El Lunes 14 Noviembre 2005 09:41, J. Mario Oroz escribió: Hola, a mi me paso lo mismo, asi que opté por fashearlo con el firmware original de Aztech y santo remedio. Como el modem viene con un firmware de arnet, en mi caso, no me funcionó. Si te animas a flashearlo, te paso todo lo que necesitas para hacerlo.
Besos > [Postie este mail en Mix por error, debe ir aquí!] > > Buenas Listeros; > > Les comento el entorno: > Debian Sarge 3.1 kernel 2.4.27-2-386 > Modem Aztech DSL 305EU con salida Ethernet > -configurado como bridge porque los vivos de arnet me > lo dieron conf. como router y me autoconectaba y eso no era lo > que queria- > > Con realcion a que interface esta conectada; pues hay 2 ethernets: > > eth0 Link encap:Ethernet HWaddr 00:10:5A:99:25:8E > inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:1038188 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1210828 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:159945194 (152.5 MiB) TX bytes:873043081 (832.5 MiB) > Interrupt:18 Base address:0xd880 > eth1 Link encap:Ethernet HWaddr 00:10:4B:9D:3E:11 > inet addr:200.73.xxx.xxx Bcast:200.73.xxx.xxx > Mask:255.255.xxx.xxx > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:1542212 errors:5 dropped:0 overruns:0 frame:10 > TX packets:1209372 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:899493912 (857.8 MiB) TX bytes:191168693 (182.3 MiB) > Interrupt:21 Base address:0xdc00 > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:47390 errors:0 dropped:0 overruns:0 frame:0 > TX packets:47390 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:5838866 (5.5 MiB) TX bytes:5838866 (5.5 MiB) > -------- > La eth1 esta conectada aun servicio WDSL, con ip Publica y fija, en esta > interface coloco el > cable que sale del modem/router Aztech. > > El tema es que pppoeconf detecta y configura la coneccion adsl; > ======> dsl-provider > # Configuration file for PPP, using PPP over Ethernet > # to connect to a DSL provider. > # > # See the manual page pppd(8) for information on all the options. > > ## > # Section 1 > # > # Stuff to configure... > > # MUST CHANGE: Uncomment the following line, replacing the > [EMAIL PROTECTED] # by the DSL user name given to your by your DSL > provider. > # (There should be a matching entry in /etc/ppp/pap-secrets with the > password.) > #user [EMAIL PROTECTED] > > # Use the pppoe program to send the ppp packets over the Ethernet link > # This line should work fine if this computer is the only one accessing > # the Internet through this DSL connection. This is the right line to use > # for most people. > pty "/usr/sbin/pppoe -I eth1 -T 80 -m 1452" > > # An even more conservative version of the previous line, if things > # don't work using -m 1452... > #pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1412" > > # If the computer connected to the Internet using pppoe is not being used > # by other computers as a gateway to the Internet, you can try the > following # line instead, for a small gain in speed: > #pty "/usr/sbin/pppoe -I eth0 -T 80" > > # The following two options should work fine for most DSL users. > > # Assumes that your IP address is allocated dynamically > # by your DSL provider... > noipdefault > # Try to get the name server addresses from the ISP. > #usepeerdns > # Use this connection as the default route. > # Comment out if you already have the correct default route installed. > defaultroute > > ## > # Section 2 > # > # Uncomment if your DSL provider charges by minute connected > # and you want to use demand-dialing. > # > # Disconnect after 300 seconds (5 minutes) of idle time. > > #demand > #idle 300 > > ## > # Section 3 > # > # You shouldn't need to change these options... > > hide-password > lcp-echo-interval 60 > lcp-echo-failure 3 > # Override any connect script that may have been set in /etc/ppp/options. > connect /bin/true > noauth > persist > mtu 1492 > > # RFC 2516, paragraph 7 mandates that the following options MUST NOT be > # requested and MUST be rejected if requested by the peer: > # Address-and-Control-Field-Compression (ACFC) > #noaccomp > # Asynchronous-Control-Character-Map (ACCM) > #default-asyncmap > > #plugin rp-pppoe.so eth1 > user "[EMAIL PROTECTED]" > <====== fin dsl-provider > > luego hago: > # pon dsl-provider > y en el log /var/log/messages > veo que se conecta; autentifica correctamente y luego de un segundo > se desconecta. Se observa que hubo trafico porque marca paquetes > recibidos y enviados. En todos los intentos pasa esto y la coneccion que > reintenta continuamente: > ... > Nov 10 12:46:24 aries pppd[21728]: pppd 2.4.3 started by root, uid 0 > Nov 10 12:46:24 aries pppd[21728]: Serial connection established. > Nov 10 12:46:24 aries pppd[21728]: Using interface ppp0 > Nov 10 12:46:24 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/6 > Nov 10 12:46:24 aries pppd[21728]: PAP authentication succeeded > Nov 10 12:46:24 aries pppd[21728]: Connect time 0.0 minutes. > Nov 10 12:46:24 aries pppd[21728]: Sent 109 bytes, received 82 bytes. > Nov 10 12:46:24 aries pppd[21728]: LCP terminated by peer > Nov 10 12:46:24 aries pppd[21728]: Modem hangup > Nov 10 12:46:24 aries pppd[21728]: Connection terminated. > Nov 10 12:46:54 aries pppd[21728]: Serial connection established. > Nov 10 12:46:54 aries pppd[21728]: Using interface ppp0 > Nov 10 12:46:54 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/7 > Nov 10 12:46:55 aries pppd[21728]: PAP authentication succeeded > Nov 10 12:46:55 aries pppd[21728]: Connect time 0.1 minutes. > Nov 10 12:46:55 aries pppd[21728]: Sent 109 bytes, received 82 bytes. > Nov 10 12:46:55 aries pppd[21728]: LCP terminated by peer > Nov 10 12:46:55 aries pppd[21728]: Modem hangup > Nov 10 12:46:55 aries pppd[21728]: Connection terminated. > Nov 10 12:47:25 aries pppd[21728]: Serial connection established. > Nov 10 12:47:25 aries pppd[21728]: Using interface ppp0 > Nov 10 12:47:25 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/8 > Nov 10 12:47:25 aries pppd[21728]: PAP authentication succeeded > Nov 10 12:47:25 aries pppd[21728]: Connect time 0.0 minutes. > Nov 10 12:47:25 aries pppd[21728]: Sent 109 bytes, received 82 bytes. > Nov 10 12:47:25 aries pppd[21728]: LCP terminated by peer > Nov 10 12:47:25 aries pppd[21728]: Modem hangup > Nov 10 12:47:25 aries pppd[21728]: Connection terminated. > Nov 10 12:47:56 aries pppd[21728]: Serial connection established. > Nov 10 12:47:56 aries pppd[21728]: Using interface ppp0 > Nov 10 12:47:56 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/9 > Nov 10 12:47:56 aries pppd[21728]: PAP authentication succeeded > Nov 10 12:47:56 aries pppd[21728]: Connect time 0.1 minutes. > Nov 10 12:47:56 aries pppd[21728]: Sent 109 bytes, received 82 bytes. > Nov 10 12:47:56 aries pppd[21728]: LCP terminated by peer > Nov 10 12:47:56 aries pppd[21728]: Modem hangup > Nov 10 12:47:56 aries pppd[21728]: Connection terminated. > Nov 10 12:48:26 aries pppd[21728]: Serial connection established. > Nov 10 12:48:26 aries pppd[21728]: Using interface ppp0 > Nov 10 12:48:26 aries pppd[21728]: Connect: ppp0 <--> /dev/pts/10 > Nov 10 12:48:26 aries pppd[21728]: PAP authentication succeeded > Nov 10 12:48:27 aries pppd[21728]: Connect time 0.1 minutes. > Nov 10 12:48:27 aries pppd[21728]: Sent 109 bytes, received 82 bytes. > Nov 10 12:48:27 aries pppd[21728]: LCP terminated by peer > Nov 10 12:48:27 aries pppd[21728]: Modem hangup > Nov 10 12:48:27 aries pppd[21728]: Connection terminated. > Nov 10 12:48:44 aries pppd[21728]: Terminating on signal 15 > Nov 10 12:48:44 aries pppd[21728]: Exit. > ... > > Si les falta info... avisen! > Alguien me tira un punta! > desde ya Gracias. > Mario > _____________________________________________ > > > _______________________________________________ > Lugro mailing list > [email protected] > http://www.lugro.org.ar/mailman/listinfo/lugro -- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Natalia Victoria Morán [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] Linux User Registered #216577 - ---------------------------------------------- Actuar es fácil; pensar es difícil... Actuar según se piensa es aún más difícil... Johann Wolfgang Von Goethe -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCyqVsN0pu4F13mzURAiNIAJ0TnwFPV/Ii9MIerFifl1lgQ2+e+gCgu6LF MP4v73t5TZHTJ7R5KyLJuK8= =GeZ1 -----END PGP SIGNATURE-----
pgpvwXI7snZHR.pgp
Description: PGP signature
