Am 17.05.2010 16:53, schrieb l...@zitta.fr: > Le 17/05/2010 18:09, Wilhelm a écrit : > >> Am 17.05.2010 14:59, schrieb zitta.fr: >> >>> Hi, >>> >>> try this : >>> >>> cat> /path_to_lucid_root/etc/init/console.conf >>> # console - getty >>> # >>> # This service maintains a getty on stdin from the point the >>> system is >>> # started until it is shut down again. >>> >>> start on stopped rc RUNLEVEL=[2345] >>> stop on runlevel [!2345] >>> >>> respawn >>> exec /sbin/getty -8 38400 console >>> >>> >> this is exactly the contents of /etc/init/tty1.conf >> > Sorry, I did let a comment that could makes you think it is tty1.conf > But no, it is not. > Look at this diff : > > --- tty1.conf 2010-04-02 02:13:25.000000000 +0200 > +++ console.conf 2010-05-17 16:59:53.770083492 +0200 > @@ -1,4 +1,4 @@ > -# tty1 - getty > +# console - getty > # > # This service maintains a getty on tty1 from the point the system is > # started until it is shut down again. > @@ -7,4 +7,4 @@ > stop on runlevel [!2345] > > respawn > -exec /sbin/getty -8 38400 tty1 > +exec /sbin/getty -8 38400 console > >> but it doesn't work >> > did you even try? >
oh yes, overlooked that. Ok, works fine! Thanks! >> >>> Regards, >>> >>> Guillaume ZITTA >>> >>> Le 17/05/2010 16:31, Wilhelm a écrit : >>> >>>> Hi all, >>>> >>>> I have a slight problem using a lucid container (on a lucid host): if I >>>> start the container via lxc-start, no console login starts up. I >>>> have to >>>> use lxc-console from a differnet terminal. If I use a lenny container, >>>> lxc-start shows the start up log messages and finally the getty/login. >>>> >>>> I'm using the lxc-packages from lucid: >>>> >>>> r...@ubuntu01:~# dpkg -l lxc >>>> Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig >>>> Löschen/Halten >>>> | Status=Nicht/Installiert/Config/U=Entpackt/Fehlgeschl. Konfiguration/ >>>> Halb installiert/Trigger erWartet/Trigger anhängig >>>> |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: >>>> GROSS=schlecht) >>>> ||/ Name >>>> Version Beschreibung >>>> +++-======================================-======================================-============================================================================================ >>>> >>>> ii lxc >>>> 0.6.5-1 Linux containers userspace tools >>>> >>>> >>>> The start trace is: >>>> >>>> r...@ubuntu01:/var/lib/lxc/lucid# lxc-start -n lucid >>>> --logfile=/dev/stderr --logpriority=TRACE -- /sbin/init --verbose >>>> lxc-start 1274106224.666 INFO lxc_conf - tty's configured >>>> lxc-start 1274106224.669 DEBUG lxc_start - sigchild >>>> handler set >>>> lxc-start 1274106224.669 INFO lxc_start - 'lucid' is >>>> initialized >>>> lxc-start 1274106224.681 DEBUG lxc_conf - instanciated >>>> macvlan >>>> 'mcwEvnvl', index is '8' and mode '0' >>>> lxc-start 1274106224.699 DEBUG lxc_cgroup - using cgroup >>>> mounted at '/lxc-cgroup' >>>> lxc-start 1274106224.699 DEBUG lxc_cgroup - >>>> '/lxc-cgroup/20474' renamed to '/lxc-cgroup/lucid' >>>> lxc-start 1274106224.711 DEBUG lxc_conf - move 'eth1' to >>>> '20474' >>>> lxc-start 1274106224.711 INFO lxc_conf - 'lucid' >>>> hostname has >>>> been setup >>>> lxc-start 1274106224.713 DEBUG lxc_conf - mac address >>>> '4a:49:43:49:79:bd' on 'eth0' has been setup >>>> lxc-start 1274106224.714 DEBUG lxc_conf - 'eth0' has been >>>> setup >>>> lxc-start 1274106224.714 INFO lxc_conf - network has >>>> been setup >>>> lxc-start 1274106224.715 DEBUG lxc_cgroup - using cgroup >>>> mounted at '/lxc-cgroup' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.deny' set to 'a' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 1:3 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 1:5 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 5:1 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 5:0 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 4:0 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 4:1 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 1:9 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 1:8 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 136:* rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 5:2 rwm' >>>> lxc-start 1274106224.716 DEBUG lxc_conf - cgroup >>>> 'devices.allow' set to 'c 254:0 rwm' >>>> lxc-start 1274106224.716 INFO lxc_conf - cgroup has been >>>> setup >>>> lxc-start 1274106224.716 INFO lxc_conf - mount points have >>>> been setup >>>> lxc-start 1274106224.716 INFO lxc_conf - console >>>> '/dev/pts/2' >>>> mounted to '/var/lib/lxc/lucid/rootfs/dev/console' >>>> lxc-start 1274106224.716 INFO lxc_conf - 4 tty(s) has >>>> been setup >>>> lxc-start 1274106224.717 DEBUG lxc_conf - temporary >>>> mountpoint >>>> for old rootfs is './lxc-oldrootfs-E19bcw' >>>> lxc-start 1274106224.717 DEBUG lxc_conf - pivot_root syscall >>>> to '/lxc-oldrootfs-E19bcw' successful >>>> lxc-start 1274106225.062 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/dev/pts' >>>> lxc-start 1274106225.091 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/dev/shm' >>>> lxc-start 1274106225.162 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/sys/fs/fuse/connections' >>>> lxc-start 1274106225.178 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/sys/kernel/debug' >>>> lxc-start 1274106225.194 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/sys/kernel/security' >>>> lxc-start 1274106225.210 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/proc' >>>> lxc-start 1274106225.226 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/var/run' >>>> lxc-start 1274106225.243 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/var/lock' >>>> lxc-start 1274106225.258 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/lib/init/rw' >>>> lxc-start 1274106225.274 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/boot' >>>> lxc-start 1274106225.290 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/lxc-cgroup' >>>> lxc-start 1274106225.310 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/var/lib/lxc/lucid/rootfs/dev/console' >>>> lxc-start 1274106225.327 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/var/lib/lxc/lucid/rootfs/dev/tty1' >>>> lxc-start 1274106225.342 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/var/lib/lxc/lucid/rootfs/dev/tty2' >>>> lxc-start 1274106225.359 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/var/lib/lxc/lucid/rootfs/dev/tty3' >>>> lxc-start 1274106225.374 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/var/lib/lxc/lucid/rootfs/dev/tty4' >>>> lxc-start 1274106225.390 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/dev' >>>> lxc-start 1274106225.406 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw/sys' >>>> lxc-start 1274106225.423 DEBUG lxc_conf - umounted >>>> '/lxc-oldrootfs-E19bcw' >>>> lxc-start 1274106225.424 INFO lxc_conf - pivoted to >>>> '/tmp/lxc-rNhQTX7' >>>> lxc-start 1274106225.424 INFO lxc_conf - created new pts >>>> instance >>>> lxc-start 1274106225.424 DEBUG lxc_conf - capabilities has >>>> been setup >>>> lxc-start 1274106225.424 NOTICE lxc_conf - 'lucid' is setup. >>>> lxc-start 1274106225.424 NOTICE lxc_start - exec'ing >>>> '/sbin/init' >>>> lxc-start 1274106225.425 NOTICE lxc_start - '/sbin/init' >>>> started with pid '20474' >>>> lxc-start 1274106225.425 DEBUG lxc_utils - closing fd '1' >>>> lxc-start 1274106225.425 DEBUG lxc_utils - closing fd '0' >>>> lxc-start 1274106225.425 DEBUG lxc_utils - closed all >>>> inherited file descriptors >>>> init: Handling startup event >>>> init: tty1 goal changed from stop to start >>>> init: tty1 state changed from waiting to starting >>>> init: Handling starting event >>>> init: tty1 state changed from starting to pre-start >>>> init: tty1 state changed from pre-start to spawned >>>> init: tty1 main process (2) >>>> init: tty1 state changed from spawned to post-start >>>> init: tty1 state changed from post-start to running >>>> init: Handling started event >>>> >>>> >>>> and the processes inside the container are: >>>> >>>> r...@ubuntu01:~# lxc-ps --lxc aux >>>> CONTAINER USER PID %CPU %MEM VSZ RSS TTY STAT START >>>> TIME COMMAND >>>> lucid root 20474 0.0 0.2 2260 640 ? Ss 16:23 >>>> 0:00 /sbin/init >>>> lucid root 20487 0.0 0.1 1720 492 pts/3 Ss+ 16:23 >>>> 0:00 /sbin/getty -8 38400 tty1 >>>> r...@ubuntu01:~# >>>> >>>> (well, I disabled all upstart services but tty1) >>>> >>>> Any hints? >>>> >>>> >>>> >> >> > -- Wilhelm ------------------------------------------------------------------------------ _______________________________________________ Lxc-devel mailing list Lxc-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/lxc-devel
