On 8/1/2012 6:00 AM, Maykel Franco Hernández wrote: > I try configure the ipsec for remote connection. I need write in the > local network in phase 2 a local network different to LAN. But, I > configured the local network in phase 2 a ip different to LAN and not > appear the button connect in status ipsec tunnels....
The connect button only shows up if you have an IP on the firewall inside the other subnet. It isn't necessary. Once some traffic that matches the Phase 2 hits the firewall, it will try to bring the tunnel up. So if you have a system inside that other subnet, just try to ping from there to the far side of the tunnel and it will attempt to connect the tunnel. Beyond that you haven't provided enough detail about what you have and what you're trying to accomplish to give a reasonable response. Jim _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
