Author: lattner
Date: Mon Jan 7 01:33:08 2008
New Revision: 45696
URL: http://llvm.org/viewvc/llvm-project?rev=45696&view=rev
Log:
split TargetInstrDesc out into its own header file.
Added:
llvm/trunk/include/llvm/Target/TargetInstrDesc.h
Modified:
llvm/trunk/include/llvm/Target/TargetInstrInfo.h
Added: llvm/trunk/include/llvm/Target/TargetInstrDesc.h
URL:
http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm/Target/TargetInstrDesc.h?rev=45696&view=auto
==============================================================================
--- llvm/trunk/include/llvm/Target/TargetInstrDesc.h (added)
+++ llvm/trunk/include/llvm/Target/TargetInstrDesc.h Mon Jan 7 01:33:08 2008
@@ -0,0 +1,414 @@
+//===-- llvm/Target/TargetInstrDesc.h - Instruction Descriptors -*- C++
-*-===//
+//
+// The LLVM Compiler Infrastructure
+//
+// This file is distributed under the University of Illinois Open Source
+// License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
+//
+// This file defines the TargetOperandInfo and TargetInstrDesc classes, which
+// are used to describe target instructions and their operands.
+//
+//===----------------------------------------------------------------------===//
+
+#ifndef LLVM_TARGET_TARGETINSTRDESC_H
+#define LLVM_TARGET_TARGETINSTRDESC_H
+
+#include <cassert>
+
+namespace llvm {
+
+//===----------------------------------------------------------------------===//
+// Machine Operand Flags and Description
+//===----------------------------------------------------------------------===//
+
+namespace TOI {
+ // Operand constraints: only "tied_to" for now.
+ enum OperandConstraint {
+ TIED_TO = 0 // Must be allocated the same register as.
+ };
+
+ /// OperandFlags - These are flags set on operands, but should be considered
+ /// private, all access should go through the TargetOperandInfo accessors.
+ /// See the accessors for a description of what these are.
+ enum OperandFlags {
+ LookupPtrRegClass = 0,
+ Predicate,
+ OptionalDef
+ };
+}
+
+/// TargetOperandInfo - This holds information about one operand of a machine
+/// instruction, indicating the register class for register operands, etc.
+///
+class TargetOperandInfo {
+public:
+ /// RegClass - This specifies the register class enumeration of the operand
+ /// if the operand is a register. If not, this contains 0.
+ unsigned short RegClass;
+ unsigned short Flags;
+ /// Lower 16 bits are used to specify which constraints are set. The higher
16
+ /// bits are used to specify the value of constraints (4 bits each).
+ unsigned int Constraints;
+ /// Currently no other information.
+
+ /// isLookupPtrRegClass - Set if this operand is a pointer value and it
+ /// requires a callback to look up its register class.
+ bool isLookupPtrRegClass() const { return Flags&(1
<<TOI::LookupPtrRegClass);}
+
+ /// isPredicate - Set if this is one of the operands that made up of
+ /// the predicate operand that controls an isPredicable() instruction.
+ bool isPredicate() const { return Flags & (1 << TOI::Predicate); }
+
+ /// isOptionalDef - Set if this operand is a optional def.
+ ///
+ bool isOptionalDef() const { return Flags & (1 << TOI::OptionalDef); }
+};
+
+
+//===----------------------------------------------------------------------===//
+// Machine Instruction Flags and Description
+//===----------------------------------------------------------------------===//
+
+/// TargetInstrDesc flags - These should be considered private to the
+/// implementation of the TargetInstrDesc class. Clients should use the
+/// predicate methods on TargetInstrDesc, not use these directly. These
+/// all correspond to bitfields in the TargetInstrDesc::Flags field.
+namespace TID {
+ enum {
+ Variadic = 0,
+ HasOptionalDef,
+ Return,
+ Call,
+ ImplicitDef,
+ Barrier,
+ Terminator,
+ Branch,
+ IndirectBranch,
+ Predicable,
+ NotDuplicable,
+ DelaySlot,
+ SimpleLoad,
+ MayStore,
+ NeverHasSideEffects,
+ MayHaveSideEffects,
+ Commutable,
+ ConvertibleTo3Addr,
+ UsesCustomDAGSchedInserter,
+ Rematerializable
+ };
+}
+
+/// TargetInstrDesc - Describe properties that are true of each
+/// instruction in the target description file. This captures information
about
+/// side effects, register use and many other things. There is one instance of
+/// this struct for each target instruction class, and the MachineInstr class
+/// points to this struct directly to describe itself.
+class TargetInstrDesc {
+public:
+ unsigned short Opcode; // The opcode number.
+ unsigned short NumOperands; // Num of args (may be more if variable_ops)
+ unsigned short NumDefs; // Num of args that are definitions.
+ unsigned short SchedClass; // enum identifying instr sched class
+ const char * Name; // Name of the instruction record in td file.
+ unsigned Flags; // flags identifying machine instr class
+ unsigned TSFlags; // Target Specific Flag values
+ const unsigned *ImplicitUses; // Registers implicitly read by this instr
+ const unsigned *ImplicitDefs; // Registers implicitly defined by this instr
+ const TargetOperandInfo *OpInfo; // 'NumOperands' entries about operands.
+
+ /// getOperandConstraint - Returns the value of the specific constraint if
+ /// it is set. Returns -1 if it is not set.
+ int getOperandConstraint(unsigned OpNum,
+ TOI::OperandConstraint Constraint) const {
+ assert((OpNum < NumOperands || isVariadic()) &&
+ "Invalid operand # of TargetInstrInfo");
+ if (OpNum < NumOperands &&
+ (OpInfo[OpNum].Constraints & (1 << Constraint))) {
+ unsigned Pos = 16 + Constraint * 4;
+ return (int)(OpInfo[OpNum].Constraints >> Pos) & 0xf;
+ }
+ return -1;
+ }
+
+ /// findTiedToSrcOperand - Returns the operand that is tied to the specified
+ /// dest operand. Returns -1 if there isn't one.
+ int findTiedToSrcOperand(unsigned OpNum) const;
+
+ /// getOpcode - Return the opcode number for this descriptor.
+ unsigned getOpcode() const {
+ return Opcode;
+ }
+
+ /// getName - Return the name of the record in the .td file for this
+ /// instruction, for example "ADD8ri".
+ const char *getName() const {
+ return Name;
+ }
+
+ /// getNumOperands - Return the number of declared MachineOperands for this
+ /// MachineInstruction. Note that variadic (isVariadic() returns true)
+ /// instructions may have additional operands at the end of the list, and
note
+ /// that the machine instruction may include implicit register def/uses as
+ /// well.
+ unsigned getNumOperands() const {
+ return NumOperands;
+ }
+
+ /// getNumDefs - Return the number of MachineOperands that are register
+ /// definitions. Register definitions always occur at the start of the
+ /// machine operand list. This is the number of "outs" in the .td file.
+ unsigned getNumDefs() const {
+ return NumDefs;
+ }
+
+ /// isVariadic - Return true if this instruction can have a variable number
of
+ /// operands. In this case, the variable operands will be after the normal
+ /// operands but before the implicit definitions and uses (if any are
+ /// present).
+ bool isVariadic() const {
+ return Flags & (1 << TID::Variadic);
+ }
+
+ /// hasOptionalDef - Set if this instruction has an optional definition, e.g.
+ /// ARM instructions which can set condition code if 's' bit is set.
+ bool hasOptionalDef() const {
+ return Flags & (1 << TID::HasOptionalDef);
+ }
+
+ /// getImplicitUses - Return a list of machine operands that are potentially
+ /// read by any instance of this machine instruction. For example, on X86,
+ /// the "adc" instruction adds two register operands and adds the carry bit
in
+ /// from the flags register. In this case, the instruction is marked as
+ /// implicitly reading the flags. Likewise, the variable shift instruction
on
+ /// X86 is marked as implicitly reading the 'CL' register, which it always
+ /// does.
+ ///
+ /// This method returns null if the instruction has no implicit uses.
+ const unsigned *getImplicitUses() const {
+ return ImplicitUses;
+ }
+
+ /// getImplicitDefs - Return a list of machine operands that are potentially
+ /// written by any instance of this machine instruction. For example, on
X86,
+ /// many instructions implicitly set the flags register. In this case, they
+ /// are marked as setting the FLAGS. Likewise, many instructions always
+ /// deposit their result in a physical register. For example, the X86 divide
+ /// instruction always deposits the quotient and remainder in the EAX/EDX
+ /// registers. For that instruction, this will return a list containing the
+ /// EAX/EDX/EFLAGS registers.
+ ///
+ /// This method returns null if the instruction has no implicit uses.
+ const unsigned *getImplicitDefs() const {
+ return ImplicitDefs;
+ }
+
+ /// getSchedClass - Return the scheduling class for this instruction. The
+ /// scheduling class is an index into the InstrItineraryData table. This
+ /// returns zero if there is no known scheduling information for the
+ /// instruction.
+ ///
+ unsigned getSchedClass() const {
+ return SchedClass;
+ }
+
+ bool isReturn() const {
+ return Flags & (1 << TID::Return);
+ }
+
+ bool isCall() const {
+ return Flags & (1 << TID::Call);
+ }
+
+ /// isImplicitDef - Return true if this is an "IMPLICIT_DEF" instruction,
+ /// which defines a register to an unspecified value. These basically
+ /// correspond to x = undef.
+ bool isImplicitDef() const {
+ return Flags & (1 << TID::ImplicitDef);
+ }
+
+ /// isBarrier - Returns true if the specified instruction stops control flow
+ /// from executing the instruction immediately following it. Examples
include
+ /// unconditional branches and return instructions.
+ bool isBarrier() const {
+ return Flags & (1 << TID::Barrier);
+ }
+
+ /// isTerminator - Returns true if this instruction part of the terminator
for
+ /// a basic block. Typically this is things like return and branch
+ /// instructions.
+ ///
+ /// Various passes use this to insert code into the bottom of a basic block,
+ /// but before control flow occurs.
+ bool isTerminator() const {
+ return Flags & (1 << TID::Terminator);
+ }
+
+ /// isBranch - Returns true if this is a conditional, unconditional, or
+ /// indirect branch. Predicates below can be used to discriminate between
+ /// these cases, and the TargetInstrInfo::AnalyzeBranch method can be used to
+ /// get more information.
+ bool isBranch() const {
+ return Flags & (1 << TID::Branch);
+ }
+
+ /// isIndirectBranch - Return true if this is an indirect branch, such as a
+ /// branch through a register.
+ bool isIndirectBranch() const {
+ return Flags & (1 << TID::IndirectBranch);
+ }
+
+ /// isConditionalBranch - Return true if this is a branch which may fall
+ /// through to the next instruction or may transfer control flow to some
other
+ /// block. The TargetInstrInfo::AnalyzeBranch method can be used to get more
+ /// information about this branch.
+ bool isConditionalBranch() const {
+ return isBranch() & !isBarrier() & !isIndirectBranch();
+ }
+
+ /// isUnconditionalBranch - Return true if this is a branch which always
+ /// transfers control flow to some other block. The
+ /// TargetInstrInfo::AnalyzeBranch method can be used to get more information
+ /// about this branch.
+ bool isUnconditionalBranch() const {
+ return isBranch() & isBarrier() & !isIndirectBranch();
+ }
+
+ // isPredicable - Return true if this instruction has a predicate operand
that
+ // controls execution. It may be set to 'always', or may be set to other
+ /// values. There are various methods in TargetInstrInfo that can be used
to
+ /// control and modify the predicate in this instruction.
+ bool isPredicable() const {
+ return Flags & (1 << TID::Predicable);
+ }
+
+ /// isNotDuplicable - Return true if this instruction cannot be safely
+ /// duplicated. For example, if the instruction has a unique labels attached
+ /// to it, duplicating it would cause multiple definition errors.
+ bool isNotDuplicable() const {
+ return Flags & (1 << TID::NotDuplicable);
+ }
+
+ /// hasDelaySlot - Returns true if the specified instruction has a delay slot
+ /// which must be filled by the code generator.
+ bool hasDelaySlot() const {
+ return Flags & (1 << TID::DelaySlot);
+ }
+
+ /// isSimpleLoad - Return true for instructions that are simple loads from
+ /// memory. This should only be set on instructions that load a value from
+ /// memory and return it in their only virtual register definition.
+ /// Instructions that return a value loaded from memory and then modified in
+ /// some way should not return true for this.
+ bool isSimpleLoad() const {
+ return Flags & (1 << TID::SimpleLoad);
+ }
+
+
//===--------------------------------------------------------------------===//
+ // Side Effect Analysis
+
//===--------------------------------------------------------------------===//
+
+ /// mayStore - Return true if this instruction could possibly modify memory.
+ /// Instructions with this flag set are not necessarily simple store
+ /// instructions, they may store a modified value based on their operands, or
+ /// may not actually modify anything, for example.
+ bool mayStore() const {
+ return Flags & (1 << TID::MayStore);
+ }
+
+ // TODO: mayLoad.
+
+ /// hasNoSideEffects - Return true if all instances of this instruction are
+ /// guaranteed to have no side effects other than:
+ /// 1. The register operands that are def/used by the MachineInstr.
+ /// 2. Registers that are implicitly def/used by the MachineInstr.
+ /// 3. Memory Accesses captured by mayLoad() or mayStore().
+ ///
+ /// Examples of other side effects would be calling a function, modifying
+ /// 'invisible' machine state like a control register, etc.
+ ///
+ /// If some instances of this instruction are side-effect free but others are
+ /// not, the hasConditionalSideEffects() property should return true, not
this
+ /// one.
+ ///
+ /// Note that you should not call this method directly, instead, call the
+ /// TargetInstrInfo::hasUnmodelledSideEffects method, which handles analysis
+ /// of the machine instruction.
+ bool hasNoSideEffects() const {
+ return Flags & (1 << TID::NeverHasSideEffects);
+ }
+
+ /// hasConditionalSideEffects - Return true if some instances of this
+ /// instruction are guaranteed to have no side effects other than those
listed
+ /// for hasNoSideEffects(). To determine whether a specific machineinstr has
+ /// side effects, the TargetInstrInfo::isReallySideEffectFree virtual method
+ /// is invoked to decide.
+ ///
+ /// Note that you should not call this method directly, instead, call the
+ /// TargetInstrInfo::hasUnmodelledSideEffects method, which handles analysis
+ /// of the machine instruction.
+ bool hasConditionalSideEffects() const {
+ return Flags & (1 << TID::MayHaveSideEffects);
+ }
+
+
//===--------------------------------------------------------------------===//
+ // Flags that indicate whether an instruction can be modified by a method.
+
//===--------------------------------------------------------------------===//
+
+ /// isCommutable - Return true if this may be a 2- or 3-address
+ /// instruction (of the form "X = op Y, Z, ..."), which produces the same
+ /// result if Y and Z are exchanged. If this flag is set, then the
+ /// TargetInstrInfo::commuteInstruction method may be used to hack on the
+ /// instruction.
+ ///
+ /// Note that this flag may be set on instructions that are only commutable
+ /// sometimes. In these cases, the call to commuteInstruction will fail.
+ /// Also note that some instructions require non-trivial modification to
+ /// commute them.
+ bool isCommutable() const {
+ return Flags & (1 << TID::Commutable);
+ }
+
+ /// isConvertibleTo3Addr - Return true if this is a 2-address instruction
+ /// which can be changed into a 3-address instruction if needed. Doing this
+ /// transformation can be profitable in the register allocator, because it
+ /// means that the instruction can use a 2-address form if possible, but
+ /// degrade into a less efficient form if the source and dest register cannot
+ /// be assigned to the same register. For example, this allows the x86
+ /// backend to turn a "shl reg, 3" instruction into an LEA instruction, which
+ /// is the same speed as the shift but has bigger code size.
+ ///
+ /// If this returns true, then the target must implement the
+ /// TargetInstrInfo::convertToThreeAddress method for this instruction, which
+ /// is allowed to fail if the transformation isn't valid for this specific
+ /// instruction (e.g. shl reg, 4 on x86).
+ ///
+ bool isConvertibleTo3Addr() const {
+ return Flags & (1 << TID::ConvertibleTo3Addr);
+ }
+
+ /// usesCustomDAGSchedInsertionHook - Return true if this instruction
requires
+ /// custom insertion support when the DAG scheduler is inserting it into a
+ /// machine basic block. If this is true for the instruction, it basically
+ /// means that it is a pseudo instruction used at SelectionDAG time that is
+ /// expanded out into magic code by the target when MachineInstrs are formed.
+ ///
+ /// If this is true, the TargetLoweringInfo::InsertAtEndOfBasicBlock method
+ /// is used to insert this into the MachineBasicBlock.
+ bool usesCustomDAGSchedInsertionHook() const {
+ return Flags & (1 << TID::UsesCustomDAGSchedInserter);
+ }
+
+ /// isRematerializable - Returns true if this instruction is a candidate for
+ /// remat. This flag is deprecated, please don't use it anymore. If this
+ /// flag is set, the isReallyTriviallyReMaterializable() method is called to
+ /// verify the instruction is really rematable.
+ bool isRematerializable() const {
+ return Flags & (1 << TID::Rematerializable);
+ }
+};
+
+} // end namespace llvm
+
+#endif
Modified: llvm/trunk/include/llvm/Target/TargetInstrInfo.h
URL:
http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm/Target/TargetInstrInfo.h?rev=45696&r1=45695&r2=45696&view=diff
==============================================================================
--- llvm/trunk/include/llvm/Target/TargetInstrInfo.h (original)
+++ llvm/trunk/include/llvm/Target/TargetInstrInfo.h Mon Jan 7 01:33:08 2008
@@ -14,11 +14,8 @@
#ifndef LLVM_TARGET_TARGETINSTRINFO_H
#define LLVM_TARGET_TARGETINSTRINFO_H
-#include "llvm/CodeGen/MachineBasicBlock.h"
+#include "llvm/Target/TargetInstrDesc.h"
#include "llvm/CodeGen/MachineFunction.h"
-#include "llvm/Support/DataTypes.h"
-#include <vector>
-#include <cassert>
namespace llvm {
@@ -30,396 +27,6 @@
template<class T> class SmallVectorImpl;
-//===----------------------------------------------------------------------===//
-// Machine Operand Flags and Description
-//===----------------------------------------------------------------------===//
-
-namespace TOI {
- // Operand constraints: only "tied_to" for now.
- enum OperandConstraint {
- TIED_TO = 0 // Must be allocated the same register as.
- };
-
- /// OperandFlags - These are flags set on operands, but should be considered
- /// private, all access should go through the TargetOperandInfo accessors.
- /// See the accessors for a description of what these are.
- enum OperandFlags {
- LookupPtrRegClass = 0,
- Predicate,
- OptionalDef
- };
-}
-
-/// TargetOperandInfo - This holds information about one operand of a machine
-/// instruction, indicating the register class for register operands, etc.
-///
-class TargetOperandInfo {
-public:
- /// RegClass - This specifies the register class enumeration of the operand
- /// if the operand is a register. If not, this contains 0.
- unsigned short RegClass;
- unsigned short Flags;
- /// Lower 16 bits are used to specify which constraints are set. The higher
16
- /// bits are used to specify the value of constraints (4 bits each).
- unsigned int Constraints;
- /// Currently no other information.
-
- /// isLookupPtrRegClass - Set if this operand is a pointer value and it
- /// requires a callback to look up its register class.
- bool isLookupPtrRegClass() const { return Flags&(1
<<TOI::LookupPtrRegClass);}
-
- /// isPredicate - Set if this is one of the operands that made up of
- /// the predicate operand that controls an isPredicable() instruction.
- bool isPredicate() const { return Flags & (1 << TOI::Predicate); }
-
- /// isOptionalDef - Set if this operand is a optional def.
- ///
- bool isOptionalDef() const { return Flags & (1 << TOI::OptionalDef); }
-};
-
-
-//===----------------------------------------------------------------------===//
-// Machine Instruction Flags and Description
-//===----------------------------------------------------------------------===//
-
-/// TargetInstrDesc flags - These should be considered private to the
-/// implementation of the TargetInstrDesc class. Clients should use the
-/// predicate methods on TargetInstrDesc, not use these directly. These
-/// all correspond to bitfields in the TargetInstrDesc::Flags field.
-namespace TID {
- enum {
- Variadic = 0,
- HasOptionalDef,
- Return,
- Call,
- ImplicitDef,
- Barrier,
- Terminator,
- Branch,
- IndirectBranch,
- Predicable,
- NotDuplicable,
- DelaySlot,
- SimpleLoad,
- MayStore,
- NeverHasSideEffects,
- MayHaveSideEffects,
- Commutable,
- ConvertibleTo3Addr,
- UsesCustomDAGSchedInserter,
- Rematerializable
- };
-}
-
-/// TargetInstrDesc - Describe properties that are true of each
-/// instruction in the target description file. This captures information
about
-/// side effects, register use and many other things. There is one instance of
-/// this struct for each target instruction class, and the MachineInstr class
-/// points to this struct directly to describe itself.
-class TargetInstrDesc {
-public:
- unsigned short Opcode; // The opcode number.
- unsigned short NumOperands; // Num of args (may be more if variable_ops)
- unsigned short NumDefs; // Num of args that are definitions.
- unsigned short SchedClass; // enum identifying instr sched class
- const char * Name; // Name of the instruction record in td file.
- unsigned Flags; // flags identifying machine instr class
- unsigned TSFlags; // Target Specific Flag values
- const unsigned *ImplicitUses; // Registers implicitly read by this instr
- const unsigned *ImplicitDefs; // Registers implicitly defined by this instr
- const TargetOperandInfo *OpInfo; // 'NumOperands' entries about operands.
-
- /// getOperandConstraint - Returns the value of the specific constraint if
- /// it is set. Returns -1 if it is not set.
- int getOperandConstraint(unsigned OpNum,
- TOI::OperandConstraint Constraint) const {
- assert((OpNum < NumOperands || isVariadic()) &&
- "Invalid operand # of TargetInstrInfo");
- if (OpNum < NumOperands &&
- (OpInfo[OpNum].Constraints & (1 << Constraint))) {
- unsigned Pos = 16 + Constraint * 4;
- return (int)(OpInfo[OpNum].Constraints >> Pos) & 0xf;
- }
- return -1;
- }
-
- /// findTiedToSrcOperand - Returns the operand that is tied to the specified
- /// dest operand. Returns -1 if there isn't one.
- int findTiedToSrcOperand(unsigned OpNum) const;
-
- /// getOpcode - Return the opcode number for this descriptor.
- unsigned getOpcode() const {
- return Opcode;
- }
-
- /// getName - Return the name of the record in the .td file for this
- /// instruction, for example "ADD8ri".
- const char *getName() const {
- return Name;
- }
-
- /// getNumOperands - Return the number of declared MachineOperands for this
- /// MachineInstruction. Note that variadic (isVariadic() returns true)
- /// instructions may have additional operands at the end of the list, and
note
- /// that the machine instruction may include implicit register def/uses as
- /// well.
- unsigned getNumOperands() const {
- return NumOperands;
- }
-
- /// getNumDefs - Return the number of MachineOperands that are register
- /// definitions. Register definitions always occur at the start of the
- /// machine operand list. This is the number of "outs" in the .td file.
- unsigned getNumDefs() const {
- return NumDefs;
- }
-
- /// isVariadic - Return true if this instruction can have a variable number
of
- /// operands. In this case, the variable operands will be after the normal
- /// operands but before the implicit definitions and uses (if any are
- /// present).
- bool isVariadic() const {
- return Flags & (1 << TID::Variadic);
- }
-
- /// hasOptionalDef - Set if this instruction has an optional definition, e.g.
- /// ARM instructions which can set condition code if 's' bit is set.
- bool hasOptionalDef() const {
- return Flags & (1 << TID::HasOptionalDef);
- }
-
- /// getImplicitUses - Return a list of machine operands that are potentially
- /// read by any instance of this machine instruction. For example, on X86,
- /// the "adc" instruction adds two register operands and adds the carry bit
in
- /// from the flags register. In this case, the instruction is marked as
- /// implicitly reading the flags. Likewise, the variable shift instruction
on
- /// X86 is marked as implicitly reading the 'CL' register, which it always
- /// does.
- ///
- /// This method returns null if the instruction has no implicit uses.
- const unsigned *getImplicitUses() const {
- return ImplicitUses;
- }
-
- /// getImplicitDefs - Return a list of machine operands that are potentially
- /// written by any instance of this machine instruction. For example, on
X86,
- /// many instructions implicitly set the flags register. In this case, they
- /// are marked as setting the FLAGS. Likewise, many instructions always
- /// deposit their result in a physical register. For example, the X86 divide
- /// instruction always deposits the quotient and remainder in the EAX/EDX
- /// registers. For that instruction, this will return a list containing the
- /// EAX/EDX/EFLAGS registers.
- ///
- /// This method returns null if the instruction has no implicit uses.
- const unsigned *getImplicitDefs() const {
- return ImplicitDefs;
- }
-
- /// getSchedClass - Return the scheduling class for this instruction. The
- /// scheduling class is an index into the InstrItineraryData table. This
- /// returns zero if there is no known scheduling information for the
- /// instruction.
- ///
- unsigned getSchedClass() const {
- return SchedClass;
- }
-
- bool isReturn() const {
- return Flags & (1 << TID::Return);
- }
-
- bool isCall() const {
- return Flags & (1 << TID::Call);
- }
-
- /// isImplicitDef - Return true if this is an "IMPLICIT_DEF" instruction,
- /// which defines a register to an unspecified value. These basically
- /// correspond to x = undef.
- bool isImplicitDef() const {
- return Flags & (1 << TID::ImplicitDef);
- }
-
- /// isBarrier - Returns true if the specified instruction stops control flow
- /// from executing the instruction immediately following it. Examples
include
- /// unconditional branches and return instructions.
- bool isBarrier() const {
- return Flags & (1 << TID::Barrier);
- }
-
- /// isTerminator - Returns true if this instruction part of the terminator
for
- /// a basic block. Typically this is things like return and branch
- /// instructions.
- ///
- /// Various passes use this to insert code into the bottom of a basic block,
- /// but before control flow occurs.
- bool isTerminator() const {
- return Flags & (1 << TID::Terminator);
- }
-
- /// isBranch - Returns true if this is a conditional, unconditional, or
- /// indirect branch. Predicates below can be used to discriminate between
- /// these cases, and the TargetInstrInfo::AnalyzeBranch method can be used to
- /// get more information.
- bool isBranch() const {
- return Flags & (1 << TID::Branch);
- }
-
- /// isIndirectBranch - Return true if this is an indirect branch, such as a
- /// branch through a register.
- bool isIndirectBranch() const {
- return Flags & (1 << TID::IndirectBranch);
- }
-
- /// isConditionalBranch - Return true if this is a branch which may fall
- /// through to the next instruction or may transfer control flow to some
other
- /// block. The TargetInstrInfo::AnalyzeBranch method can be used to get more
- /// information about this branch.
- bool isConditionalBranch() const {
- return isBranch() & !isBarrier() & !isIndirectBranch();
- }
-
- /// isUnconditionalBranch - Return true if this is a branch which always
- /// transfers control flow to some other block. The
- /// TargetInstrInfo::AnalyzeBranch method can be used to get more information
- /// about this branch.
- bool isUnconditionalBranch() const {
- return isBranch() & isBarrier() & !isIndirectBranch();
- }
-
- // isPredicable - Return true if this instruction has a predicate operand
that
- // controls execution. It may be set to 'always', or may be set to other
- /// values. There are various methods in TargetInstrInfo that can be used
to
- /// control and modify the predicate in this instruction.
- bool isPredicable() const {
- return Flags & (1 << TID::Predicable);
- }
-
- /// isNotDuplicable - Return true if this instruction cannot be safely
- /// duplicated. For example, if the instruction has a unique labels attached
- /// to it, duplicating it would cause multiple definition errors.
- bool isNotDuplicable() const {
- return Flags & (1 << TID::NotDuplicable);
- }
-
- /// hasDelaySlot - Returns true if the specified instruction has a delay slot
- /// which must be filled by the code generator.
- bool hasDelaySlot() const {
- return Flags & (1 << TID::DelaySlot);
- }
-
- /// isSimpleLoad - Return true for instructions that are simple loads from
- /// memory. This should only be set on instructions that load a value from
- /// memory and return it in their only virtual register definition.
- /// Instructions that return a value loaded from memory and then modified in
- /// some way should not return true for this.
- bool isSimpleLoad() const {
- return Flags & (1 << TID::SimpleLoad);
- }
-
-
//===--------------------------------------------------------------------===//
- // Side Effect Analysis
-
//===--------------------------------------------------------------------===//
-
- /// mayStore - Return true if this instruction could possibly modify memory.
- /// Instructions with this flag set are not necessarily simple store
- /// instructions, they may store a modified value based on their operands, or
- /// may not actually modify anything, for example.
- bool mayStore() const {
- return Flags & (1 << TID::MayStore);
- }
-
- // TODO: mayLoad.
-
- /// hasNoSideEffects - Return true if all instances of this instruction are
- /// guaranteed to have no side effects other than:
- /// 1. The register operands that are def/used by the MachineInstr.
- /// 2. Registers that are implicitly def/used by the MachineInstr.
- /// 3. Memory Accesses captured by mayLoad() or mayStore().
- ///
- /// Examples of other side effects would be calling a function, modifying
- /// 'invisible' machine state like a control register, etc.
- ///
- /// If some instances of this instruction are side-effect free but others are
- /// not, the hasConditionalSideEffects() property should return true, not
this
- /// one.
- ///
- /// Note that you should not call this method directly, instead, call the
- /// TargetInstrInfo::hasUnmodelledSideEffects method, which handles analysis
- /// of the machine instruction.
- bool hasNoSideEffects() const {
- return Flags & (1 << TID::NeverHasSideEffects);
- }
-
- /// hasConditionalSideEffects - Return true if some instances of this
- /// instruction are guaranteed to have no side effects other than those
listed
- /// for hasNoSideEffects(). To determine whether a specific machineinstr has
- /// side effects, the TargetInstrInfo::isReallySideEffectFree virtual method
- /// is invoked to decide.
- ///
- /// Note that you should not call this method directly, instead, call the
- /// TargetInstrInfo::hasUnmodelledSideEffects method, which handles analysis
- /// of the machine instruction.
- bool hasConditionalSideEffects() const {
- return Flags & (1 << TID::MayHaveSideEffects);
- }
-
-
//===--------------------------------------------------------------------===//
- // Flags that indicate whether an instruction can be modified by a method.
-
//===--------------------------------------------------------------------===//
-
- /// isCommutable - Return true if this may be a 2- or 3-address
- /// instruction (of the form "X = op Y, Z, ..."), which produces the same
- /// result if Y and Z are exchanged. If this flag is set, then the
- /// TargetInstrInfo::commuteInstruction method may be used to hack on the
- /// instruction.
- ///
- /// Note that this flag may be set on instructions that are only commutable
- /// sometimes. In these cases, the call to commuteInstruction will fail.
- /// Also note that some instructions require non-trivial modification to
- /// commute them.
- bool isCommutable() const {
- return Flags & (1 << TID::Commutable);
- }
-
- /// isConvertibleTo3Addr - Return true if this is a 2-address instruction
- /// which can be changed into a 3-address instruction if needed. Doing this
- /// transformation can be profitable in the register allocator, because it
- /// means that the instruction can use a 2-address form if possible, but
- /// degrade into a less efficient form if the source and dest register cannot
- /// be assigned to the same register. For example, this allows the x86
- /// backend to turn a "shl reg, 3" instruction into an LEA instruction, which
- /// is the same speed as the shift but has bigger code size.
- ///
- /// If this returns true, then the target must implement the
- /// TargetInstrInfo::convertToThreeAddress method for this instruction, which
- /// is allowed to fail if the transformation isn't valid for this specific
- /// instruction (e.g. shl reg, 4 on x86).
- ///
- bool isConvertibleTo3Addr() const {
- return Flags & (1 << TID::ConvertibleTo3Addr);
- }
-
- /// usesCustomDAGSchedInsertionHook - Return true if this instruction
requires
- /// custom insertion support when the DAG scheduler is inserting it into a
- /// machine basic block. If this is true for the instruction, it basically
- /// means that it is a pseudo instruction used at SelectionDAG time that is
- /// expanded out into magic code by the target when MachineInstrs are formed.
- ///
- /// If this is true, the TargetLoweringInfo::InsertAtEndOfBasicBlock method
- /// is used to insert this into the MachineBasicBlock.
- bool usesCustomDAGSchedInsertionHook() const {
- return Flags & (1 << TID::UsesCustomDAGSchedInserter);
- }
-
- /// isRematerializable - Returns true if this instruction is a candidate for
- /// remat. This flag is deprecated, please don't use it anymore. If this
- /// flag is set, the isReallyTriviallyReMaterializable() method is called to
- /// verify the instruction is really rematable.
- bool isRematerializable() const {
- return Flags & (1 << TID::Rematerializable);
- }
-};
-
//---------------------------------------------------------------------------
///
_______________________________________________
llvm-commits mailing list
llvm-commits@cs.uiuc.edu
http://lists.cs.uiuc.edu/mailman/listinfo/llvm-commits
