On 10/06/16 20:04, Erik Christiansen via luv-main wrote:
Do you have anything interesting in the uncommented part of epson.conf ?
As requested:
cat /etc/sane.d/epson.conf
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb
and the kernel module
# For any system with libusb support (which is pretty much any recent
Linux distribution) the
# following line is sufficient. This however assumes that the connected
scanner (or to be more
# accurate, it's device ID) is known to the backend.
usb
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x110
# And for the scanner module, use the following configuration:
#usb /dev/usbscanner0
#usb /dev/usb/scanner0
Not sure if I can make any other suggestions.
_______________________________________________
luv-main mailing list
[email protected]
https://lists.luv.asn.au/cgi-bin/mailman/listinfo/luv-main
