Hi Les,
Thanks for your reply and detailed explanation.
Yes, I really misunderstood the l2bundles encoding rules. Appendix A is very
clear to answer my questions. : )
So, for slicing requirements, I think existing flex-algo using EAG for
isolation can support the case where multiple hard isolated L2 Flex-E members
join to the same L3 parrent adjacency, and each L2 member can belongs to
differnet Flex-algo plane.
Thanks,
PSF
原始邮件
发件人：LesGinsberg(ginsberg) <[email protected]>
收件人：彭少富10053815;[email protected]
<[email protected]>;
抄送人：[email protected] <[email protected]>;[email protected]
<[email protected]>;[email protected] <[email protected]>;
日 期 ：2020年03月29日 06:40
主 题 ：RE: [Lsr] Using IS-IS Multi-Topology (MT) for Segment RoutingbasedVirtual
Transport Network
Peng –
Thanx for calling attention to your relatively new draft.
The new sub-TLV you propose in
https://tools.ietf.org/html/draft-peng-lsr-flex-algo-l2bundles-00#section-5.1
is unnecessary.
You seem to have misunderstood RFC 8668 and believe that it does not allow
advertising link attributes which are potentially common to multiple bundle
members but in a given deployment are actually unique to each bundle member.
This is incorrect.
Each L2 Bundle Attribute Descriptor defines the set of bundle members to which
the following link attributes sub-TLVs apply. That set can be one bundle member
– or it can be multiple bundle members.
In the case where you want to advertise unique EAG values for each bundle
member you can do so by using L2 Bundle Attribute Descriptors which specify a
single bundle member.
You may wish to study the Appendix in RFC 8668 which provides example encodings.
I appreciate that the encoding defined in RFC 8668 is more complex than most
TLV encodings. It represents a tradeoff between encoding efficiency and
complexity. We tried to reduce the cases where a link attribute common to
multiple bundle
members had to be advertised multiple times – but this did result in some
additional complexity in the structure of the TLV. Given the IS-IS TLV length
limitation of 255 octets and the possibility of bundles with a large number of
members this was an important
consideration.
Les
From: Lsr <[email protected]> On Behalf Of [email protected]
Sent: Friday, March 27, 2020 9:08 PM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: Re: [Lsr] Using IS-IS Multi-Topology (MT) for Segment Routing
basedVirtual Transport Network
Hi Peter, and other folks
This topic is very interesting. it happend that we also consider this topic in
draft-peng-lsr-flex-algo-l2bundles-00, and
draft-zch-lsr-isis-network-slicing-02.
I totally agree Peter that MT can not be used for L2 members. IMO, both
Flex-algo and AII can be extended to address this topic, but MT not.
Thanks,
PSF
原始邮件
发件人：PeterPsenak <[email protected]>
收件人：Dongjie (Jimmy) <[email protected]>;[email protected]
<[email protected]>;lsr <[email protected]>;
日期：2020年03月27日
23:45
主题：Re: [Lsr] Using IS-IS Multi-Topology (MT) for Segment Routing basedVirtual
Transport Network
Hi Dongjie,
On 27/03/2020 16:32, Dongjie (Jimmy) wrote:
> Hi Peter,
>
> My question actually is: where does the TLV 222 column in the IANA registry
> come from? As it is not specified in the IANA section of RFC 5120. It would
> be helpful if you or anyone else could share some more information about
> this. If normative specification of using TE attributes in TLV 222 could be
> found in an RFC, we would add a reference to it and remove the editor's note
> in section 3.1 of this document.
I guess it came with RFC 5120.
please see more inline:
>
> And please see some further replies inline about the L2 bundle discussion.
>
> -----Original Message-----
> From: Peter Psenak [mailto:[email protected]]
> Sent: Friday, March 27, 2020 4:11 PM
> To: Dongjie (Jimmy) <[email protected]>; [email protected]; lsr
> <[email protected]>
> Subject: Re: [Lsr] Using IS-IS Multi-Topology (MT) for Segment Routing based
> Virtual Transport Network
>
> Hi Dongjie,
>
> On 27/03/2020 07:56, Dongjie (Jimmy) wrote:
>> Hi Peter,
>>
>> You missed some of my comments in previous mail, could you also reply to
>> this?
>>
>>> Although the IANA registry shows that all the TE attributes could be used
>>> in TLV 222/223, this was not specified in RFC 5120 (or other RFCs I'm aware
>>> of), could you help to provide the reference to such IANA specification? In
>>> addition, it seems not all of the TE attributes are suitable to be carried
>>> at per-topology level. Thus the IANA registry may need to be updated.
>
> my reading of RFC 5120 and the existing IANA registry is that it is legal to
> advertise TE attributes in MT TLVs:
>
> https://www.iana.org/assignments/isis-tlv-codepoints/isis-tlv-codepoints.xhtml#isis-tlv-codepoints-22-23-25-141-222-223
>
> It says "y" for all TE attributes. What else do you need?
>
>>
>> And please see further replies inline with [Jie]:
>>
>> -----Original Message-----
>> From: Peter Psenak [mailto:[email protected]]
>> Sent: Thursday, March 26, 2020 7:03 PM
>> To: Dongjie (Jimmy) <[email protected]>; [email protected]; lsr
>> <[email protected]>
>> Subject: Re: [Lsr] Using IS-IS Multi-Topology (MT) for Segment Routing
>> based Virtual Transport Network
>>
>> Hi Dongjie,
>>
>> On 26/03/2020 11:57, Dongjie (Jimmy) wrote:
>>> Hi Peter,
>>>
>>> Thanks for your comments.
>>>
>>>> -----Original Message-----
>>>> From: Peter Psenak [mailto:[email protected]]
>>>> Sent: Thursday, March 26, 2020 5:23 PM
>>>> To: Dongjie (Jimmy) <[email protected]>; [email protected];
>>>> lsr <[email protected]>
>>>> Subject: Re: [Lsr] Using IS-IS Multi-Topology (MT) for Segment
>>>> Routing based Virtual Transport Network
>>>>
>>>> Hi Dongjie,
>>>>
>>>> On 26/03/2020 07:40, Dongjie (Jimmy) wrote:
>>>>> Hi Peter,
>>>>>
>>>>> As described in the abstract, the purpose of this draft is to
>>>>> define a simplified
>>>> control plane mechanism to build SR based Virtual Transport Network
>>>> (VTN), it is based on the combination of IS-IS Multi-Topology with
>>>> other IS-IS extensions, e.g. the extensions for TE, SR and L2 bundle.
>>>> In a word, it tries to reuse the existing TLVs as much as possible.
>>>>
>>>> reusing the TLVs is not something that needs a standardization.
>>>>
>>>>>
>>>>> That said, this document introduces the mechanism of specifying
>>>> per-topology TE attributes, which was not covered in the existing
>>>> IS-IS MT (RFC 5120).
>>>>
>>>> I can clearly see that TLVs defined in RFC5120 are listed in the
>>>> registry of sub-TLVs available for TLV 222/223
>>>>
>>>> https://www.iana.org/assignments/isis-tlv-codepoints/isis-tlv-codepo
>>>> i
>>>> nts.xhtm
>>>> l#isis-tlv-codepoints-22-23-25-141-222-223
>>>>
>>>> So I'm not sure what you are adding.
>>>
>>> In RFC 5120 section 7, it says that
>>>
>>> “If traffic engineering or some other applications are being applied per
>>> topology level later, the new TLVs can automatically inherit the same
>>> attributes already defined for the "standard" topology without going
>>> through long standard process to redefine them per topology.”
>>>
>>> This indicates that per-topology TE attributes is not a feature specified
>>> in RFC5120, although the TLVs can be reused.
>>
>> the text above clearly says there is no standardization required.
>>
>> [Jie] My reading of the above text is that RFC 5120 leaves the specification
>> of per-topology TE or other applications to a later document. And it is also
>> related to my below comment which you missed.
>
> my reading is different.
>
>>
>>> Although the IANA registry shows that all the TE attributes could be used
>>> in TLV 222/223, this was not specified in RFC 5120 (or other RFCs I'm aware
>>> of), could you help to provide the reference to such IANA specification? In
>>> addition, it seems not all of the TE attributes are suitable to be carried
>>> at per-topology level. Thus the IANA registry may need to be updated.
>>
>> [Jie] Maybe you could provide some information about the history of this
>> IANA registry? It assumes all the TE attributes can be applied to both TLV
>> 22 and TLV 222, which may not always be the case.
>
> registry clearly tells.
>
>>
>>>>> Similarly, it also introduces the mechanism of associating MT-IDs
>>>>> with a
>>>> particular member link of L2 bundle, which was not defined in IS-IS
>>>> L2 Bundle (RFC 8668).
>>>>
>>>> carrying MT-ID in the L2 Bundle TLV is conceptually wrong.
>>>>
>>>> It is the parent L3 link which has the association with the
>>>> particular topology ID, you can not change the topology per L2 link member.
>>>>
>>>> You are trying to overload the MT-ID with the VTN semantics, but you
>>>> can not do it here. If you need a VTN ID for the L2 member link,
>>>> which I'm not sure why, you need to define a a new attribute and not mix
>>>> it with MT-ID.
>>>
>>> In this document we try to reuse the existing IDs and TLVs to fulfil the
>>> functionality required. Since several existing TLVs defined for L3 link
>>> have been introduced for the L2 bundle member, we are considering the
>>> possibility of also carrying MT-ID as another attribute of the member link.
>>> Could you elaborate why it cannot be reused? Of course defining a new
>>> VTN-ID is another option. We are open to discussion about this.
>>
>> the reason is simple - the L3 link is already associated with the MT-ID.
>> You can not change the MT-ID of the underlying L2 link.
>>
>> [Jie] In this case, the L3 link is associated with the union of the MT-IDs
>> associated with its L2 member links.
>>
>> For example, if a L3 link has three L2 member links, which are associated
>> with MT-x, MT-y and MT-z respectively, then the L3 link is associated with
>> MT-x, MT-y and MT-z.
>
> I'm going to repeat myself here. You are misusing the MT-ID for something you
> have defined. I don't think it is correct. L2 bundle link is NOT a
> topological entity in ISIS, only the L3 link is. Associating L2 bundle link
> with a MT is conceptually wrong.
>
> If you wanted different bundle members to be part of different topologies the
> obvious solution would be to enable L3 directly on the individual links
> rather than combine them into one L3 Bundle interface.
>
> [Jie2] I agree the usage of MT-ID is extended in this case. But if an L3
> parent link participates in multiple topologies, this could help to further
> identify the member link which is only used for traffic belonging to a
> specific topology. A similar attribute is the admin-group.
no, I don't agree. You can only associate MT-ID with a L3 link, not with
L2 link.
>
> [Jie2] Enabling L3 on each individual link is another option, while it
> introduces the overhead which the L2 bundle mechanism tries to avoid.
well, if you want to use L3 constructs like MT-ID, it comes with an
overhead. I have expressed my concerns of the MT being used for what you
are trying to use it for in the past - and overhead was the main issue.
thanks,
Peter
>
> [Jie2] BTW, in the IANA section of the L2 bundle RFC 8668, it clearly
> specifies which existing sub-TLVs are allowed in the newly defined TLV 25,
> and in which existing TLVs the new sub-TLVs can be carried. Something similar
> documented in an RFC for TLV 222 would be good enough to solve my question in
> the beginning of this mail.
>
> Best regards,
> Jie
>
>
> thanks,
> Peter
>
>
>>
>> Best regards,
>> Jie
>>
>>
>> thanks,
>> Peter
>>
>>>
>>> Best regards,
>>> Jie
>>>
>>>>
>>>> thanks,
>>>> Peter
>>>>
>>>>
>>>>>
>>>>> Thus we think it is appropriate to be standard track.
>>>>>
>>>>> Best regards,
>>>>> Jie
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Lsr [mailto:[email protected]] On Behalf Of Peter Psenak
>>>>>> Sent: Wednesday, March 25, 2020 10:09 PM
>>>>>> To: [email protected]; lsr <[email protected]>
>>>>>> Subject: Re: [Lsr] Using IS-IS Multi-Topology (MT) for Segment
>>>>>> Routing based Virtual Transport Network
>>>>>>
>>>>>> Hi Chongfeng,
>>>>>>
>>>>>> what exactly is being standardized in this draft? I don't see anything.
>>>>>>
>>>>>> thanks,
>>>>>> Peter
>>>>>>
>>>>>>
>>>>>> On 25/03/2020 14:44, [email protected] wrote:
>>>>>>>
>>>>>>> Hello, folks,
>>>>>>>
>>>>>>> we have submitted a new draft of
>>>>>>> https://tools.ietf.org/html/draft-xie-lsr-isis-sr-vtn-mt-00 .
>>>>>>>
>>>>>>> It is about Using IS-IS Multi-Topology (MT) for Segment Routing
>>>>>>> based Virtual Transport Network. Enhanced VPN (VPN+) as defined
>>>>>>> in I-D.ietf-teas-enhanced-vpn aims to provide enhanced VPN
>>>>>>> service to support some applications's needs of enhanced
>>>>>>> isolation and stringent performance requirements. VPN+ requries
>>>>>>> integration between the overlay VPN and the underlay network. A
>>>>>>> Virtual Transport Network
>>>>>>> (VTN) is a virtual network which consists of a subset of the
>>>>>>> network toplogy and network resources allocated from the underlay
>>>>>>> network.
>>>>>>> A VTN could be used as the underlay for one or a group of VPN+ services.
>>>>>>> This document describes a simplified mechanism to build the SR
>>>>>>> based VTNs using IGP
>>>>>>> multi- topology together with other well-defined IS-IS extensions.
>>>>>>>
>>>>>>> Comments and suggestions are highly appreciated.
>>>>>>>
>>>>>>> Chongfeng Xie
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Lsr mailing list
>>>>>> [email protected]
>>>>>> https://www.ietf.org/mailman/listinfo/lsr
>>>>>
>>>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>
_______________________________________________
Lsr mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/lsr
_______________________________________________
Lsr mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/lsr
