Hello All I am trying to use Pfsense as my premier router to connect my office with other branch offices on a provider's layer 3 MPLS network. I have disabled all NAT and packet filtering on both of my Pfsense boxes. Also uncheck block private schemes on my WAN interfaces as the ip schemes my MPLS provider uses are private ones.
Below is my scenario all I want is help what to define in my static routes or should I use dynamic routing protocols for this ? IP Settings given by MPLS provider Site 1 IP 10.152.8.130 Subnet 255.255.255.252 GW 10.152.8.129 Site 2 IP 10.152.8.118 Subnet 255.255.255.252 GW 10.152.8.117 Local Network IP settings Site 1 IP 172.16.0.0 Subnet 255.255.0.0 All clients in Site 1 use 172.16.1.16 (Pfsense) as its default gateway it is also connected with MPLS network with above given settings Site 2 IP 172.16.11.0 Subnet 255.255.0.0 All clients in Site 2 use 172.16.11.17 (Pfsense) as its default gateway it is also connected with MPLS network with above given settings Requirement . Clients on both sites should be able to access each other. . Clients on both the Sites should use 172.16.1.16 for their internet needs Thanks Faisal _______________________________________________ List mailing list [email protected] https://lists.pfsense.org/mailman/listinfo/list
