What hardware are you using? Specifically what model if it’s a netgate? On Sep 16, 2014, at 1:53, Victor Gamov <[email protected]> wrote:
> Hi All! > > I have pfsense-2.1.3 with configuration like following: > — one physical interface > — 10 VLANs. All VLANs are OPTx interface (interfaces marked as LAN or WAN by > pfsense are disabled) > — 2 VLANs used to Multi-WAN connection > — 3-4 virtual IP (IP-address aliases) at WAN VLANs > — about 150 aliases with fixed IP and/or DNS-names > — about 25 NAT port-forward rules (from WAN to other interfaces) > — about 20 floating rules > — many rules for every VLAN > > My problem is following. When I add alias or firewall rule and apply it then > port-forward via address aliases at WAN VLANs is not worked about 1-10 > minutes. Sometimes no incoming traffic on this interfaces (looks like no ARP > entries at provider router for this address). Sometimes traffic blocked by > default rule (looks like no other rules installed some minutes) > > > So my question: is it network/hardware/software problem or it pfsense > feature? (this is my first pfsense installation and first PF experience — I > use FreeBSD and IPFW many years before without any problems) > > Thanks! > > -- > CU, > Victor Gamov > [email protected] > > > > > _______________________________________________ > List mailing list > [email protected] > https://lists.pfsense.org/mailman/listinfo/list _______________________________________________ List mailing list [email protected] https://lists.pfsense.org/mailman/listinfo/list
