Hello,
社区 2.6.38.2-stable 分支，使用默认配置文件编译得到的内核，声卡和无线都不工作。
--
Best regards!
Heiher
--
You received this message because you are subscribed to the Google Groups
"loongson-dev" group.
To post to this group, send email to loongson-dev@googlegroups.com.
To unsubscribe from this group, send email to
loongson-dev+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/loongson-dev?hl=en.
Linux archlinux 2.6.38.2 #1 PREEMPT Sun Apr 10 22:28:44 CST 2011 mips64 ICT
Loongson-2 V0.3 FPU V0.1 lemote-fuloong-2f-box GNU/Linux
Module Size Used by
fuse 105331 3
ipv6 418572 10
snd_seq_dummy 2823 0
snd_seq_oss 46034 0
snd_seq_midi_event 7236 1 snd_seq_oss
snd_seq 85820 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 7750 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 57049 0
snd_mixer_oss 20911 1 snd_pcm_oss
evdev 13154 3
snd_cs5535audio 12181 0
snd_ac97_codec 173568 1 snd_cs5535audio
ac97_bus 1230 1 snd_ac97_codec
snd_pcm 110426 3 snd_pcm_oss,snd_cs5535audio,snd_ac97_codec
usbhid 38269 0
snd_timer 27813 2 snd_seq,snd_pcm
r8169 55033 0
snd 83417 9
snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_cs5535audio,snd_ac97_codec,snd_pcm,snd_timer
loongson2_cpufreq 2523 0
soundcore 8451 1 snd
snd_page_alloc 7229 2 snd_cs5535audio,snd_pcm
sg 37982 0
Initializing cgroup subsys cpu
Linux version 2.6.38.2 (wangr@debian) (gcc version 4.4.1 (GCC for Cross-LFS
4.4.1.20090912) ) #1 PREEMPT Sun Apr 10 22:28:44 CST 2011
busclock=66000000, cpuclock=799980000, memsize=256, highmemsize=256
CPU revision is: 00006303 (ICT Loongson-2)
FPU revision is: 00000501
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 0000000010000000 @ 0000000000000000 (usable)
memory: 0000000030000000 @ 0000000010000000 (reserved)
memory: 0000000010000000 @ 0000000090000000 (usable)
memory: 0000000010000000 @ 0000000080000000 (reserved)
Initial ramdisk at: 0x9800000004000000 (1377130 bytes)
Zone PFN ranges:
Normal 0x00000000 -> 0x00028000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x00010000
0: 0x00020000 -> 0x00028000
On node 0 totalpages: 98304
Normal zone: 560 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 97744 pages, LIFO batch:7
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97744
Kernel command line: console=tty machtype=lemote-fuloong-2f-box quiet
root=/dev/sda2 video=sisfb:1024x768-16@60 resume=/dev/sda3
PMON_VER=LM6004-1.3.6 EC_VER=undefined machtype=lemote-fuloong-2f-box
rd_start=0x84000000 rd_size=0x15036a ide_core.ignore_cable=0
PID hash table entries: 4096 (order: 1, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
Primary instruction cache 64kB, VIPT, direct mapped, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 512kB 4-way, linesize 32 bytes.
Memory: 452368k/524288k available (5160k kernel code, 71920k reserved, 1392k
data, 224k init, 0k highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
NR_IRQS:128
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency..
799.98 BogoMIPS (lpj=1599960)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024
Checking for the daddi bug... no.
devtmpfs: initialized
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci 0000:00:06.0: [10ec:8169] type 0 class 0x000200
pci 0000:00:06.0: reg 10: [io 0xb100-0xb1ff]
pci 0000:00:06.0: reg 14: [mem 0x04075000-0x040750ff]
pci 0000:00:06.0: reg 30: [mem 0x04040000-0x0405ffff pref]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D1 D2 D3hot
pci 0000:00:06.0: PME# disabled
pci 0000:00:08.0: [1039:0325] type 0 class 0x000300
pci 0000:00:08.0: reg 10: [mem 0x40000000-0x4fffffff pref]
pci 0000:00:08.0: reg 14: [mem 0x04000000-0x0403ffff]
pci 0000:00:08.0: reg 18: [io 0xb300-0xb37f]
pci 0000:00:08.0: reg 30: [mem 0x04060000-0x0406ffff pref]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:0e.0: [1022:2090] type 0 class 0x000601
pci 0000:00:0e.0: reg 10: [io 0xb410-0xb417]
pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff]
pci 0000:00:0e.0: reg 18: [io 0xb380-0xb3bf]
pci 0000:00:0e.0: reg 20: [io 0xb280-0xb2ff]
pci 0000:00:0e.0: reg 24: [io 0xb3c0-0xb3df]
pci 0000:00:0e.2: [1022:209a] type 0 class 0x000101
pci 0000:00:0e.2: reg 20: [io 0xb400-0xb40f]
pci 0000:00:0e.3: [1022:2093] type 0 class 0x000401
pci 0000:00:0e.3: reg 10: [io 0xb200-0xb27f]
pci 0000:00:0e.4: [1022:2094] type 0 class 0x000c03
pci 0000:00:0e.4: reg 10: [mem 0x04074000-0x04074fff]
pci 0000:00:0e.5: [1022:2095] type 0 class 0x000c03
pci 0000:00:0e.5: reg 10: [mem 0x04073000-0x04073fff]
vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:08.0: BAR 0: assigned [mem 0x40000000-0x4fffffff pref]
pci 0000:00:08.0: BAR 0: set to [mem 0x40000000-0x4fffffff pref] (PCI address
[0x40000000-0x4fffffff])
pci 0000:00:08.0: BAR 1: assigned [mem 0x50000000-0x5003ffff]
pci 0000:00:08.0: BAR 1: set to [mem 0x50000000-0x5003ffff] (PCI address
[0x50000000-0x5003ffff])
pci 0000:00:06.0: BAR 6: assigned [mem 0x50040000-0x5005ffff pref]
pci 0000:00:06.0: BAR 6: set to [mem 0x50040000-0x5005ffff pref] (PCI address
[0x50040000-0x5005ffff])
pci 0000:00:08.0: BAR 6: assigned [mem 0x50060000-0x5006ffff pref]
pci 0000:00:08.0: BAR 6: set to [mem 0x50060000-0x5006ffff pref] (PCI address
[0x50060000-0x5006ffff])
pci 0000:00:0e.4: BAR 0: assigned [mem 0x50070000-0x50070fff]
pci 0000:00:0e.4: BAR 0: set to [mem 0x50070000-0x50070fff] (PCI address
[0x50070000-0x50070fff])
pci 0000:00:0e.5: BAR 0: assigned [mem 0x50071000-0x50071fff]
pci 0000:00:0e.5: BAR 0: set to [mem 0x50071000-0x50071fff] (PCI address
[0x50071000-0x50071fff])
pci 0000:00:06.0: BAR 0: assigned [io 0x4000-0x40ff]
pci 0000:00:06.0: BAR 0: set to [io 0x4000-0x40ff] (PCI address
[0x4000-0x40ff])
pci 0000:00:06.0: BAR 1: assigned [mem 0x50072000-0x500720ff]
pci 0000:00:06.0: BAR 1: set to [mem 0x50072000-0x500720ff] (PCI address
[0x50072000-0x500720ff])
pci 0000:00:0e.0: BAR 1: assigned [io 0x4400-0x44ff]
pci 0000:00:0e.0: BAR 1: set to [io 0x4400-0x44ff] (PCI address
[0x4400-0x44ff])
pci 0000:00:08.0: BAR 2: assigned [io 0x4800-0x487f]
pci 0000:00:08.0: BAR 2: set to [io 0x4800-0x487f] (PCI address
[0x4800-0x487f])
pci 0000:00:0e.0: BAR 4: assigned [io 0x4880-0x48ff]
pci 0000:00:0e.0: BAR 4: set to [io 0x4880-0x48ff] (PCI address
[0x4880-0x48ff])
pci 0000:00:0e.3: BAR 0: assigned [io 0x4c00-0x4c7f]
pci 0000:00:0e.3: BAR 0: set to [io 0x4c00-0x4c7f] (PCI address
[0x4c00-0x4c7f])
pci 0000:00:0e.0: BAR 2: assigned [io 0x4c80-0x4cbf]
pci 0000:00:0e.0: BAR 2: set to [io 0x4c80-0x4cbf] (PCI address
[0x4c80-0x4cbf])
pci 0000:00:0e.0: BAR 5: assigned [io 0x4cc0-0x4cdf]
pci 0000:00:0e.0: BAR 5: set to [io 0x4cc0-0x4cdf] (PCI address
[0x4cc0-0x4cdf])
pci 0000:00:0e.2: BAR 4: assigned [io 0x4ce0-0x4cef]
pci 0000:00:0e.2: BAR 4: set to [io 0x4ce0-0x4cef] (PCI address
[0x4ce0-0x4cef])
pci 0000:00:0e.0: BAR 0: assigned [io 0x4cf0-0x4cf7]
pci 0000:00:0e.0: BAR 0: set to [io 0x4cf0-0x4cf7] (PCI address
[0x4cf0-0x4cf7])
slot: 6, pin: 1, irq: 36
slot: 8, pin: 1, irq: 38
Switching to clocksource MIPS
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 3, 131072 bytes)
TCP established hash table entries: 65536 (order: 6, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 5, 524288 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 1, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 1, 32768 bytes)
NET: Registered protocol family 1
PCI: CLS 32 bytes, default 32
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1344k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1302447458.192:1): initialized
Btrfs loaded
msgmni has been set to 886
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
sisfb 0000:00:08.0: Invalid ROM contents
sisfb: Video ROM not found
sisfb: Video RAM at 0x40000000, mapped to 0x9000000040000000, size 32768k
sisfb: MMIO at 0x50000000, mapped to 0x9000000050000000, size 256k
sisfb: Memory heap starting at 32160K, size 32K
sisfb: CRT1 DDC supported
sisfb: CRT1 DDC level: 2
sisfb: Monitor range H 31-60KHz, V 60-75Hz, Max. dotclock 140MHz
sisfb: Default mode is 1024x768x16 (60Hz)
sisfb: Initial vbflags 0x0
Console: switching to colour frame buffer device 128x48
sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
fb0: SiS 315PRO frame buffer device version 1.8.9
sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
brd: module loaded
loop: module loaded
scsi0 : pata_cs5536
scsi1 : pata_cs5536
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4ce0 irq 14
ata2: DUMMY
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: Setting latency timer of device 0000:00:0e.5 to 64
ehci_hcd 0000:00:0e.5: EHCI Host Controller
ehci_hcd 0000:00:0e.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.5: irq 11, io mem 0x50071000
ehci_hcd 0000:00:0e.5: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Enabling device 0000:00:0e.4 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:0e.4 to 64
ohci_hcd 0000:00:0e.4: OHCI Host Controller
ohci_hcd 0000:00:0e.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.4: irq 11, io mem 0x50070000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: No controller found
Trying to free nonexistent resource <0000000000000060-000000000000006f>
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
TCP bic registered
TCP cubic registered
NET: Registered protocol family 17
ata1.00: ATA-8: SAMSUNG HM121HC, LS100-10, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM121HC LS10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2011-04-10 14:57:39 UTC (1302447459)
Freeing unused kernel memory: 224k freed
udev[471]: starting version 166
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-3: new low speed USB device using ohci_hcd and address 3
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
udev[770]: starting version 166
sd 0:0:0:0: Attached scsi generic sg0 type 0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:00:06.0: (unregistered net_device): no PCI Express capability
r8169 0000:00:06.0: eth0: RTL8169sc/8110sc at 0x9000000050072000,
00:23:9e:00:08:30, XID 18000000 IRQ 36
input: GASIA USB KB V11 as
/devices/pci0000:00/0000:00:0e.4/usb2/2-2/2-2:1.0/input/input0
generic-usb 0003:0E8F:0022.0001: input,hidraw0: USB HID v1.10 Keyboard [GASIA
USB KB V11] on usb-0000:00:0e.4-2/input0
input: GASIA USB KB V11 as
/devices/pci0000:00/0000:00:0e.4/usb2/2-2/2-2:1.1/input/input1
generic-usb 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Device [GASIA USB
KB V11] on usb-0000:00:0e.4-2/input1
input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:0e.4/usb2/2-3/2-3:1.0/input/input2
generic-usb 0003:046D:C019.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech
USB Optical Mouse] on usb-0000:00:0e.4-3/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
PCI: Setting latency timer of device 0000:00:0e.3 to 64
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Adding 1004032k swap on /dev/sda3. Priority:-1 extents:1 across:1004032k
------------[ cut here ]------------
WARNING: at kernel/printk.c:288 do_syslog+0x110/0x700()
Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated).
Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq
snd_seq_device snd_pcm_oss snd_mixer_oss evdev snd_cs5535audio snd_ac97_codec
ac97_bus snd_pcm usbhid snd_timer r8169 snd loongson2_cpufreq soundcore
snd_page_alloc sg
Call Trace:
[<ffffffff80702d34>] dump_stack+0x8/0x40
[<ffffffff8023c120>] warn_slowpath_common+0x78/0x160
[<ffffffff8023c2b0>] warn_slowpath_fmt+0x38/0x58
[<ffffffff8023cd08>] do_syslog+0x110/0x700
[<ffffffff803797bc>] proc_reg_open+0xb4/0x1e0
[<ffffffff8030f674>] __dentry_open+0x104/0x368
[<ffffffff80321b50>] finish_open+0xf0/0x208
[<ffffffff8032450c>] do_filp_open+0x314/0x7c0
[<ffffffff803107bc>] do_sys_open+0x74/0x198
[<ffffffff802194b8>] handle_sys+0x158/0x178
---[ end trace b8e686e97b433a39 ]---
NET: Registered protocol family 10
ioctl32(X:1189): Unknown cmd fd(11) cmd(8004f300){t:'ó';sz:4} arg(7f972f44) on
/dev/fb0
ioctl32(X:1189): Unknown cmd fd(11) cmd(80046ef8){t:'n';sz:4} arg(00604f38) on
/dev/fb0
sisfb 0000:00:08.0: Invalid ROM contents
r8169 0000:00:06.0: eth0: link up
sisfb 0000:00:08.0: Invalid ROM contents
sisfb 0000:00:08.0: Invalid ROM contents
eth0: no IPv6 routers present
fuse init (API version 7.16)
