, den 10.09.2017, 07:49 +0200 schrieb racoon: > On 09.09.2017 15:32, Jürgen Spitzmüller wrote: > > Am Samstag, den 09.09.2017, 11:31 +0200 schrieb racoon: > > > I have a document that works fine in 2.2 but generates an error > > > in > > > 2.3 > > > > > > "I found no \citation commands---while reading file ..." > > > > Which bibliography processor do you have set? > > I had it set to automatic. Setting it to biber worked. Oddly enough > it > continued to work after setting it to automatic again.
"Automatic" only does the right thing if you use native biblatex support. Otherwise, it will select BibTeX, since LyX thinks you use BibTeX. > > > It uses Biblatex according to [1]. I know that native support for > > > Biblatex has been introduced in 2.3. So will I have to change my > > > documents where I used [1] somehow? > > > > You have to change it in order to use the native support. But you > > still > > should be able to continue with the workaround. > > Maybe it would be nice to have a guide how to get from [1] to native > support at [1]. Is there something like that? If not I can try to > make > the switch and write it down. Yes, it would be nice to document issues there. Note that the workaround was never officially supported, so the transition might entails some caveats (although not too much hopefully). Jürgen > > Daniel > > > > > Jürgen > > > > > > > > Daniel > > > > > > [1] http://wiki.lyx.org/BibTeX/Biblatex#toc3 > > > > >
signature.asc
Description: This is a digitally signed message part
