On 21 Dec 2012, at 16:01, Mark Olliver <[email protected]> wrote: > Hi, > > The routing table for my mac the openvpn client is: > Routing tables > > Internet: > Destination Gateway Flags Refs Use Netif > Expire > default 192.168.0.1 UGSc 17 0 en0 > default tun0 UCSI 0 0 tun0 > 10 10.208.11.253 UGSc 2 13 tun0 > 10.208.11/25 10.208.11.253 UGSc 0 74 tun0 > 10.208.11.248/29 10.208.11.253 UGSc 1 0 tun0 > 10.208.11.253 10.208.11.254 UH 5 0 tun0 > 127 127.0.0.1 UCS 0 0 lo0 > 127.0.0.1 127.0.0.1 UH 9 598251 lo0 > 169.254 link#4 UCS 0 0 en0 > 192.168.0 link#4 UCS 4 0 en0 > 192.168.0.1 3c:81:d8:9c:d0:2d UHLWIir 18 286 en0 > 1189 > 192.168.0.2 127.0.0.1 UHS 1 3 lo0 > 192.168.0.3 0:c:29:1d:73:ff UHLWIi 1 7 en0 > 1178 > 192.168.0.250 0:22:15:4b:a6:83 UHLWIi 2 233 en0 > 1092 > 192.168.0.255 ff:ff:ff:ff:ff:ff UHLWbI 0 3 en0 > 192.168.84 link#10 UC 2 0 vmnet8 > 192.168.84.1 0:50:56:c0:0:8 UHLWIi 1 9336 lo0 > 192.168.84.255 ff:ff:ff:ff:ff:ff UHLWbI 0 5 vmnet8 > 192.168.171 link#9 UC 2 0 vmnet1 > 192.168.171.1 0:50:56:c0:0:1 UHLWIi 1 9336 lo0 > 192.168.171.255 ff:ff:ff:ff:ff:ff UHLWbI 0 5 vmnet1 > > > The routing table for my pfsense box is: $ netstat -rn Routing tables
Internet: Destination Gateway Flags Refs Use Netif Expire default 10.208.11.1 US 0 6450 ale0_v 10.208.11.0/25 link#12 U 0 24955 ale0_v 10.208.11.1 link#12 UHS 0 3750 lo0 10.208.11.248/29 10.208.11.250 UGS 0 17 ovpns2 10.208.11.249 link#14 UHS 0 0 lo0 10.208.11.250 link#14 UH 0 0 ovpns2 89.167.208.4 192.168.0.1 UGHS 0 2397 ale0_v 127.0.0.1 link#9 UH 0 158 lo0 192.168.0.0/24 link#11 U 0 5667 ale0_v 192.168.0.250 link#11 UHS 0 2 lo0 192.168.1.0/24 link#13 U 0 3567 ale0_v 192.168.1.1 link#13 UHS 0 0 lo0 > > Regards > > Mark > > > On 21 Dec 2012, at 15:54, WolfSec-Support <[email protected]> wrote: > >> hi, >> >> please post your routing table of both openvpn / pfsense boxes >> >> regards >> stephan >> >> >> 2012/12/21 Mark Olliver <[email protected]> >> Hi, >> >> I have an OpenVPN connection setup where my LAN ip range is 192.168.10.0/25 >> and my OpenVPN vpn range is 192.168.10.248/29. These are two distinct >> networks and do not overlap. They do however fit within one /24 which is >> what I need as I have IPSEC tunnels configured using 192.168.10.0/24 as >> their LAN source. My problem is that whilst on the OpenVPN connection I can >> talk to and thing over the IPSEC connection I can not talk to my local >> 192.168.10.0/25 network. >> >> Looking at the logs OpenVPN is saying there is a conflict and that the LANs >> overlap, for some reason it is thinking my LAN is 192.168.10.0/24. >> >> Any ideas how i can override openvpn and get it to recognise the correct >> settings. >> >> Thanks >> >> Mark >> _______________________________________________ >> List mailing list >> [email protected] >> http://lists.pfsense.org/mailman/listinfo/list >> >> >> >> -- >> >> Stephan Wolf >> >> WolfSec >> Rairing 65 >> CH-8108 Dällikon >> >> +41 43 536 1191 >> +41 76 566 8222 >> http://www.wolfsec.ch _______________________________________________ >> List mailing list >> [email protected] >> http://lists.pfsense.org/mailman/listinfo/list >
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
