with the fact of Jean-Pierres answer i solved the problem!
the package changebar is needed by fancyvrb. but the documentation
says nothing about the fact, that this package is not loaded
by fancyvrb. i had a look at fancyvrb.sty and tried lyx with
\usepackage{changebar} and everything works.
neverthelesse i don't really understand, why it works with
two latex runs when i don't load the changebar-package.
the following is only for your interest. you can forget it,
when it don't belong to lyx.
"Lars Gullik Bjønnes" wrote:
>
> Herbert Voss <[EMAIL PROTECTED]> writes:
>
> | running latex by hand produces the following error,
> | same as in lyx!
> |
> | ! Undefined control sequence.
> | l.5 \cb@barpoint
> | {1}{3}{2.0pt}
> |
> | with full path in \VerbatimInput makes no change.
>
> You are not trying to tell that this command is provided in the .aux
> file are you?
> This almost looks like some changebar command...
as i wrote it's the error from latex. ;-)
the aux-file is
------
\relax
\catcode`"\active
\select@language{german}
\@writefile{toc}{\select@language{german}}
\@writefile{lof}{\select@language{german}}
\@writefile{lot}{\select@language{german}}
------
from my point of view it's the catcode-command which
makes it.
the lyx-log-file is attached. when i copy the aux-file
in the lyx temp-file or run latex by hand in the lyx-temp-dir
and than run lyx again, everything is ok. editing something in
the lyx-file, running dvi-view produces the same, because
the aux-file was deleted.
to Jean-Pierre:
> Package: fancyvrb 1998/07/17
> Style option: `fancyvrb' v2.6, with DG/SPQR fixes <1998/07/17>
this might be the problem, because i have the latest version
\def\fileversion{2.7, with DG/SPQR fixes}
\def\filedate{2000/03/21}
Herbert
--
[EMAIL PROTECTED]
http://perce.de/voss
This is TeX, Version 3.14159 (Web2C 7.3.1) (format=latex 2000.3.11) 17 AUG 2000 12:27
**fancyvrb.tex
(fancyvrb.tex
LaTeX2e <1999/12/01> patch level 1
Babel <v3.6Z> and hyphenation patterns for american, french, german, ngerman, n
ohyphenation, loaded.
(/usr/share/texmf/tex/latex/base/article.cls
Document Class: article 1999/09/10 v1.4a Standard LaTeX document class
(/usr/share/texmf/tex/latex/base/size12.clo
File: size12.clo 1999/09/10 v1.4a Standard LaTeX file (size option)
)
\c@part=\count79
\c@section=\count80
\c@subsection=\count81
\c@subsubsection=\count82
\c@paragraph=\count83
\c@subparagraph=\count84
\c@figure=\count85
\c@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (/usr/share/texmf/tex/latex/psnfss/helvet.sty
Package: helvet 1999/03/29 PSNFSS v.7.2 Helvetica font as default sans : S Raht
z
) (/usr/share/texmf/tex/latex/base/fontenc.sty
Package: fontenc 1999/12/08 v1.9x Standard LaTeX package
(/usr/share/texmf/tex/latex/base/t1enc.def
File: t1enc.def 1999/12/08 v1.9x Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 38.
)) (/usr/share/texmf/tex/latex/base/inputenc.sty
Package: inputenc 1999/09/17 v0.992 Input encoding file
(/usr/share/texmf/tex/latex/base/latin1.def
File: latin1.def 1999/09/17 v0.992 Input encoding file
)) (/usr/share/texmf/tex/generic/babel/babel.sty
Package: babel 1999/09/09 v3.6Z The Babel package
(/usr/share/texmf/tex/generic/babel/germanb.ldf
Language: germanb 1999/04/05 v2.6g German support from the babel system
(/usr/share/texmf/tex/generic/babel/babel.def
File: babel.def 1999/09/09 v3.6Z Babel common definitions
\babel@savecnt=\count87
\U@D=\dimen103
)
\l@austrian = a dialect from \language\l@german
Package babel Info: Making " an active character on input line 71.
)) (/usr/share/texmf/tex/latex/fancyvrb/fancyvrb.sty
Package: fancyvrb 2000/03/21
Style option: `fancyvrb' v2.7, with DG/SPQR fixes <2000/03/21> (tvz) (/usr/shar
e/texmf/tex/latex/graphics/keyval.sty
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
\FV@CodeLineNo=\count88
\FV@InFile=\read1
\FV@TabBox=\box26
\c@FancyVerbLine=\count89
\FV@StepNumber=\count90
\FV@OutFile=\write3
) (/usr/share/texmf/tex/latex/fancyvrb/fancyvrb.aux
! Undefined control sequence.
l.5 \cb@barpoint
{1}{3}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! LaTeX Error: Missing \begin{document}.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
l.5 \cb@barpoint{1
}{3}{2.0pt}
You're in trouble here. Try typing <return> to proceed.
If that doesn't work, type X <return> to quit.
! Undefined control sequence.
l.6 \cb@barpoint
{4}{3}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.8 \cb@barpoint
{5}{3}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.9 \cb@barpoint
{8}{3}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.12 \cb@barpoint
{9}{4}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.13 \cb@barpoint
{12}{4}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.15 \cb@barpoint
{13}{4}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.16 \cb@barpoint
{16}{4}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.20 \cb@barpoint
{17}{5}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.21 \cb@barpoint
{20}{5}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.23 \cb@barpoint
{21}{5}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.24 \cb@barpoint
{24}{5}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.26 \cb@barpoint
{25}{6}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.27 \cb@barpoint
{28}{6}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.28 \cb@barpoint
{29}{6}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.29 \cb@barpoint
{32}{7}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.30 \cb@barpoint
{33}{8}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.32 \cb@barpoint
{36}{8}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.33 \cb@barpoint
{37}{8}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.34 \cb@barpoint
{40}{8}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.35 \cb@barpoint
{41}{8}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.36 \cb@barpoint
{44}{9}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.38 \cb@barpoint
{45}{11}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.39 \cb@barpoint
{48}{11}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.45 \cb@barpoint
{49}{13}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.47 \cb@barpoint
{52}{13}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.58 \cb@barpoint
{53}{15}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.59 \cb@barpoint
{57}{15}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.60 \cb@barpoint
{60}{15}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.61 \cb@barpoint
{56}{16}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.67 \cb@barpoint
{61}{18}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.75 \cb@barpoint
{64}{19}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.77 \cb@barpoint
{65}{19}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.78 \cb@barpoint
{68}{19}{2.0pt}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
)
\openout1 = `fancyvrb.aux'.
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 22.
LaTeX Font Info: ... okay on input line 22.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 22.
LaTeX Font Info: ... okay on input line 22.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 22.
LaTeX Font Info: ... okay on input line 22.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 22.
LaTeX Font Info: ... okay on input line 22.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 22.
LaTeX Font Info: ... okay on input line 22.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 22.
LaTeX Font Info: ... okay on input line 22.
[1
]
LaTeX Font Info: External font `cmex10' loaded for size
(Font) <14.4> on input line 30.
LaTeX Font Info: External font `cmex10' loaded for size
(Font) <7> on input line 30.
LaTeX Font Info: Try loading font information for T1+cmtt on input line 35.
(/usr/share/texmf/tex/latex/base/t1cmtt.fd
File: t1cmtt.fd 1999/05/25 v2.5h Standard LaTeX font definitions
) [2] [3] (fancyvrb.aux) )
Here is how much of TeX's memory you used:
1192 strings out of 25901
14300 string characters out of 197578
61395 words of memory out of 384000
4160 multiletter control sequences out of 10000+15000
7468 words of font info for 22 fonts, out of 400000 for 1000
14 hyphenation exceptions out of 1000
26i,6n,28p,179b,285s stack positions out of 400i,100n,500p,50000b,4000s
Output written on fancyvrb.dvi (3 pages, 2508 bytes).
