The WG would welcome your contribution in the area of OSPFv2/OSPFv3 SR 
statistics.  

Thanks,
Acee

> On Jan 21, 2025, at 12:33 PM, Joe Clarke (jclarke) <jcla...@cisco.com> wrote:
> 
> Old-school network management Joe finds that a bit sad that the monitoring 
> side of things might be lacking.  Pragmatically, I get where you’re coming 
> from and defer to the WG on what is best for the SDO, vendor and operator 
> communities for SR/OSPF.
>  Joe
>  From: Acee Lindem <acee.i...@gmail.com>
> Date: Tuesday, January 21, 2025 at 12:18
> To: Joe Clarke (jclarke) <jcla...@cisco.com>
> Cc: ops-...@ietf.org <ops-...@ietf.org>, draft-ietf-ospf-sr-yang....@ietf.org 
> <draft-ietf-ospf-sr-yang....@ietf.org>, last-call <last-c...@ietf.org>, lsr 
> <lsr@ietf.org>
> Subject: Re: Opsdir last call review of draft-ietf-ospf-sr-yang-33
> Hi Joe, 
> 
> > On Jan 21, 2025, at 11:37, Joe Clarke via Datatracker <nore...@ietf.org> 
> > wrote:
> > 
> > Reviewer: Joe Clarke
> > Review result: Ready
> > 
> > I have been asked to review this draft on behalf of the OPS Directorate.  
> > This
> > draft defines a YANG module that augments the base OSPF YANG module to add
> > Segment Routing extensions for both OSPFv2 and OSPFv3.  There isn't a lot of
> > text in here beyond the YANG tree and module itself.  From an operational
> > standpoint (not being an SR expert) I'd have to say it's ready.  I agree 
> > with
> > Reshad's YANG Doc review that as an operator I'd appreciate a more
> > comprehensive example in the appendix.
> > 
> > I also have one question.  In addition to config and state, the base OSPF
> > module defines statistics for OSPF.  What SR statistics (if any) should be
> > included in these augmentations?
> 
> Given that this document has been around for 8 years and is needed for other 
> OSPF YANG draft, SR statistics should be added in a separate 
> draft/augmentation.
> 
> Thanks,
> Acee
> 
> 
> 
> > 
> > 

_______________________________________________
Lsr mailing list -- lsr@ietf.org
To unsubscribe send an email to lsr-le...@ietf.org

Reply via email to