Am 14.02.12 14:20, schrieb Jim Pingle: > On 2/14/2012 8:14 AM, Udo Müller wrote: >> tap works fine after adding "dev tap1" as configuration option. > > That isn't right. There is a drop-down to choose tap mode. There are > many assumptions in the GUI that will do the wrong thing if you specify > that manually.
At least the openvpn server starts without problems. Having that removed there is no start possible: OpenVPN 2.2.0 i386-portbld-freebsd8.1 [SSL] [LZO2] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Aug 11 2011 openvpn[55758]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts openvpn[55758]: TUN/TAP device /dev/tap1 opened openvpn[55758]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 openvpn[55758]: /sbin/ifconfig ovpns1 10.22.1.1 netmask 255.255.255.0 mtu 1500 up openvpn[55758]: FreeBSD ifconfig failed: external program exited with error status: 1 openvpn[55758]: Exiting ifconfig error: # /sbin/ifconfig ovpns1 10.22.1.1 netmask 255.255.255.0 mtu 1500 up ifconfig: ioctl (SIOCAIFADDR): Destination address required What happens after installing the fix? is there documentation i can read in order to know what's changed? Regards Udo _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
