> 1) try this NIC with another machine (non-Loongson); Done, it works well on x86_32 and x86_64 (both intel).
I've also tried: acpi=noirq usbcore.autosuspend=-1 Which in the past have been able to solve other serial usb issues, but none worked out... > 2) try another kind of NIC on this machine (e.g. there are MosChip mcs7830 > based USB NICs which also support true USB 2.0 speeds, or if USB 1.1 with 12 > mbit is enough, then Davicom dm9601 can be an option). I'll look for them. I acquired another one to try, but at the end it was based upon the same chipset, so also the same driver, so it didn't help. I'll look in the web... > > As for trying different module parameters you mentioned earlier, usbnet and > asix do not have any tunables, but ehci_hcd does have some, you can check > them out with "sudo modinfo ehci_hcd". Thanks a lot Roman, I'll investigate as soon as possible. I'd like a work around before going to buy something else, so this will be my first step, :-) So far no luck, but I'll keep trying, and if anyone gets to find something, please let me know... Javier. -- You received this message because you are subscribed to the Google Groups "loongson-dev" group. To post to this group, send email to loongson-dev@googlegroups.com. To unsubscribe from this group, send email to loongson-dev+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/loongson-dev?hl=en.
