> @@ -168,8 +187,7 @@ skip $isroot "Root access is needed to set bandwith
> limits. Skipping all tests."
> {
>
> # Catch sigint and try to cleanup limits
> - trap interrupt_cleanup SIGTERM
> - trap interrupt_cleanup SIGINT
> + trap interrupt_cleanup SIGTERM SIGINT
>
> BW_LIMITS=(3200 1600 800 400 200 100 50 25)
> for BW in ${BW_LIMITS[@]};
> @@ -177,6 +195,7 @@ skip $isroot "Root access is needed to set bandwith
> limits. Skipping all tests."
> diag "Test high-throughput with bandwidth limit set to
> ${BW}kbits"
>
> set_bw_limit $BW
> + ok $? "Setting bandwidth limit"
In case of failure here we should force a reset since it could lead to long
timeout/hang depending on which tc command failed?
This could also be done inside set_bw_limit at each stage.
>
> start_lttng_sessiond
> start_lttng_relayd "-o $TRACE_PATH"
> @@ -185,5 +204,6 @@ skip $isroot "Root access is needed to set bandwith
> limits. Skipping all tests."
> stop_lttng_relayd
> stop_lttng_sessiond
> reset_bw_limit
> + ok $? "Reset bandwith limits"
> done
> }
> --
> 2.11.0
>
--
Jonathan Rajotte-Julien
EfficiOS
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
