Check the interface settings, is it negotiating, 10mbit? status, interfaces?
On Tue, Feb 7, 2017 at 11:59 PM, Øyvind 'bolt' Hvidsten <[email protected]> wrote: > I have an SG-1000 on which I experience very low throughput. > > When I plug my laptop to the cable that normally goes into the SG-1000's > WAN port, I get a download speed of roughtly 100mbit (ISP limited) when I > run "curl http://ipv4.download.thinkbroadband.com/1GB.zip >/dev/null" > > Plugging that same cable into the SG-1000 and connecting my laptop > directly to its LAN port instead, I get less than 10mbit. > > Running the curl command directly on the console of the SG-1000 gives me > the same abysmal result. > > [2.4.0-BETA][[email protected]]/root: curl > http://ipv4.download.thinkbroadband.com/1GB.zip >/dev/null > % Total % Received % Xferd Average Speed Time Time Time > Current > Dload Upload Total Spent Left > Speed > 2 1024M 2 29.5M 0 0 598k 0 0:29:10 0:00:50 0:28:20 > 523k > > This is after I just flashed it with today's image (20170207) and ran > through the setup wizard in the browser. No other settings have been > altered. > > What can I do here? > > > Best regards, > Øyvind Hvidsten > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
